Melola Discovery

← Melola Discovery

Akses terbuka Jurnal SINTA 1

A novel approach for posterior bite collapse in an adult with crossbite anterior using a 3D-printed bite riser

Dental Journal (Majalah Kedokteran Gigi) · Vol. 57 No. 4 (2024) · hlm. 292–297

DOI
10.20473/j.djmkg.v57.i4.p292-297
ISSN
2442-9740, 1978-3728
Terbit
2024-09-03
Penerbit
Faculty of Dental Medicine, Universitas Airlangga https://fkg.unair.ac.id/en
Bahasa
eng
Lisensi
creativecommons.org/licenses/by-sa/4.0

Abstrak

Background: Managing an adult patient presenting with an anterior crossbite in conjunction with posterior bite collapse (PBC) is a difficult challenge. Purpose: The purpose of this case study is to highlight the accuracy that can be attained with the utilization of a three-dimensional (3D) printed bite riser in the correction of PBC accompanied by an anterior crossbite in an adult patient with Class III malocclusion. Case: A 64-year-old male complained of being unable to chew properly. Extraoral examination revealed a concave profile with a protrusive mandible. The patient exhibits a 5 mm anterior crossbite and has missing lower posterior molars, resulting in bilateral PBC. The cephalometric analysis revealed skeletal Class III patterns (SNA: 82.19o; SNB: 86.34o; ANB: -4.15°), with protrusion and counterclockwise rotation of the mandible (SN-OP: 3.84o). Case Management: By utilizing a 3D-printed bite riser in conjunction with temporary anchoring devices (TADs), it is possible to resolve the issue of an anterior crossbite accompanied by PBC. This is achieved by repositioning the elongated posterior segments on both sides of the maxilla to generate vertical space for mandibular tooth rehabilitation, retracting the anterior segment, and narrowing the lower arch. Simultaneously, the crossbite on both sides was corrected, a Class I and ideal overbite and overjet were achieved, the occlusal vertical dimension increased, the occlusal plane angle was corrected (7.51o), and an acceptable ANB angle (-1.36°) was accomplished. The treatment lasted 18 months and yielded sustained results after a one-year retention period. Conclusion: Integrating 3D printing technology in orthodontic treatment offers numerous options for managing challenging cases such as PBC while also reducing the treatment length. The patient was satisfied with the results achieved.

Kata kunci

Jaringan kolaborasi para penulis

32 penulis · 109 tautan kepenulisan bersama · 59 lintas organisasi

Arahkan kursor atau ketuk sebuah nama untuk menyorot rekan penulisnya. Klik dua kali untuk membuka halaman penulis.

  • Universitas Gadjah Mada
  • Universitas Airlangga
  • Universitas Sumatera Utara
  • Zahnklinik Bochum
  • Universidade de Santiago de Compostela
  • University Medical Center Groningen
  • University of Indonesia
  • Organisasi lain
  • Afiliasi tidak diketahui
  • Organisasi berbeda
  • Organisasi sama
  • Afiliasi tidak diketahui
  • Garis lebih tebal = lebih banyak artikel bersama · lingkaran lebih besar = lebih banyak artikel
Tampilkan sebagai tabel
Rekan penulisOrganisasiArtikel bersama
Sri SuparwitriUniversitas Gadjah Mada3
Pinandi Sri PudyaniUniversitas Gadjah Mada3
Eufrasia Claudia PutriUniversitas Gadjah Mada3
Abdullah Md TajudinAfiliasi tidak diketahui3
Cendrawasih Andusyana FarmasyantiUniversitas Gadjah Mada2
Komang Abhigamika WijayadharmaUniversitas Gadjah Mada2
Lina LestiaUniversitas Gadjah Mada2
ChristnawatiUniversitas Gadjah Mada2
Diatri Nari RatihUniversitas Gadjah Mada2
Ryza YashaUniversitas Gadjah Mada2
Sarah Fitria RomadhoniUniversitas Gadjah Mada2
Hasna Syifa YunivaUniversitas Gadjah Mada2
Siti SunarintyasUniversitas Gadjah Mada1
Fitria AvriliyantiUniversitas Gadjah Mada1
Astriana NurfitrahUniversitas Gadjah Mada1
Christnawati ChristnawatiUniversitas Gadjah Mada1
Retno IswatiUniversitas Gadjah Mada1
Aulia AyubUniversitas Gadjah Mada1
Anne Marie Kuijpers‐JagtmanUniversity Medical Center Groningen1
Prana Ugiana GioUniversitas Sumatera Utara1
Endah MardiatiPadjadjaran University1
Haryono UtomoUniversitas Airlangga1
Ida Bagus NarmadaUniversitas Airlangga1
Ervina SofyantiUniversitas Sumatera Utara1
Maria PurbiatiUniversity of Indonesia1
Anand MaryaUniversity of Puthisastra1

Afiliasi berasal dari OpenAlex; metadata OAI-PMH jurnal tidak memuatnya. Penulis tanpa ID OpenAlex dicocokkan berdasarkan nama, sehingga dua orang bisa tergabung atau satu orang bisa terpisah.

