Jurnal SINTA 1
Sifat fisik hidroksiapatit sintesis kalsit sebagai bahan pengisi pada sealer saluran akar resin epoxy (Physical properties of calcite synthesized hydroxyapatite as the filler of epoxy-resin-based root canal sealer)
Dental Journal (Majalah Kedokteran Gigi) · Vol. 46 No. 4 (2013) · hlm. 207–212
- ISSN
- 2442-9740, 1978-3728
- Terbit
- 2013-12-01
- Penerbit
- Faculty of Dental Medicine, Universitas Airlangga https://fkg.unair.ac.id/en
- Bahasa
- eng
Abstrak
Background: The filler addition to resin based sealers will enhance the physical properties of the polymer. Because of its biological properties, the synthetic hydroxyapatite (HA) has been proposed as filler for dental material such as composite resin. The calcite synthesized HA is the HA produced of calcite minerals that came from many Indonesian mining. Purpose: The aim of study was to determine the effect of different concentration of calcite synthesized HA as the filler of the epoxy-resin-based root canal sealer on the physical properties such as its contact angle, the film thickness and the microhardness. Methods: The crystal of the calcite synthesized hydroxyapatite with the size between 77.721-88.710 nm and the ratio of Ca/P 1.6886 were synthesized at Ceramic Laboratory, Mechanical Engineering, using wet method of hydrothermal microwave. The powders of the epoxy- resin were prepared by added the synthesized hydroxyapatite crystal in 5 different weight ratios (e.g.: HA-10%, HA-20%, HA-30%, HA-40% and HA-50%). Each of these was mixed with the paste of 3:1 ratio using spatula on a glass plate until homogen and then measuring the contact angle and the film thickness. Microhardness test was conducted after the mixture of experimental sealer was stored for 24 hrs at 37 oC to reach perfect polymerization. Results: All of contact angles were <90o and were not significantly different to each other (p= 0.510). All groups had a film thickness in accordance with ISO 6876 (<50 um) and with no statistical difference (p= 0.858). In the HA of 10%, 20%, 30% seen that the microhardness were increased, while in the HA-50% was decreased and in the HA-40% has the same microhardness to the control groups (HA-0%). Conclusion: Calcite synthesized HA as the filler did not affect contact angle and film thickness of the sealer. Microhardness of the epoxy-resin based sealer could be increased using maximum 30% of the calcite synthesized HA as the filler.Latar belakang: Penambahan bahan pengisi pada sealer berbahan dasar resin akan meningkatkan sifat fisik polimer. Karena sifat biologis bagus, hidroksiapatit (HA) sintetis digunakan sebagai bahan pengisi material kedokteran gigi seperti resin komposit. Hidroksiapatit sintesis kalsit merupakan HA yang hasilkan dari mineral kalsit berasal dari berbagai daerah pertambangan di Indonesia. Tujuan: Penelitian ini bertujuan untuk meneliti pengaruh berbagai konsentrasi HA sintesis kalsit sebagai bahan pengisi sealer berbahan dasar resin epoksi terhadap sifat fisiknya yaitu sudut kontak, ketebalan film dan kekerasan mikronya. Metode: Kristal HA sintesis kalsit yang berukuran 7,721-88,710 nm dengan rasio Ca/P 1,6886 diperoleh dari sintesis di Laboratorium Keramik, Teknik Mesin, Universitas Gadjah Mada menggunakan wet method dengan microwave hidrotermal. Serbuk resin epoksi dipersiapkan dengan menambahkan kristal HA sintesis kalsit dalam lima konsentrasi yang berbeda yaitu HA-10%, HA-20%, HA-30%, HA-40% dan HA-50% (dalam berat). Masing-masing serbuk diaduk dengan pasta resin epoksi dengan perbandingan 3:1 menggunakan spatula di atas glassplate hingga homogen, selanjutnya dilakukan pengukuran sudut kontak dan ketebalan film. Pengukuran kekerasan mikro dilakukan setelah sealer disimpan dalam inkubator 37 oC selama 24 jam sehingga mencapai polimerisasi sempurna. Hasil: Semua kelompok menunjukkan bahwa sudut kontak <90o dan menunjukkan tidak ada perbedaan yang signifikan (p=0,510). Semua kelompok menunjukkan bahwa ketebalan filmnya sesuai dengan ISO 6876 (<50 um) dan menunjukkan tidak ada perbedaan yang signifikan (p=0,858). Pada kelompok HA-10%, 20% dan 30% kekerasan mikronya meningkat, sedangkan pada HA-50% menurun dan HA-40% kekerasannya sama dengan kelompok kontrol (HA-0%). Simpulan: Penambahan hingga 50% HA sintesis kalsit sebagai bahan pengisi sealer resin epoksi tidak mempengaruhi sudut kontak dan ketebalan film. Kekerasan sealer dapat ditingkatkan dengan menambahkan HA sintesis kalsit maksimum hingga 30%.
