Melola Discovery

← Melola Discovery

Jurnal SINTA 1

Effect of pressure and polishing technique on surface roughness of cold cured acrylic resin

Dental Journal (Majalah Kedokteran Gigi) · Vol. 40 No. 2 (2007) · hlm. 81–84

DOI
10.20473/j.djmkg.v40.i2.p81-84
ISSN
2442-9740, 1978-3728
Terbit
2007-06-01
Penerbit
Faculty of Dental Medicine, Universitas Airlangga https://fkg.unair.ac.id/en
Bahasa
eng

Abstrak

The smoothness of acrylic surface plays an important role in producing removable orthodontic appliances. Int this study, we examine the effect of pressure and polishing technique on surface roughness of cold cured acrylic resin. Forty eight samples were prepared and classified into two groups: acrylic resin polymerization with and without pressure. Each group was classified into four subgroups: being polished with abrasive stone, bur for acrylic, silicone polisher and without being polished as control group. Surface roughness was measured using surface roughness tester. The surface roughness of polymerized acrylic with and without pressure and polished with different technique was analyzed using One-Way ANOVA, continued by Dunnet test. T-test was done to know whether there was the effect of pressure on surface roughness after being polished using certain technique. The result showed that pressure and polishing technique affected surface roughness significantly (p = 0.001). On the group of polymerization with pressure, surface roughness resulted from polishing with bur of acrylic showed significant difference with silicone polisher, whereas on the group without pressure, polishing with bur of acrylic showed significant difference with abrasive stone. Of the three polishing techniques, there was significant difference of surface roughness of cold cured acrylic resin (t = 0.002). It is concluded that pressure and polishing technique affected the surface roughness of cold cured acrylic resin. Polishing technique using bur of acrylic, followed by abrasive paper, rotating felt cone and soft brush showed less surface roughness on the group of polymerization with or without pressure.

Kata kunci

Jaringan kolaborasi para penulis

8 penulis · 10 tautan kepenulisan bersama

Arahkan kursor atau ketuk sebuah nama untuk menyorot rekan penulisnya. Klik dua kali untuk membuka halaman penulis.

  • Universitas Airlangga
  • Organisasi berbeda
  • Organisasi sama
  • Afiliasi tidak diketahui
  • Garis lebih tebal = lebih banyak artikel bersama · lingkaran lebih besar = lebih banyak artikel
Tampilkan sebagai tabel
Rekan penulisOrganisasiArtikel bersama
Thalca HamidUniversitas Airlangga1
Melisa BudipramanaUniversitas Airlangga1
Rizka Amelia MayasariUniversitas Airlangga1
Ahmad SjafeiUniversitas Airlangga1
Achmad SjafeiUniversitas Airlangga1
Elly RusdianaUniversitas Airlangga1
Dini SetyowatiUniversitas Airlangga1

Afiliasi berasal dari OpenAlex; metadata OAI-PMH jurnal tidak memuatnya. Penulis tanpa ID OpenAlex dicocokkan berdasarkan nama, sehingga dua orang bisa tergabung atau satu orang bisa terpisah.

Sumber metadata: OAI-PMH (metadata jurnal) https://e-journal.unair.ac.id/MKG/oai, pertama di-harvest 8 Nov 2026, terakhir terlihat 8 Nov 2026.
Metadata asli (oai_dc)
<oai_dc:dc xmlns="http://www.openarchives.org/OAI/2.0/" xmlns:dc="http://purl.org/dc/elements/1.1/" xmlns:oai_dc="http://www.openarchives.org/OAI/2.0/oai_dc/" xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance" xsi:schemaLocation="http://www.openarchives.org/OAI/2.0/oai_dc/  http://www.openarchives.org/OAI/2.0/oai_dc.xsd">
	<dc:title xml:lang="en-US">Effect of pressure and polishing technique on surface roughness of cold cured acrylic resin</dc:title>
	<dc:creator>Goenharto, Sianiwati</dc:creator>
	<dc:subject xml:lang="en-US">polymerization</dc:subject>
	<dc:subject xml:lang="en-US">pressure and polishing technique</dc:subject>
	<dc:subject xml:lang="en-US">cold cured acrylic</dc:subject>
	<dc:description xml:lang="en-US">The smoothness of acrylic surface plays an important role in producing removable orthodontic appliances. Int this study, we examine the effect of pressure and polishing technique on surface roughness of cold cured acrylic resin. Forty eight samples were prepared and classified into two groups: acrylic resin polymerization with and without pressure. Each group was classified into four subgroups: being polished with abrasive stone, bur for acrylic, silicone polisher and without being polished as control group. Surface roughness was measured using surface roughness tester. The surface roughness of polymerized acrylic with and without pressure and polished with different technique was analyzed using One-Way ANOVA, continued by Dunnet test. T-test was done to know whether there was the effect of pressure on surface roughness after being polished using certain technique. The result showed that pressure and polishing technique affected surface roughness significantly (p = 0.001). On the group of polymerization with pressure, surface roughness resulted from polishing with bur of acrylic showed significant difference with silicone polisher, whereas on the group without pressure, polishing with bur of acrylic showed significant difference with abrasive stone. Of the three polishing techniques, there was significant difference of surface roughness of cold cured acrylic resin (t = 0.002). It is concluded that pressure and polishing technique affected the surface roughness of cold cured acrylic resin. Polishing technique using bur of acrylic, followed by abrasive paper, rotating felt cone and soft brush showed less surface roughness on the group of polymerization with or without pressure.</dc:description>
	<dc:publisher xml:lang="en-US">Faculty of Dental Medicine, Universitas Airlangga https://fkg.unair.ac.id/en</dc:publisher>
	<dc:date>2007-06-01</dc:date>
	<dc:type>info:eu-repo/semantics/article</dc:type>
	<dc:type>info:eu-repo/semantics/publishedVersion</dc:type>
	<dc:type xml:lang="en-US">Peer-reviewed Article</dc:type>
	<dc:format>application/pdf</dc:format>
	<dc:identifier>https://e-journal.unair.ac.id/MKG/article/view/1058</dc:identifier>
	<dc:identifier>10.20473/j.djmkg.v40.i2.p81-84</dc:identifier>
	<dc:source xml:lang="en-US">Dental Journal (Majalah Kedokteran Gigi); Vol. 40 No. 2 (2007): June 2007; 81-84</dc:source>
	<dc:source>2442-9740</dc:source>
	<dc:source>1978-3728</dc:source>
	<dc:language>eng</dc:language>
	<dc:relation>https://e-journal.unair.ac.id/MKG/article/view/1058/841</dc:relation>
	<dc:rights xml:lang="en-US">Copyright (c) 2015 Dental Journal (Majalah Kedokteran Gigi)</dc:rights>
</oai_dc:dc>