Melola Discovery

← Melola Discovery

Akses terbuka Jurnal SINTA 1

Green Polyols from Tamanu Seed Oil: Reaction Kinetics and Process Optimization

Communications in Science and Technology · Vol. 10 No. 2 (2025) · hlm. 336–342

DOI
10.21924/cst.10.2.2025.1749
ISSN
2502-9266, 2502-9258
Terbit
2025-12-31
Penerbit
Komunitas Ilmuwan dan Profesional Muslim Indonesia
Bahasa
eng
Lisensi
creativecommons.org/licenses/by/4.0

Abstrak

Using methanol, this study examined the hydroxylation process of epoxidized tamanu seed oil (ETSO), with an oxirane number of 3.92 to 4.04 mmol/g, under the catalyzation of sulfuric acid (H2SO4). The objectives of this study were, first, to synthesize polyol from ETSO, and, second, determine how temperature and catalyst concentration play a role in the hydroxylation process. During the experiment, a second-order reaction kinetic model was used for analysis. The hydroxylation process was conducted in a batch reactor for 4 hours under constant temperatures and stirring speed. During the experiment, the samples were taken every 30 minutes. The oxirane number of ETSO and the concentration of polyols were used to the reaction rates. The optimal conditions were found at a temperature of 65°C, with a methanol-to-epoxide mole ratio of 4:1 and a catalyst concentration of 3%. The pre-exponential factor (A) and the calculated activation energy (Ea) were found to be 59,041.74 g.mmol-1.min-1 and 44.69 kJ/mol, respectively. This research, therefore, has successfully identified the optimal conditions for the synthesis of bio-based polyols from tamanu oil.

Kata kunci

Jaringan kolaborasi para penulis

26 penulis · 77 tautan kepenulisan bersama · 25 lintas organisasi

Arahkan kursor atau ketuk sebuah nama untuk menyorot rekan penulisnya. Klik dua kali untuk membuka halaman penulis.

  • Muhammadiyah University of Surakarta
  • State University of Malang
  • Universitas Gadjah Mada
  • Universitas Halu Oleo
  • Universiti Teknologi MARA
  • Universiti Teknologi Petronas
  • Muhammadiyah University of Yogyakarta
  • Afiliasi tidak diketahui
  • Organisasi berbeda
  • Organisasi sama
  • Afiliasi tidak diketahui
  • Garis lebih tebal = lebih banyak artikel bersama · lingkaran lebih besar = lebih banyak artikel
Tampilkan sebagai tabel
Rekan penulisOrganisasiArtikel bersama
Arief Taufik BudimanUniversitas Gadjah Mada2
Rochmadi RochmadiUniversitas Gadjah Mada2
Budhijanto BudhijantoUniversitas Gadjah Mada2
Hartini HartiniUniversitas Halu Oleo1
Rezania AsyfiradayatiMuhammadiyah University of Surakarta1
Jenita Berlian NindyasariMuhammadiyah University of Surakarta1
Siti Rohana Mohd YatimUniversiti Teknologi MARA1
Mitoriana PorusiaMuhammadiyah University of Surakarta1
Muhammad Rivandi AthayaMuhammadiyah University of Surakarta1
Afnan Zain MuzakkiMuhammadiyah University of Surakarta1
Nandang MuftiState University of Malang1
Poppy PuspitasariState University of Malang1
Diki Dwi PramonoState University of Malang1
Ahmad Atif FikriState University of Malang1
Deny Yudo WahyudiState University of Malang1
Maizatul Shima ShaharunUniversiti Teknologi Petronas1
Kiki Adi KurniaAfiliasi tidak diketahui1
Sabtanti HarimurtiMuhammadiyah University of Yogyakarta1
Abdul Aziz OmarAfiliasi tidak diketahui1
Thanabalan MurugesanAfiliasi tidak diketahui1

Afiliasi berasal dari OpenAlex; metadata OAI-PMH jurnal tidak memuatnya. Penulis tanpa ID OpenAlex dicocokkan berdasarkan nama, sehingga dua orang bisa tergabung atau satu orang bisa terpisah.

