Melola Discovery

← Melola Discovery

Jurnal SINTA 1

Mechanical properties of carving wax with various Ca-bentolite filter composition

Dental Journal (Majalah Kedokteran Gigi) · Vol. 42 No. 3 (2009) · hlm. 114–117

DOI
10.20473/j.djmkg.v42.i3.p114-117
ISSN
2442-9740, 1978-3728
Terbit
2009-09-01
Penerbit
Faculty of Dental Medicine, Universitas Airlangga https://fkg.unair.ac.id/en
Bahasa
eng

Abstrak

Background: The carving wax is used as a medium in dental anatomy study. This wax composes of many waxes and sometimes a filler is added. Carving wax is not sold in Indonesian market. Whereas the gradients of carving wax such as beeswax, paraffin and bentonite are abundant in Indonesia. Based on that fact, to make high quality and standard,the exact composition if this carving wax should be known. Purpose: The aim of this study was to investigate the effect of carving wax composition with Ca-bentonite filler on the melting point, hardness, and thermal expansion. Methods: Five carving wax compositions were made with paraffin, Ca-bentonite, carnauba wax, and beeswax in ratio (% weight): 50:20:25:5 (KI), 55:15:25:5 (KII), 60:10:25:5 (KIII), 65:5:25:5 (KIV), 70:0:25:5(KV). All components were melted, then poured into the melting point, hardness, and thermal expansion moulds (n = 5). Three carving wax properties were tested: melting point by melting point apparatus; hardness by penetrometer; thermal expansion by digital sliding caliper. The data were analyzed statistically using One-Way ANOVA and LSD0.05. Result: The Ca-bentonite addition influenced the melting point and thermal expansion of carving wax with significant differences between KI and other groups (p < 0.05). Ca-bentonite addition influenced the carving wax hardness and the mean differences among the groups were significant (p < 0.05). Conclusion: Ca-bentonite filler addition on the composition of carving wax influenced the physical and mechanical properties. The carving wax with high Ca-bentonite concentration had high melting point and hardness, but low thermal expansion.

Kata kunci

Jaringan kolaborasi para penulis

17 penulis · 46 tautan kepenulisan bersama · 10 lintas organisasi

Arahkan kursor atau ketuk sebuah nama untuk menyorot rekan penulisnya. Klik dua kali untuk membuka halaman penulis.

  • Universitas Gadjah Mada
  • Muhammadiyah University of Yogyakarta
  • Institut Ilmu Kesehatan Bhakti Wiyata
  • Organisasi berbeda
  • Organisasi sama
  • Afiliasi tidak diketahui
  • Garis lebih tebal = lebih banyak artikel bersama · lingkaran lebih besar = lebih banyak artikel
Tampilkan sebagai tabel
Rekan penulisOrganisasiArtikel bersama
Siti SunarintyasUniversitas Gadjah Mada4
Catur SeptommyInstitut Ilmu Kesehatan Bhakti Wiyata1
Rini DharmastitiUniversitas Gadjah Mada1
Alizatul Khairani HasanUniversitas Gadjah Mada1
Widya AsmaraUniversitas Gadjah Mada1
Nuryono NuryonoUniversitas Gadjah Mada1
Dwi Aji NugrohoMuhammadiyah University of Yogyakarta1
Wijayanti Dwi AastutiUniversitas Gadjah Mada1
Dana ArdianataMuhammadiyah University of Yogyakarta1
HarsiniUniversitas Gadjah Mada1
Widowati SiswomihardjoUniversitas Gadjah Mada1
WidjijonoUniversitas Gadjah Mada1
Mohammad Imanuddin YasnawiUniversitas Gadjah Mada1
Dhea Maurilla VeraniUniversitas Gadjah Mada1

Afiliasi berasal dari OpenAlex; metadata OAI-PMH jurnal tidak memuatnya. Penulis tanpa ID OpenAlex dicocokkan berdasarkan nama, sehingga dua orang bisa tergabung atau satu orang bisa terpisah.

