Melola Discovery

← Melola Discovery

Jurnal SINTA 1

Effects of manufacturing methods of abalone gel as a desensitisation material on the closing of dentinal tubules

Dental Journal (Majalah Kedokteran Gigi) · Vol. 53 No. 2 (2020) · hlm. 99–106

DOI
10.20473/j.djmkg.v53.i2.p99-106
ISSN
2442-9740, 1978-3728
Terbit
2020-06-30
Penerbit
Faculty of Dental Medicine, Universitas Airlangga https://fkg.unair.ac.id/en
Bahasa
eng

Abstrak

Background: Abalone (Haliotis varia Linnaeus) shells possess a high arginine content and are expected to be an alternative desensitisation material that is both insoluble and able to properly close dentinal tubules. Different methods of manufacturing abalone gel affect the molecular weight, hydrophilic or hydrophobic properties and protein content of the lysis. Purpose: This study aimed to determine the effects of different manufacturing methods on the dentinal tubule closure of abalone desensitisation gel. Methods: This study involved the extraction of abalone shells followed by preparative and thin-layer chromatography. The drying of the samples was carried out by the precipitation, drying, and addition methods. The research was divided into eight treatment groups, each consisting of three samples (F1, F2, F3). Each sample was applied to two study subjects' post-extracted third molars, which were cut into disc shapes and subsequently etched with 6% citric acid. The percentage of dentinal tubule occlusion was calculated by Image J (NIH, USA) software. Data were analysed using three-way ANOVA. Results: The results showed that there were significant differences (p 0.05) in terms of the interactions of the samples' three manufacturing methods. Conclusion: The manufacture of abalone gel as a desensitisation material requires a minimum of two interactions between the sample-making method and the addition, deposition, and drying methods. The best method was deposition.

Kata kunci

Jaringan kolaborasi para penulis

40 penulis · 104 tautan kepenulisan bersama · 18 lintas organisasi · menampilkan 40 yang paling banyak terhubung

Arahkan kursor atau ketuk sebuah nama untuk menyorot rekan penulisnya. Klik dua kali untuk membuka halaman penulis.

  • Universitas Gadjah Mada
  • National Research and Innovation Agency
  • Sebelas Maret University
  • Universitas Muhammadiyah Semarang
  • IPB University
  • University of Palangka Raya
  • Udayana University
  • Organisasi lain
  • Afiliasi tidak diketahui
  • Organisasi berbeda
  • Organisasi sama
  • Afiliasi tidak diketahui
  • Garis lebih tebal = lebih banyak artikel bersama · lingkaran lebih besar = lebih banyak artikel
Tampilkan sebagai tabel
Rekan penulisOrganisasiArtikel bersama
Widya AsmaraUniversitas Gadjah Mada5
Dyah IrnawatiUniversitas Gadjah Mada4
Dwi PriyowidodoUniversitas Gadjah Mada2
Tjut Sugandawaty DjohanUniversitas Gadjah Mada2
Juni HandajaniUniversitas Gadjah Mada2
Ema MulyawatiUniversitas Gadjah Mada2
Widowati SiswomihardjoUniversitas Gadjah Mada2
Nuryono NuryonoUniversitas Gadjah Mada2
Didik Tulus SubektiNational Research and Innovation Agency2
Jarot SubandonoSebelas Maret University2
Sri DarmawatiUniversitas Muhammadiyah Semarang2
Langkah SembiringUniversitas Gadjah Mada2
Widodo WidodoIPB University1
Lies Mira YusiatiUniversitas Gadjah Mada1
Asih KurniawatiUniversitas Gadjah Mada1
Adventus PandaUniversity of Palangka Raya1
Ari MeididitAfiliasi tidak diketahui1
Okta SimonAfiliasi tidak diketahui1
Niswati Fathmah RosyidaUniversitas Gadjah Mada1
Pinandi Sri PudyaniUniversitas Gadjah Mada1
Marsetyawan H. N. E. SoesatyoUniversitas Gadjah Mada1
Archadian NuryantiUniversitas Gadjah Mada1
Dewi AgustinaUniversitas Gadjah Mada1
Yulita KristantiUniversitas Gadjah Mada1
Marsetyawan HnesUniversitas Gadjah Mada1
Alizatul Khairani HasanUniversitas Gadjah Mada1
Sri Kavi SubramaniamUniversitas Gadjah Mada1
Tunjung NugraheniUniversitas Gadjah Mada1
Dyah Anindya WidyasriniUniversitas Gadjah Mada1
HarsiniUniversitas Gadjah Mada1
WidjijonoUniversitas Gadjah Mada1
Mohammad Imanuddin YasnawiUniversitas Gadjah Mada1
Dhea Maurilla VeraniUniversitas Gadjah Mada1
Ni Nyoman Ayu DewiUdayana University1
Erma SulistyaningsihUniversitas Jember1

Afiliasi berasal dari OpenAlex; metadata OAI-PMH jurnal tidak memuatnya. Penulis tanpa ID OpenAlex dicocokkan berdasarkan nama, sehingga dua orang bisa tergabung atau satu orang bisa terpisah.

