Melola Discovery

← Melola Discovery

Jurnal SINTA 1

The difference in microleakage levels of nanohybrid composite resin using eighth-generation ethanol and isopropanol solvent bonding materials under moist and dry conditions (in vitro study)

Dental Journal (Majalah Kedokteran Gigi) · Vol. 52 No. 1 (2019) · hlm. 41–44

DOI
10.20473/j.djmkg.v52.i1.p41-44
ISSN
2442-9740, 1978-3728
Terbit
2019-03-31
Penerbit
Faculty of Dental Medicine, Universitas Airlangga https://fkg.unair.ac.id/en
Bahasa
eng

Abstrak

Background: Microleakage during restoration causes secondary caries. The shrinkage of nanohybrid composite resin can occur during the polymerization process, affected by both the selection of bonding materials featuring different solvents, such as ethanol and isopropanol, as well as contrasting conditions such as moist and dry. Purpose: This study aimed to determine and analyze the differences of microleakage level of nanohybrid composite resin using the eighth-generation bonding materials made from ethanol and isopropanol solvents under moist and dry conditions. Methods: This research constituted an experimental laboratory study. The samples were divided into four groups. Group I used a bonding material produced from ethanol under dry conditions. Group II used a bonding material produced from ethanol under moist conditions. Group III used a bonding material produced from isopropanol under dry conditions. Group IV used a bonding material produced from isopropanol under moist conditions. The levels of microleakage were subsequently tested using a stereo microscope. Results: Microleakage examination was performed by means of a stereo microscope to observe the methylene blue color penetration with assessment subsequently being performed on a scale of 0 to 3. The statistical results of a Kruskal-Wallis test showed that no significant differences occurred in any of the treatment groups (sig = 0.141, p<0.05). Conclusion: There was no difference in the microleakage levels of nanohybrid composite resin using eighth-generation bonding materials produced from ethanol and isopropanol solvents under moist and dry conditions.

Kata kunci

Jaringan kolaborasi para penulis

19 penulis · 49 tautan kepenulisan bersama · 15 lintas organisasi

Arahkan kursor atau ketuk sebuah nama untuk menyorot rekan penulisnya. Klik dua kali untuk membuka halaman penulis.

  • Jenderal Soedirman University
  • Universitas Airlangga
  • Sultan Agung Islamic University
  • University of Malaya
  • Afiliasi tidak diketahui
  • Organisasi berbeda
  • Organisasi sama
  • Afiliasi tidak diketahui
  • Garis lebih tebal = lebih banyak artikel bersama · lingkaran lebih besar = lebih banyak artikel
Tampilkan sebagai tabel
Rekan penulisOrganisasiArtikel bersama
Rinawati SatrioJenderal Soedirman University2
Muthiary Nitzschia Nur Iswary WinantoJenderal Soedirman University2
Aris Aji KurniawanJenderal Soedirman University2
Sri KunartiUniversitas Airlangga1
Ruslan EffendyUniversitas Airlangga1
Brelian Elok SeptyariniJenderal Soedirman University1
Dian Noviyanti Agus ImamJenderal Soedirman University1
Taufan BramantoroUniversitas Airlangga1
Rikko HudyonoJenderal Soedirman University1
Benni BenyaminSultan Agung Islamic University1
Pratiwi SoesilowatiUniversitas Airlangga1
Aloysius Pantjanugraha HudyonoAfiliasi tidak diketahui1
Wahyuning Ratih IrmaliaAfiliasi tidak diketahui1
Nor Azlida Mohd NorUniversity of Malaya1
Indes Rosmalisa SuratnoJenderal Soedirman University1
Ryana Budi PurnamaJenderal Soedirman University1

Afiliasi berasal dari OpenAlex; metadata OAI-PMH jurnal tidak memuatnya. Penulis tanpa ID OpenAlex dicocokkan berdasarkan nama, sehingga dua orang bisa tergabung atau satu orang bisa terpisah.