Sumber metadata: OAI-PMH (metadata jurnal) https://e-journal.unair.ac.id/MKG/oai, pertama di-harvest 8 Nov 2026, terakhir terlihat 8 Nov 2026.
Metadata asli (oai_dc)
<oai_dc:dc xmlns="http://www.openarchives.org/OAI/2.0/" xmlns:dc="http://purl.org/dc/elements/1.1/" xmlns:oai_dc="http://www.openarchives.org/OAI/2.0/oai_dc/" xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance" xsi:schemaLocation="http://www.openarchives.org/OAI/2.0/oai_dc/  http://www.openarchives.org/OAI/2.0/oai_dc.xsd">
	<dc:title xml:lang="en-US">A novel approach for posterior bite collapse in an adult with crossbite anterior using a 3D-printed bite riser</dc:title>
	<dc:creator>Alhasyimi, Ananto Ali</dc:creator>
	<dc:creator>Indra, Putu </dc:creator>
	<dc:creator>Rosyida, Niswati Fathmah</dc:creator>
	<dc:creator>Retnaningrum, Yanuarti</dc:creator>
	<dc:creator>Setijanto, R. Darmawan</dc:creator>
	<dc:creator>Vázquez-Santos, Francisco José </dc:creator>
	<dc:subject xml:lang="en-US">3D-printed bite riser</dc:subject>
	<dc:subject xml:lang="en-US">adult</dc:subject>
	<dc:subject xml:lang="en-US">crossbite anterior</dc:subject>
	<dc:subject xml:lang="en-US">orthodontics</dc:subject>
	<dc:subject xml:lang="en-US">posterior bite collapse</dc:subject>
	<dc:description xml:lang="en-US">Background: Managing an adult patient presenting with an anterior crossbite in conjunction with posterior bite collapse (PBC) is a difficult challenge. Purpose: The purpose of this case study is to highlight the accuracy that can be attained with the utilization of a three-dimensional (3D) printed bite riser in the correction of PBC accompanied by an anterior crossbite in an adult patient with Class III malocclusion. Case: A 64-year-old male complained of being unable to chew properly. Extraoral examination revealed a concave profile with a protrusive mandible. The patient exhibits a 5 mm anterior crossbite and has missing lower posterior molars, resulting in bilateral PBC. The cephalometric analysis revealed skeletal Class III patterns (SNA: 82.19o; SNB: 86.34o; ANB: -4.15°), with protrusion and counterclockwise rotation of the mandible (SN-OP: 3.84o). Case Management: By utilizing a 3D-printed bite riser in conjunction with temporary anchoring devices (TADs), it is possible to resolve the issue of an anterior crossbite accompanied by PBC. This is achieved by repositioning the elongated posterior segments on both sides of the maxilla to generate vertical space for mandibular tooth rehabilitation, retracting the anterior segment, and narrowing the lower arch. Simultaneously, the crossbite on both sides was corrected, a Class I and ideal overbite and overjet were achieved, the occlusal vertical dimension increased, the occlusal plane angle was corrected (7.51o), and an acceptable ANB angle (-1.36°) was accomplished. The treatment lasted 18 months and yielded sustained results after a one-year retention period. Conclusion: Integrating 3D printing technology in orthodontic treatment offers numerous options for managing challenging cases such as PBC while also reducing the treatment length. The patient was satisfied with the results achieved.</dc:description>
	<dc:publisher xml:lang="en-US">Faculty of Dental Medicine, Universitas Airlangga https://fkg.unair.ac.id/en</dc:publisher>
	<dc:date>2024-09-03</dc:date>
	<dc:type>info:eu-repo/semantics/article</dc:type>
	<dc:type>info:eu-repo/semantics/publishedVersion</dc:type>
	<dc:format>text/xml</dc:format>
	<dc:format>application/pdf</dc:format>
	<dc:identifier>https://e-journal.unair.ac.id/MKG/article/view/51483</dc:identifier>
	<dc:identifier>10.20473/j.djmkg.v57.i4.p292-297</dc:identifier>
	<dc:source xml:lang="en-US">Dental Journal (Majalah Kedokteran Gigi); Vol. 57 No. 4 (2024): December; 292-297</dc:source>
	<dc:source>2442-9740</dc:source>
	<dc:source>1978-3728</dc:source>
	<dc:language>eng</dc:language>
	<dc:relation>https://e-journal.unair.ac.id/MKG/article/view/51483/31159</dc:relation>
	<dc:relation>https://e-journal.unair.ac.id/MKG/article/view/51483/29681</dc:relation>
	<dc:rights xml:lang="en-US">Copyright (c) 2024 Dental Journal</dc:rights>
	<dc:rights xml:lang="en-US">https://creativecommons.org/licenses/by-sa/4.0</dc:rights>
</oai_dc:dc>