Melola Discovery

← Melola Discovery

Akses terbuka Jurnal SINTA 1

The effect of giomer's preheating on fluoride release

Dental Journal (Majalah Kedokteran Gigi) · Vol. 55 No. 4 (2022) · hlm. 226–230

DOI
10.20473/j.djmkg.v55.i4.p226-230
ISSN
2442-9740, 1978-3728
Terbit
2022-10-13
Penerbit
Faculty of Dental Medicine, Universitas Airlangga https://fkg.unair.ac.id/en
Bahasa
eng
Lisensi
creativecommons.org/licenses/by-sa/4.0

Abstrak

Background: Secondary caries occur due to imperfect plaque control. Prolong the protective and therapeutic effects can be done with restorative materials that release fluoride. Now composite resins have been developed a new restorative hybrid material with new matrix component, namely giomer. Giomer composition containing surface pre reacted glass ionomer (S-PRG) as a major source of fluoride production. Increasing the mechanical strength and minimize microleakage to prevent secondary caries can be done with preheating treatment. Purpose: This study is conducted to determine the effect of preheating temperature on the release of giomer's fluoride. Methods: This study used 9 cylindrical samples in 10 mm diameter and 2 mm thickness each group, divided into 3 groups and 3 subgroups. Group 1: preheating at 37°C for 30 minutes. Group 2: preheating at 60°C for 30 minutes. Group 3: as a control group (without preheating treatment). Each group divided into 3 subgroups immersion, on day 1, day 7 and day 14 with artificial saliva. Fluoride release test was conducted by Spectrophotometer. IBM's SPSS Statistics used for the Data analysis. Results: The addition of preheating treatment decrease the amount of fluoride release. One-way ANOVA test showed a significant difference (P < 0.05). A significant difference between groups and sub groups showed in LSD test (P < 0.05). Conclusion: The group without preheating treatment has highest fluoride release and the 60°C preheating treatment group was the lowest. Addition of preheating treatment may increase the mechanical strength and minimize microleakage, but also descrease the amount of fluoride release.

Kata kunci

Jaringan kolaborasi para penulis

21 penulis · 52 tautan kepenulisan bersama · 15 lintas organisasi

Arahkan kursor atau ketuk sebuah nama untuk menyorot rekan penulisnya. Klik dua kali untuk membuka halaman penulis.

  • Jenderal Soedirman University
  • Universitas Airlangga
  • Sultan Agung Islamic University
  • University of Malaya
  • Afiliasi tidak diketahui
  • Organisasi berbeda
  • Organisasi sama
  • Afiliasi tidak diketahui
  • Garis lebih tebal = lebih banyak artikel bersama · lingkaran lebih besar = lebih banyak artikel
Tampilkan sebagai tabel
Rekan penulisOrganisasiArtikel bersama
Taura DhanurdaraJenderal Soedirman University2
Dody NovrialJenderal Soedirman University1
Laksmita TanjungAfiliasi tidak diketahui1
Sri KunartiUniversitas Airlangga1
Ruslan EffendyUniversitas Airlangga1
Brelian Elok SeptyariniJenderal Soedirman University1
Dian Noviyanti Agus ImamJenderal Soedirman University1
Taufan BramantoroUniversitas Airlangga1
Rikko HudyonoJenderal Soedirman University1
Benni BenyaminSultan Agung Islamic University1
Pratiwi SoesilowatiUniversitas Airlangga1
Aloysius Pantjanugraha HudyonoAfiliasi tidak diketahui1
Wahyuning Ratih IrmaliaAfiliasi tidak diketahui1
Nor Azlida Mohd NorUniversity of Malaya1
Indes Rosmalisa SuratnoJenderal Soedirman University1
Ryana Budi PurnamaJenderal Soedirman University1

Afiliasi berasal dari OpenAlex; metadata OAI-PMH jurnal tidak memuatnya. Penulis tanpa ID OpenAlex dicocokkan berdasarkan nama, sehingga dua orang bisa tergabung atau satu orang bisa terpisah.

