Melola Discovery

← Melola Discovery

Akses terbuka Jurnal SINTA 1

Lightweight mutual authentication protocol for resource-constrained radio frequency identification tags with PRINCE cipher

IAES International Journal of Artificial Intelligence · Vol. 14 No. 4 (2025) · hlm. 3435–3443

DOI
10.11591/ijai.v14.i4.pp3435-3443
ISSN
2252-8938, 2089-4872
Terbit
2025-08-01
Penerbit
Institute of Advanced Engineering and Science
Bahasa
eng
Lisensi
creativecommons.org/licenses/by-sa/4.0

Abstrak

Radio frequency identification (RFID) is a key technology for the internet of things (IoT), with widespread applications in the commercial, healthcare, enterprise, and community sectors. However, privacy and security concerns remain with RFID systems. This manuscript presents a novel RFID-based mutual authentication protocol (MAP) using the PRINCE cipher to address these concerns. The proposed MAP leverages a PRINCE cipher architecture capable of both encryption and decryption based on a mode signal. It performs five encryption and two decryption processes during tag and reader mutual authentication, with updated seed values ensuring synchronization and secure data communication. The PRINCE cipher implementation utilizes less than 1% of slices, operates at 226 MHz with a latency of 3.5 clock cycles (CC), and has a throughput of 4.125 Gbps. The complete RFID-based MAP consumes 721 mW of power, occupies 2% of the chip area, and achieves a latency of 35.5 CC and a throughput of 262 Mbps. This represents a 25% reduction in latency, a 40% increase in throughput, and a 30% decrease in execution time compared to existing MAP approaches. The findings demonstrate the potential of the proposed MAP to enhance latency, throughput, and execution time, offering a promising solution for secure and efficient RFID authentication.

Kata kunci

Jaringan kolaborasi para penulis

7 penulis · 11 tautan kepenulisan bersama · 1 lintas organisasi

Arahkan kursor atau ketuk sebuah nama untuk menyorot rekan penulisnya. Klik dua kali untuk membuka halaman penulis.

  • New Horizon College of Engineering
  • PES University
  • Afiliasi tidak diketahui
  • Organisasi berbeda
  • Organisasi sama
  • Afiliasi tidak diketahui
  • Garis lebih tebal = lebih banyak artikel bersama · lingkaran lebih besar = lebih banyak artikel
Tampilkan sebagai tabel
Rekan penulisOrganisasiArtikel bersama
Kanduri V. S. S. S. S.SairamAfiliasi tidak diketahui2
Madhavi MallamPES University1
Chaitra Soppinhalli NatarajuAfiliasi tidak diketahui1

Afiliasi berasal dari OpenAlex; metadata OAI-PMH jurnal tidak memuatnya. Penulis tanpa ID OpenAlex dicocokkan berdasarkan nama, sehingga dua orang bisa tergabung atau satu orang bisa terpisah.

Sumber metadata: OAI-PMH (metadata jurnal) http://ijai.iaescore.com/index.php/IJAI/oai, pertama di-harvest 8 Nov 2026, terakhir terlihat 8 Nov 2026.
Metadata asli (oai_dc)
<oai_dc:dc xmlns="http://www.openarchives.org/OAI/2.0/" xmlns:dc="http://purl.org/dc/elements/1.1/" xmlns:oai_dc="http://www.openarchives.org/OAI/2.0/oai_dc/" xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance" xsi:schemaLocation="http://www.openarchives.org/OAI/2.0/oai_dc/  http://www.openarchives.org/OAI/2.0/oai_dc.xsd">
	<dc:title xml:lang="en-US">Lightweight mutual authentication protocol for resource-constrained radio frequency identification tags with PRINCE cipher</dc:title>
	<dc:creator>Naik, Mahendra Shridhar</dc:creator>
	<dc:creator>Sreekantha, Desai Karanam</dc:creator>
	<dc:creator>Sairam, Kanduri V S S S S</dc:creator>
	<dc:creator>Nataraju, Chaitra Soppinahally</dc:creator>
	<dc:subject xml:lang="en-US">Cryptography</dc:subject>
	<dc:subject xml:lang="en-US">Cipher; Latency; Mutual authentication; PRINCE; Throughput</dc:subject>
	<dc:description xml:lang="en-US">Radio frequency identification (RFID) is a key technology for the internet of things (IoT), with widespread applications in the commercial, healthcare, enterprise, and community sectors. However, privacy and security concerns remain with RFID systems. This manuscript presents a novel RFID-based mutual authentication protocol (MAP) using the PRINCE cipher to address these concerns. The proposed MAP leverages a PRINCE cipher architecture capable of both encryption and decryption based on a mode signal. It performs five encryption and two decryption processes during tag and reader mutual authentication, with updated seed values ensuring synchronization and secure data communication. The PRINCE cipher implementation utilizes less than 1% of slices, operates at 226 MHz with a latency of 3.5 clock cycles (CC), and has a throughput of 4.125 Gbps. The complete RFID-based MAP consumes 721 mW of power, occupies 2% of the chip area, and achieves a latency of 35.5 CC and a throughput of 262 Mbps. This represents a 25% reduction in latency, a 40% increase in throughput, and a 30% decrease in execution time compared to existing MAP approaches. The findings demonstrate the potential of the proposed MAP to enhance latency, throughput, and execution time, offering a promising solution for secure and efficient RFID authentication.</dc:description>
	<dc:publisher xml:lang="en-US">Institute of Advanced Engineering and Science</dc:publisher>
	<dc:contributor xml:lang="en-US"></dc:contributor>
	<dc:date>2025-08-01</dc:date>
	<dc:type>info:eu-repo/semantics/article</dc:type>
	<dc:type>info:eu-repo/semantics/publishedVersion</dc:type>
	<dc:type xml:lang="en-US"></dc:type>
	<dc:format>application/pdf</dc:format>
	<dc:identifier>https://ijai.iaescore.com/index.php/IJAI/article/view/25346</dc:identifier>
	<dc:identifier>10.11591/ijai.v14.i4.pp3435-3443</dc:identifier>
	<dc:source xml:lang="en-US">IAES International Journal of Artificial Intelligence (IJ-AI); Vol 14, No 4: August 2025; 3435-3443</dc:source>
	<dc:source>2252-8938</dc:source>
	<dc:source>2089-4872</dc:source>
	<dc:source>10.11591/ijai.v14.i4</dc:source>
	<dc:language>eng</dc:language>
	<dc:relation>https://ijai.iaescore.com/index.php/IJAI/article/view/25346/14679</dc:relation>
	<dc:rights xml:lang="en-US">Copyright (c) 2025 Institute of Advanced Engineering and Science</dc:rights>
	<dc:rights xml:lang="en-US">http://creativecommons.org/licenses/by-sa/4.0</dc:rights>
</oai_dc:dc>