Sumber metadata: OAI-PMH (metadata jurnal) https://e-journal.unair.ac.id/MKG/oai, pertama di-harvest 8 Nov 2026, terakhir terlihat 8 Nov 2026.
Metadata asli (oai_dc)
<oai_dc:dc xmlns="http://www.openarchives.org/OAI/2.0/" xmlns:dc="http://purl.org/dc/elements/1.1/" xmlns:oai_dc="http://www.openarchives.org/OAI/2.0/oai_dc/" xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance" xsi:schemaLocation="http://www.openarchives.org/OAI/2.0/oai_dc/  http://www.openarchives.org/OAI/2.0/oai_dc.xsd">
	<dc:title xml:lang="en-US">The difference in microleakage levels of nanohybrid composite resin using eighth-generation ethanol and isopropanol solvent bonding materials under moist and dry conditions (in vitro study)</dc:title>
	<dc:creator>Dwiandhono, Irfan</dc:creator>
	<dc:creator>Logamarta, Setiadi W.</dc:creator>
	<dc:creator>Dhanurdara, Taura</dc:creator>
	<dc:subject xml:lang="en-US">eighth-generation bonding</dc:subject>
	<dc:subject xml:lang="en-US">moist</dc:subject>
	<dc:subject xml:lang="en-US">dry</dc:subject>
	<dc:subject xml:lang="en-US">ethanol</dc:subject>
	<dc:subject xml:lang="en-US">isopropanol</dc:subject>
	<dc:description xml:lang="en-US">Background: Microleakage during restoration causes secondary caries. The shrinkage of nanohybrid composite resin can occur during the polymerization process, affected by both the selection of bonding materials featuring different solvents, such as ethanol and isopropanol, as well as contrasting conditions such as moist and dry. Purpose: This study aimed to determine and analyze the differences of microleakage level of nanohybrid composite resin using the eighth-generation bonding materials made from ethanol and isopropanol solvents under moist and dry conditions. Methods: This research constituted an experimental laboratory study. The samples were divided into four groups. Group I used a bonding material produced from ethanol under dry conditions. Group II used a bonding material produced from ethanol under moist conditions. Group III used a bonding material produced from isopropanol under dry conditions. Group IV used a bonding material produced from isopropanol under moist conditions. The levels of microleakage were subsequently tested using a stereo microscope. Results: Microleakage examination was performed by means of a stereo microscope to observe the methylene blue color penetration with assessment subsequently being performed on a scale of 0 to 3. The statistical results of a Kruskal-Wallis test showed that no significant differences occurred in any of the treatment groups (sig = 0.141, p&amp;lt;0.05). Conclusion: There was no difference in the microleakage levels of nanohybrid composite resin using eighth-generation bonding materials produced from ethanol and isopropanol solvents under moist and dry conditions.</dc:description>
	<dc:publisher xml:lang="en-US">Faculty of Dental Medicine, Universitas Airlangga https://fkg.unair.ac.id/en</dc:publisher>
	<dc:date>2019-03-31</dc:date>
	<dc:type>info:eu-repo/semantics/article</dc:type>
	<dc:type>info:eu-repo/semantics/publishedVersion</dc:type>
	<dc:type xml:lang="en-US">Peer-reviewed Article</dc:type>
	<dc:format>application/pdf</dc:format>
	<dc:identifier>https://e-journal.unair.ac.id/MKG/article/view/12654</dc:identifier>
	<dc:identifier>10.20473/j.djmkg.v52.i1.p41-44</dc:identifier>
	<dc:source xml:lang="en-US">Dental Journal (Majalah Kedokteran Gigi); Vol. 52 No. 1 (2019): March 2019; 41-44</dc:source>
	<dc:source>2442-9740</dc:source>
	<dc:source>1978-3728</dc:source>
	<dc:language>eng</dc:language>
	<dc:relation>https://e-journal.unair.ac.id/MKG/article/view/12654/8198</dc:relation>
	<dc:rights xml:lang="en-US">Copyright (c) 2019 Dental Journal (Majalah Kedokteran Gigi)</dc:rights>
</oai_dc:dc>