Sumber metadata: OAI-PMH (metadata jurnal) https://e-journal.unair.ac.id/MKG/oai, pertama di-harvest 8 Nov 2026, terakhir terlihat 8 Nov 2026.
Metadata asli (oai_dc)
<oai_dc:dc xmlns="http://www.openarchives.org/OAI/2.0/" xmlns:dc="http://purl.org/dc/elements/1.1/" xmlns:oai_dc="http://www.openarchives.org/OAI/2.0/oai_dc/" xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance" xsi:schemaLocation="http://www.openarchives.org/OAI/2.0/oai_dc/  http://www.openarchives.org/OAI/2.0/oai_dc.xsd">
	<dc:title xml:lang="en-US">The effect of giomer's preheating on fluoride release</dc:title>
	<dc:creator>Winanto, Muthiary Nitzschia Nur Iswary</dc:creator>
	<dc:creator>Dwiandhono, Irfan</dc:creator>
	<dc:creator>Logamarta, Setiadi Warata</dc:creator>
	<dc:creator>Satrio, Rinawati</dc:creator>
	<dc:creator>Kurniawan, Aris Aji</dc:creator>
	<dc:subject xml:lang="en-US">fluoride release</dc:subject>
	<dc:subject xml:lang="en-US">giomer</dc:subject>
	<dc:subject xml:lang="en-US">preheating</dc:subject>
	<dc:description xml:lang="en-US">Background: Secondary caries occur due to imperfect plaque control. Prolong the protective and therapeutic effects can be done with restorative materials that release fluoride. Now composite resins have been developed a new restorative hybrid material with new matrix component, namely giomer. Giomer composition containing surface pre reacted glass ionomer (S-PRG) as a major source of fluoride production. Increasing the mechanical strength and minimize microleakage to prevent secondary caries can be done with preheating treatment. Purpose: This study is conducted to determine the effect of preheating temperature on the release of giomer's fluoride. Methods: This study used 9 cylindrical samples in 10 mm diameter and 2 mm thickness each group, divided into 3 groups and 3 subgroups. Group 1: preheating at 37°C for 30 minutes. Group 2: preheating at 60°C for 30 minutes. Group 3: as a control group (without preheating treatment). Each group divided into 3 subgroups immersion, on day 1, day 7 and day 14 with artificial saliva. Fluoride release test was conducted by Spectrophotometer. IBM's SPSS Statistics used for the Data analysis. Results: The addition of preheating treatment decrease the amount of fluoride release. One-way ANOVA test showed a significant difference (P &amp;lt; 0.05). A significant difference between groups and sub groups showed in LSD test (P &amp;lt; 0.05). Conclusion: The group without preheating treatment has highest fluoride release and the 60°C preheating treatment group was the lowest. Addition of preheating treatment may increase the mechanical strength and minimize microleakage, but also descrease the amount of fluoride release. </dc:description>
	<dc:publisher xml:lang="en-US">Faculty of Dental Medicine, Universitas Airlangga https://fkg.unair.ac.id/en</dc:publisher>
	<dc:date>2022-10-13</dc:date>
	<dc:type>info:eu-repo/semantics/article</dc:type>
	<dc:type>info:eu-repo/semantics/publishedVersion</dc:type>
	<dc:format>text/xml</dc:format>
	<dc:format>application/pdf</dc:format>
	<dc:identifier>https://e-journal.unair.ac.id/MKG/article/view/33808</dc:identifier>
	<dc:identifier>10.20473/j.djmkg.v55.i4.p226-230</dc:identifier>
	<dc:source xml:lang="en-US">Dental Journal (Majalah Kedokteran Gigi); Vol. 55 No. 4 (2022): December 2022; 226-230</dc:source>
	<dc:source>2442-9740</dc:source>
	<dc:source>1978-3728</dc:source>
	<dc:language>eng</dc:language>
	<dc:relation>https://e-journal.unair.ac.id/MKG/article/view/33808/39949</dc:relation>
	<dc:relation>https://e-journal.unair.ac.id/MKG/article/view/33808/22678</dc:relation>
	<dc:rights xml:lang="en-US">Copyright (c) 2022 Dental Journal (Majalah Kedokteran Gigi)</dc:rights>
	<dc:rights xml:lang="en-US">https://creativecommons.org/licenses/by-sa/4.0</dc:rights>
</oai_dc:dc>