Melola Discovery

← Melola Discovery

Jurnal SINTA 1

A comparison of three dimensional change in maxillary complete dentures between conventional heat polymerizing and microwave polymerizing techniques

Dental Journal (Majalah Kedokteran Gigi) · Vol. 40 No. 1 (2007) · hlm. 6–10

DOI
10.20473/j.djmkg.v40.i1.p6-10
ISSN
2442-9740, 1978-3728
Terbit
2007-03-01
Penerbit
Faculty of Dental Medicine, Universitas Airlangga https://fkg.unair.ac.id/en
Bahasa
eng

Abstrak

The purpose of this study was to measure and compare two different polymerizing processes, heat polymerizing (HP) and microwave polymerizing (MP), on the three dimensional changes in the fitting surface and artificial teeth of maxillary complete dentures. A threedimensional coordinate measurement system was used to record distortion of the specimens. The distortion of the fitting surface was measured from the reference plane on the fitting side from which a coordinate system was set, and the movement of the artificial teeth and the distortion of the polished surface was measured from the reference plane of the artificial tooth side, from which a coordinate system was set. It was clearly showed that various distortions of denture specimens after polymerization process can be measured with this three-coordinate measuring machine. The study showed that the overall distortion of the fitting surface in HP specimens was shown to be larger than in MP ones.

Kata kunci

Jaringan kolaborasi para penulis

15 penulis · 51 tautan kepenulisan bersama · 33 lintas organisasi

Arahkan kursor atau ketuk sebuah nama untuk menyorot rekan penulisnya. Klik dua kali untuk membuka halaman penulis.

  • Hiroshima University
  • Institut Teknologi Sepuluh Nopember
  • Hiroshima University Hospital
  • Universitas Airlangga
  • Matsumoto Dental University
  • Organisasi berbeda
  • Organisasi sama
  • Afiliasi tidak diketahui
  • Garis lebih tebal = lebih banyak artikel bersama · lingkaran lebih besar = lebih banyak artikel
Tampilkan sebagai tabel
Rekan penulisOrganisasiArtikel bersama
Guang HongHiroshima University6
Makoto KawamuraHiroshima University6
Nobuyuki NakaiHiroshima University Hospital3
Nakai NakaiHiroshima University3
Agus Zainal ArifinInstitut Teknologi Sepuluh Nopember1
Anny YuniartiInstitut Teknologi Sepuluh Nopember1
Hudan StudiawanInstitut Teknologi Sepuluh Nopember1
Lutfiani Ratna DewiInstitut Teknologi Sepuluh Nopember1
Akira AsanoHiroshima University1
Akira TaguchiMatsumoto Dental University1
Takashi NakamotoHiroshima University Hospital1

Afiliasi berasal dari OpenAlex; metadata OAI-PMH jurnal tidak memuatnya. Penulis tanpa ID OpenAlex dicocokkan berdasarkan nama, sehingga dua orang bisa tergabung atau satu orang bisa terpisah.

Sumber metadata: OAI-PMH (metadata jurnal) https://e-journal.unair.ac.id/MKG/oai, pertama di-harvest 8 Nov 2026, terakhir terlihat 8 Nov 2026.
Metadata asli (oai_dc)
<oai_dc:dc xmlns="http://www.openarchives.org/OAI/2.0/" xmlns:dc="http://purl.org/dc/elements/1.1/" xmlns:oai_dc="http://www.openarchives.org/OAI/2.0/oai_dc/" xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance" xsi:schemaLocation="http://www.openarchives.org/OAI/2.0/oai_dc/  http://www.openarchives.org/OAI/2.0/oai_dc.xsd">
	<dc:title xml:lang="en-US">A comparison of three dimensional change in maxillary complete dentures between conventional heat polymerizing and microwave polymerizing techniques</dc:title>
	<dc:creator>Sadamori, Shinsuke</dc:creator>
	<dc:creator>Ishii, Toshiya</dc:creator>
	<dc:creator>Hamada, Taizo</dc:creator>
	<dc:creator>Razak, Arifzan</dc:creator>
	<dc:subject xml:lang="en-US">Maxillary complete denture</dc:subject>
	<dc:subject xml:lang="en-US">Three dimensional change</dc:subject>
	<dc:subject xml:lang="en-US">Microwave polymerizing</dc:subject>
	<dc:description xml:lang="en-US">The purpose of this study was to measure and compare two different polymerizing processes, heat polymerizing (HP) and microwave polymerizing (MP), on the three dimensional changes in the fitting surface and artificial teeth of maxillary complete dentures. A threedimensional coordinate measurement system was used to record distortion of the specimens. The distortion of the fitting surface was measured from the reference plane on the fitting side from which a coordinate system was set, and the movement of the artificial teeth and the distortion of the polished surface was measured from the reference plane of the artificial tooth side, from which a coordinate system was set. It was clearly showed that various distortions of denture specimens after polymerization process can be measured with this three-coordinate measuring machine. The study showed that the overall distortion of the fitting surface in HP specimens was shown to be larger than in MP ones.</dc:description>
	<dc:publisher xml:lang="en-US">Faculty of Dental Medicine, Universitas Airlangga https://fkg.unair.ac.id/en</dc:publisher>
	<dc:date>2007-03-01</dc:date>
	<dc:type>info:eu-repo/semantics/article</dc:type>
	<dc:type>info:eu-repo/semantics/publishedVersion</dc:type>
	<dc:type xml:lang="en-US">Peer-reviewed Article</dc:type>
	<dc:format>application/pdf</dc:format>
	<dc:identifier>https://e-journal.unair.ac.id/MKG/article/view/1064</dc:identifier>
	<dc:identifier>10.20473/j.djmkg.v40.i1.p6-10</dc:identifier>
	<dc:source xml:lang="en-US">Dental Journal (Majalah Kedokteran Gigi); Vol. 40 No. 1 (2007): March 2007; 6-10</dc:source>
	<dc:source>2442-9740</dc:source>
	<dc:source>1978-3728</dc:source>
	<dc:language>eng</dc:language>
	<dc:relation>https://e-journal.unair.ac.id/MKG/article/view/1064/847</dc:relation>
	<dc:rights xml:lang="en-US">Copyright (c) 2015 Dental Journal (Majalah Kedokteran Gigi)</dc:rights>
</oai_dc:dc>