Kata kunci
Jaringan kolaborasi para penulis
40 penulis · 94 tautan kepenulisan bersama · 12 lintas organisasi · menampilkan 40 yang paling banyak terhubung
Arahkan kursor atau ketuk sebuah nama untuk menyorot rekan penulisnya. Klik dua kali untuk membuka halaman penulis.
- Universitas Gadjah Mada
- Universiti Sains Malaysia
- Universitas Jember
- Universiti Brunei Darussalam
- Organisasi berbeda
- Organisasi sama
- Afiliasi tidak diketahui
- Garis lebih tebal = lebih banyak artikel bersama · lingkaran lebih besar = lebih banyak artikel
Tampilkan sebagai tabel
| Rekan penulis | Organisasi | Artikel bersama |
|---|---|---|
| Dyah Irnawati | Universitas Gadjah Mada | 4 |
| Nuryono Nuryono | Universitas Gadjah Mada | 3 |
| Tetiana Haniastuti | Universitas Gadjah Mada | 2 |
| Widowati Siswomihardjo | Universitas Gadjah Mada | 2 |
| Widya Asmara | Universitas Gadjah Mada | 2 |
| Yulita Kristanti | Universitas Gadjah Mada | 2 |
| Tunjung Nugraheni | Universitas Gadjah Mada | 2 |
| Niswati Fathmah Rosyida | Universitas Gadjah Mada | 1 |
| Pinandi Sri Pudyani | Universitas Gadjah Mada | 1 |
| Marsetyawan H. N. E. Soesatyo | Universitas Gadjah Mada | 1 |
| Archadian Nuryanti | Universitas Gadjah Mada | 1 |
| Dewi Agustina | Universitas Gadjah Mada | 1 |
| Stefany Elan Saktiyawardani | Universitas Gadjah Mada | 1 |
| Hardono Jaya Lauson | Universitas Gadjah Mada | 1 |
| Anugerah Pekerti Astamurtiningrum | Universitas Gadjah Mada | 1 |
| Mahadna Aulia Rahmah | Universitas Gadjah Mada | 1 |
| Pramana Pananja Putra | Universitas Gadjah Mada | 1 |
| Nadie Fatimatuzzahro | Universitas Jember | 1 |
| Ardiny Andriani | Universitas Gadjah Mada | 1 |
| Alizatul Khairani Hasan | Universitas Gadjah Mada | 1 |
| Sudibyo Sudibyo | Universitas Gadjah Mada | 1 |
| Ahmad Syaify | Universitas Gadjah Mada | 1 |
| Suryono Suryono | Universitas Jember | 1 |
| Widowati Witjaksono | Universiti Sains Malaysia | 1 |
| Lin Naing | Universiti Brunei Darussalam | 1 |
| Samsudin Ar | Universiti Sains Malaysia | 1 |
| Mon Mon Tin‐Oo | Universiti Sains Malaysia | 1 |
| Sri Kavi Subramaniam | Universitas Gadjah Mada | 1 |
| Dhinintya Hyta Narissi | Universitas Gadjah Mada | 1 |
| Dyah Anindya Widyasrini | Universitas Gadjah Mada | 1 |
| Wayan Tunas Artama | Universitas Gadjah Mada | 1 |
| Sri Budi Barunawati | Universitas Gadjah Mada | 1 |
| Suparyono Saleh | Universitas Gadjah Mada | 1 |
| Yosi Bayu Murti | Universitas Gadjah Mada | 1 |
| Harsini | Universitas Gadjah Mada | 1 |
| Widjijono | Universitas Gadjah Mada | 1 |
Afiliasi berasal dari OpenAlex; metadata OAI-PMH jurnal tidak memuatnya. Penulis tanpa ID OpenAlex dicocokkan berdasarkan nama, sehingga dua orang bisa tergabung atau satu orang bisa terpisah.