Sumber metadata: OAI-PMH (metadata jurnal) https://e-journal.unair.ac.id/MKG/oai, pertama di-harvest 8 Nov 2026, terakhir terlihat 8 Nov 2026.
Metadata asli (oai_dc)
<oai_dc:dc xmlns="http://www.openarchives.org/OAI/2.0/" xmlns:dc="http://purl.org/dc/elements/1.1/" xmlns:oai_dc="http://www.openarchives.org/OAI/2.0/oai_dc/" xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance" xsi:schemaLocation="http://www.openarchives.org/OAI/2.0/oai_dc/  http://www.openarchives.org/OAI/2.0/oai_dc.xsd">
	<dc:title xml:lang="en-US">Mechanical properties of carving wax with various Ca-bentolite filter composition</dc:title>
	<dc:creator>Widjijono, Widjijono</dc:creator>
	<dc:creator>Agustiono, Purwanto</dc:creator>
	<dc:creator>Irnawati, Dyah</dc:creator>
	<dc:subject xml:lang="en-US">carving wax</dc:subject>
	<dc:subject xml:lang="en-US">Ca-bentonite</dc:subject>
	<dc:subject xml:lang="en-US">melting point</dc:subject>
	<dc:subject xml:lang="en-US">hardness</dc:subject>
	<dc:subject xml:lang="en-US">thermal expansion</dc:subject>
	<dc:description xml:lang="en-US">Background: The carving wax is used as a medium in dental anatomy study. This wax composes of many waxes and sometimes a filler is added. Carving wax is not sold in Indonesian market. Whereas the gradients of carving wax such as beeswax, paraffin and bentonite are abundant in Indonesia. Based on that fact, to make high quality and standard,the exact composition if this carving wax should be known. Purpose: The aim of this study was to investigate the effect of carving wax composition with Ca-bentonite filler on the melting point, hardness, and thermal expansion. Methods: Five carving wax compositions were made with paraffin, Ca-bentonite, carnauba wax, and beeswax in ratio (% weight): 50:20:25:5 (KI), 55:15:25:5 (KII), 60:10:25:5 (KIII), 65:5:25:5 (KIV), 70:0:25:5(KV). All components were melted, then poured into the melting point, hardness, and thermal expansion moulds (n = 5). Three carving wax properties were tested: melting point by melting point apparatus; hardness by penetrometer; thermal expansion by digital sliding caliper. The data were analyzed statistically using One-Way ANOVA and LSD0.05. Result: The Ca-bentonite addition influenced the melting point and thermal expansion of carving wax with significant differences between KI and other groups (p &amp;lt; 0.05). Ca-bentonite addition influenced the carving wax hardness and the mean differences among the groups were significant (p &amp;lt; 0.05). Conclusion: Ca-bentonite filler addition on the composition of carving wax influenced the physical and mechanical properties. The carving wax with high Ca-bentonite concentration had high melting point and hardness, but low thermal expansion.</dc:description>
	<dc:publisher xml:lang="en-US">Faculty of Dental Medicine, Universitas Airlangga https://fkg.unair.ac.id/en</dc:publisher>
	<dc:date>2009-09-01</dc:date>
	<dc:type>info:eu-repo/semantics/article</dc:type>
	<dc:type>info:eu-repo/semantics/publishedVersion</dc:type>
	<dc:type xml:lang="en-US">Peer-reviewed Article</dc:type>
	<dc:format>application/pdf</dc:format>
	<dc:identifier>https://e-journal.unair.ac.id/MKG/article/view/947</dc:identifier>
	<dc:identifier>10.20473/j.djmkg.v42.i3.p114-117</dc:identifier>
	<dc:source xml:lang="en-US">Dental Journal (Majalah Kedokteran Gigi); Vol. 42 No. 3 (2009): September 2009; 114-117</dc:source>
	<dc:source>2442-9740</dc:source>
	<dc:source>1978-3728</dc:source>
	<dc:language>eng</dc:language>
	<dc:relation>https://e-journal.unair.ac.id/MKG/article/view/947/732</dc:relation>
	<dc:rights xml:lang="en-US">Copyright (c) 2015 Dental Journal (Majalah Kedokteran Gigi)</dc:rights>
</oai_dc:dc>