Sumber metadata: OAI-PMH (metadata jurnal) https://e-journal.unair.ac.id/MKG/oai, pertama di-harvest 8 Nov 2026, terakhir terlihat 8 Nov 2026.
Metadata asli (oai_dc)
<oai_dc:dc xmlns="http://www.openarchives.org/OAI/2.0/" xmlns:dc="http://purl.org/dc/elements/1.1/" xmlns:oai_dc="http://www.openarchives.org/OAI/2.0/oai_dc/" xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance" xsi:schemaLocation="http://www.openarchives.org/OAI/2.0/oai_dc/  http://www.openarchives.org/OAI/2.0/oai_dc.xsd">
	<dc:title xml:lang="en-US">Effects of manufacturing methods of abalone gel as a desensitisation material on the closing of dentinal tubules</dc:title>
	<dc:creator>Barunawati, Sri Budi</dc:creator>
	<dc:creator>Artama, Wayan Tunas</dc:creator>
	<dc:creator>Saleh, Suparyono</dc:creator>
	<dc:creator>Sunarintyas, Siti</dc:creator>
	<dc:creator>Murti, Yosi Bayu</dc:creator>
	<dc:subject xml:lang="en-US">abalone gel</dc:subject>
	<dc:subject xml:lang="en-US">arginine</dc:subject>
	<dc:subject xml:lang="en-US">hypersensitivity dentin</dc:subject>
	<dc:subject xml:lang="en-US">tubule occlusion</dc:subject>
	<dc:description xml:lang="en-US">Background: Abalone (Haliotis varia Linnaeus) shells possess a high arginine content and are expected to be an alternative desensitisation material that is both insoluble and able to properly close dentinal tubules. Different methods of manufacturing abalone gel affect the molecular weight, hydrophilic or hydrophobic properties and protein content of the lysis. Purpose: This study aimed to determine the effects of different manufacturing methods on the dentinal tubule closure of abalone desensitisation gel. Methods: This study involved the extraction of abalone shells followed by preparative and thin-layer chromatography. The drying of the samples was carried out by the precipitation, drying, and addition methods. The research was divided into eight treatment groups, each consisting of three samples (F1, F2, F3). Each sample was applied to two study subjects' post-extracted third molars, which were cut into disc shapes and subsequently etched with 6% citric acid. The percentage of dentinal tubule occlusion was calculated by Image J (NIH, USA) software. Data were analysed using three-way ANOVA. Results: The results showed that there were significant differences (p &amp;lt; 0.05) both in terms of the effects of the samples with deposition and addition on the occlusion of the dentinal tubules and in terms of the interactions between the samples with drying and addition. There was no significant difference (p &amp;gt; 0.05) in terms of the interactions of the samples' three manufacturing methods. Conclusion: The manufacture of abalone gel as a desensitisation material requires a minimum of two interactions between the sample-making method and the addition, deposition, and drying methods. The best method was deposition.</dc:description>
	<dc:publisher xml:lang="en-US">Faculty of Dental Medicine, Universitas Airlangga https://fkg.unair.ac.id/en</dc:publisher>
	<dc:date>2020-06-30</dc:date>
	<dc:type>info:eu-repo/semantics/article</dc:type>
	<dc:type>info:eu-repo/semantics/publishedVersion</dc:type>
	<dc:type xml:lang="en-US">Peer-reviewed Article</dc:type>
	<dc:format>application/pdf</dc:format>
	<dc:identifier>https://e-journal.unair.ac.id/MKG/article/view/19090</dc:identifier>
	<dc:identifier>10.20473/j.djmkg.v53.i2.p99-106</dc:identifier>
	<dc:source xml:lang="en-US">Dental Journal (Majalah Kedokteran Gigi); Vol. 53 No. 2 (2020): June 2020; 99-106</dc:source>
	<dc:source>2442-9740</dc:source>
	<dc:source>1978-3728</dc:source>
	<dc:language>eng</dc:language>
	<dc:relation>https://e-journal.unair.ac.id/MKG/article/view/19090/11251</dc:relation>
	<dc:rights xml:lang="en-US">Copyright (c) 2020 Dental Journal (Majalah Kedokteran Gigi)</dc:rights>
</oai_dc:dc>