Sumber metadata: OAI-PMH (metadata jurnal) https://cst.kipmi.or.id/oai, pertama di-harvest 8 Nov 2026, terakhir terlihat 16 Nov 2026.
Metadata asli (oai_dc)
<oai_dc:dc xmlns="http://www.openarchives.org/OAI/2.0/" xmlns:dc="http://purl.org/dc/elements/1.1/" xmlns:oai_dc="http://www.openarchives.org/OAI/2.0/oai_dc/" xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance" xsi:schemaLocation="http://www.openarchives.org/OAI/2.0/oai_dc/  http://www.openarchives.org/OAI/2.0/oai_dc.xsd">
	<dc:title xml:lang="en-US">Green Polyols from Tamanu Seed Oil: Reaction Kinetics and Process Optimization</dc:title>
	<dc:creator>Budiyati, Eni</dc:creator>
	<dc:creator>Habibburohman, Mohammad Sofyan</dc:creator>
	<dc:creator>Fauzi, Nur Ahmad</dc:creator>
	<dc:creator>Wasi, Muhammad Azim</dc:creator>
	<dc:creator>Musthofa, Malik</dc:creator>
	<dc:creator>Ur rahmah, Anisa</dc:creator>
	<dc:subject xml:lang="en-US">hydroxylation</dc:subject>
	<dc:subject xml:lang="en-US">mole ratio</dc:subject>
	<dc:subject xml:lang="en-US">polyol concentration</dc:subject>
	<dc:subject xml:lang="en-US">oxirane number</dc:subject>
	<dc:subject xml:lang="en-US">temperature</dc:subject>
	<dc:description xml:lang="en-US">Using methanol, this study examined the hydroxylation process of epoxidized tamanu seed oil (ETSO), with an oxirane number of 3.92 to 4.04 mmol/g, under the catalyzation of sulfuric acid (H2SO4). The objectives of this study were, first, to synthesize polyol from ETSO, and, second, determine how temperature and catalyst concentration play a role in the hydroxylation process. During the experiment, a second-order reaction kinetic model was used for analysis. The hydroxylation process was conducted in a batch reactor for 4 hours under constant temperatures and stirring speed. During the experiment, the samples were taken every 30 minutes. The oxirane number of ETSO and the concentration of polyols were used to the reaction rates. The optimal conditions were found at a temperature of 65°C, with a methanol-to-epoxide mole ratio of 4:1 and a catalyst concentration of 3%. The pre-exponential factor (A) and the calculated activation energy (Ea) were found to be 59,041.74 g.mmol-1.min-1 and 44.69 kJ/mol, respectively. This research, therefore, has successfully identified the optimal conditions for the synthesis of bio-based polyols from tamanu oil.</dc:description>
	<dc:publisher xml:lang="en-US">Komunitas Ilmuwan dan Profesional Muslim Indonesia</dc:publisher>
	<dc:date>2025-12-31</dc:date>
	<dc:type>info:eu-repo/semantics/article</dc:type>
	<dc:type>info:eu-repo/semantics/publishedVersion</dc:type>
	<dc:format>application/pdf</dc:format>
	<dc:identifier>https://cst.kipmi.or.id/journal/article/view/1749</dc:identifier>
	<dc:identifier>10.21924/cst.10.2.2025.1749</dc:identifier>
	<dc:source xml:lang="en-US">Communications in Science and Technology; Vol. 10 No. 2 (2025); 336-342</dc:source>
	<dc:source xml:lang="id-ID">Communications in Science and Technology; Vol 10 No 2 (2025); 336-342</dc:source>
	<dc:source>2502-9266</dc:source>
	<dc:source>2502-9258</dc:source>
	<dc:source>10.21924/cst.10.2.2025</dc:source>
	<dc:language>eng</dc:language>
	<dc:relation>https://cst.kipmi.or.id/journal/article/view/1749/237</dc:relation>
	<dc:rights xml:lang="en-US">Copyright (c) 2025 Communications in Science and Technology</dc:rights>
	<dc:rights xml:lang="en-US">http://creativecommons.org/licenses/by/4.0</dc:rights>
</oai_dc:dc>