Melola Discovery

← Melola Discovery

Akses terbuka Jurnal SINTA 1

A Fuzzy Model for Ni-Cd Batteries

IAES International Journal of Artificial Intelligence · Vol. 2 No. 2 (2013) · hlm. 81–89

ISSN
2252-8938, 2089-4872
Terbit
2013-06-01
Penerbit
Institute of Advanced Engineering and Science
Bahasa
eng
Lisensi
creativecommons.org/licenses/by-sa/4.0

Abstrak

The batteries models found in the literature are based mainly on mathematical descriptions of physical, chemical, and electrochemical properties which are difficult to determine. This paper presents new fuzzy based model for Nickel Cadmium (Ni-Cd) batteries. The main advantage of the proposed models is that, the proposed model is able to predict battery output voltage without knowledge of numerous factors. Inputs of the proposed model are battery current and state of charge while battery voltage is selected as the output. To check the accuracy of the proposed models, simulations results are compared with the measured battery data at different charge current as well as many other battery models for a 7Ah, size F, Ni-Cd battery. Simulated shows good agreements with measured data. The advantage of fuzzy model is that for modeling by fuzzy method experimental data isn’t needed. The proposed models can apply for modeling of other batteries types.DOI: http://dx.doi.org/10.11591/ij-ai.v2i2.1784

Kata kunci

Jaringan kolaborasi para penulis

8 penulis · 8 tautan kepenulisan bersama

Arahkan kursor atau ketuk sebuah nama untuk menyorot rekan penulisnya. Klik dua kali untuk membuka halaman penulis.

  • Imam Khomeini International University
  • Afiliasi tidak diketahui
  • Organisasi berbeda
  • Organisasi sama
  • Afiliasi tidak diketahui
  • Garis lebih tebal = lebih banyak artikel bersama · lingkaran lebih besar = lebih banyak artikel
Tampilkan sebagai tabel
Rekan penulisOrganisasiArtikel bersama
Haniyeh MarefatjouImam Khomeini International University3
S. M. TorabiAfiliasi tidak diketahui1
Iman SoltaniImam Khomeini International University1
Hossein FaramarziImam Khomeini International University1
Majid KeshmiriAfiliasi tidak diketahui1
Majid SalimAfiliasi tidak diketahui1

Afiliasi berasal dari OpenAlex; metadata OAI-PMH jurnal tidak memuatnya. Penulis tanpa ID OpenAlex dicocokkan berdasarkan nama, sehingga dua orang bisa tergabung atau satu orang bisa terpisah.

Sumber metadata: OAI-PMH (metadata jurnal) http://ijai.iaescore.com/index.php/IJAI/oai, pertama di-harvest 8 Nov 2026, terakhir terlihat 16 Nov 2026.
Metadata asli (oai_dc)
<oai_dc:dc xmlns="http://www.openarchives.org/OAI/2.0/" xmlns:dc="http://purl.org/dc/elements/1.1/" xmlns:oai_dc="http://www.openarchives.org/OAI/2.0/oai_dc/" xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance" xsi:schemaLocation="http://www.openarchives.org/OAI/2.0/oai_dc/  http://www.openarchives.org/OAI/2.0/oai_dc.xsd">
	<dc:title xml:lang="en-US">A Fuzzy Model for Ni-Cd Batteries</dc:title>
	<dc:creator>Sarvi, Mohammad</dc:creator>
	<dc:creator>Safari, Masoud</dc:creator>
	<dc:subject xml:lang="en-US">Fuzzy Logic</dc:subject>
	<dc:subject xml:lang="en-US">Battery modeling; Fuzzy logic; Ni-Cd Battery; Charging current</dc:subject>
	<dc:description xml:lang="en-US">The batteries models found in the literature are based mainly on mathematical descriptions of physical, chemical, and electrochemical properties which are difficult to determine. This paper presents new fuzzy based model for Nickel Cadmium (Ni-Cd) batteries. The main advantage of the proposed models is that, the proposed model is able to predict battery output voltage without knowledge of numerous factors. Inputs of the proposed model are battery current and state of charge while battery voltage is selected as the output. To check the accuracy of the proposed models, simulations results are compared with the measured battery data at different charge current as well as many other battery models for a 7Ah, size F, Ni-Cd battery. Simulated shows good agreements with measured data. The advantage of fuzzy model is that for modeling by fuzzy method experimental data isn’t needed. The proposed models can apply for modeling of other batteries types.DOI: http://dx.doi.org/10.11591/ij-ai.v2i2.1784</dc:description>
	<dc:publisher xml:lang="en-US">Institute of Advanced Engineering and Science</dc:publisher>
	<dc:contributor xml:lang="en-US"></dc:contributor>
	<dc:date>2013-06-01</dc:date>
	<dc:type>info:eu-repo/semantics/article</dc:type>
	<dc:type>info:eu-repo/semantics/publishedVersion</dc:type>
	<dc:type xml:lang="en-US"></dc:type>
	<dc:format>application/pdf</dc:format>
	<dc:identifier>https://ijai.iaescore.com/index.php/IJAI/article/view/1367</dc:identifier>
	<dc:source xml:lang="en-US">IAES International Journal of Artificial Intelligence (IJ-AI); Vol 2, No 2: June 2013; 81-89</dc:source>
	<dc:source>2252-8938</dc:source>
	<dc:source>2089-4872</dc:source>
	<dc:source>10.11591/ijai.v2.i2</dc:source>
	<dc:language>eng</dc:language>
	<dc:relation>https://ijai.iaescore.com/index.php/IJAI/article/view/1367/1203</dc:relation>
	<dc:rights xml:lang="en-US">Copyright (c) 2013 Institute of Advanced Engineering and Science</dc:rights>
	<dc:rights xml:lang="en-US">http://creativecommons.org/licenses/by-sa/4.0</dc:rights>
</oai_dc:dc>