Melola Discovery

← Melola Discovery

Jurnal SINTA 1

Perolehan Tio2 Dari Iron Ore Mengandung Titanium Melalui Proses Reduksi Karbon Dan Pelarutan Asam

INDONESIAN JOURNAL OF APPLIED PHYSICS · Vol. 2 No. 02 (2016) · hlm. 37–45

DOI
10.13057/ijap.v2i02.1288
ISSN
2477-6416, 2089-0133
Terbit
2016-05-22
Penerbit
Department of Physics, Sebelas Maret University
Bahasa
eng

Abstrak

REDUCTION AND LEACHING PROCESSES. Indonesia has a large source of iron ore which is quite tempting for the purposes of exploitation in form of raw materials as well as for the production of pig iron. However, not all sources of iron ore are proved useful since not only because the present of deposit is scattere dinamounts of less significant but also because it contains element of tin oxide compounds with iron like ilmenite or FeTiO3. However,ilmenite can actually be used as a source of titanium metal which is much more valuable than Fe it self. In order to recover the Ti from their respective compound it is required the release of strong bonds between the atoms in the compound. This paper reports the recovery of Ti oxide of ilmenite containing iron ore which was obtained through a combination of carbon reduction and acid leaching processes. Carbon reduction of iron ore was carried out through mechanical milling between iron ore and carbon with a ratio of 1:1. This was successively followed by a sintering at a temperature of 1000 oC employing a heating rate of 10 ° C/min for 0-3 hours. The reduction process has resulted in the formation of 27.83wt% TiO2. In order to improve the recovery level of TiO2, further reduction process was conducted through an HCl leaching. This successive stage produced fine powders in the form of deposits. Based on our quantitative analysis, the recovery of TiO2 increased to a level of 73.73%.

Jaringan kolaborasi para penulis

4 penulis · 4 tautan kepenulisan bersama

Arahkan kursor atau ketuk sebuah nama untuk menyorot rekan penulisnya. Klik dua kali untuk membuka halaman penulis.

  • Diponegoro University
  • Afiliasi tidak diketahui
  • Organisasi berbeda
  • Organisasi sama
  • Afiliasi tidak diketahui
  • Garis lebih tebal = lebih banyak artikel bersama · lingkaran lebih besar = lebih banyak artikel
Tampilkan sebagai tabel
Rekan penulisOrganisasiArtikel bersama
Priyono PriyonoDiponegoro University1
Eddy S. SiradjAfiliasi tidak diketahui1

Afiliasi berasal dari OpenAlex; metadata OAI-PMH jurnal tidak memuatnya. Penulis tanpa ID OpenAlex dicocokkan berdasarkan nama, sehingga dua orang bisa tergabung atau satu orang bisa terpisah.

Sumber metadata: OAI-PMH (metadata jurnal) https://jurnal.uns.ac.id/ijap/oai, pertama di-harvest 8 Nov 2026, terakhir terlihat 16 Nov 2026.
Metadata asli (oai_dc)
<oai_dc:dc xmlns="http://www.openarchives.org/OAI/2.0/" xmlns:dc="http://purl.org/dc/elements/1.1/" xmlns:oai_dc="http://www.openarchives.org/OAI/2.0/oai_dc/" xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance" xsi:schemaLocation="http://www.openarchives.org/OAI/2.0/oai_dc/  http://www.openarchives.org/OAI/2.0/oai_dc.xsd">
	<dc:title xml:lang="en-US">Perolehan Tio2 Dari Iron Ore Mengandung Titanium Melalui Proses Reduksi Karbon Dan Pelarutan Asam</dc:title>
	<dc:creator>Rayhana, Elda</dc:creator>
	<dc:creator>Manaf, Azwar</dc:creator>
	<dc:description xml:lang="en-US">REDUCTION AND LEACHING PROCESSES. Indonesia has a large source of iron ore which is quite tempting for the purposes of exploitation in form of raw materials as well as for the production of pig iron. However, not all sources of iron ore are proved useful since not only because the present of deposit is scattere dinamounts of less significant but also because it contains element of tin oxide compounds with iron like ilmenite or FeTiO3. However,ilmenite can actually be used as a source of titanium metal which is much more valuable than Fe it self. In order to recover the Ti from their respective compound it is required the release of strong bonds between the atoms in the compound. This paper reports the recovery of Ti oxide of ilmenite containing iron ore which was obtained through a combination of carbon reduction and acid leaching processes. Carbon reduction of iron ore was carried out through mechanical milling between iron ore and carbon with a ratio of 1:1. This was successively followed by a sintering at a temperature of 1000 oC employing a heating rate of 10 ° C/min for 0-3 hours. The reduction process has resulted in the formation of 27.83wt% TiO2. In order to improve the recovery level of TiO2, further reduction process was conducted through an HCl leaching. This successive stage produced fine powders in the form of deposits. Based on our quantitative analysis, the recovery of TiO2 increased to a level of 73.73%.</dc:description>
	<dc:publisher xml:lang="en-US">Department of Physics, Sebelas Maret University</dc:publisher>
	<dc:contributor xml:lang="en-US"></dc:contributor>
	<dc:date>2016-05-22</dc:date>
	<dc:type>info:eu-repo/semantics/article</dc:type>
	<dc:type>info:eu-repo/semantics/publishedVersion</dc:type>
	<dc:type xml:lang="en-US">Peer-reviewed Article</dc:type>
	<dc:format>application/pdf</dc:format>
	<dc:identifier>https://jurnal.uns.ac.id/ijap/article/view/1288</dc:identifier>
	<dc:identifier>10.13057/ijap.v2i02.1288</dc:identifier>
	<dc:source xml:lang="en-US">INDONESIAN JOURNAL OF APPLIED PHYSICS; Vol 2, No 02 (2012): October; 37-45</dc:source>
	<dc:source>2477-6416</dc:source>
	<dc:source>2089-0133</dc:source>
	<dc:language>eng</dc:language>
	<dc:relation>https://jurnal.uns.ac.id/ijap/article/view/1288/1230</dc:relation>
	<dc:rights xml:lang="en-US">Copyright (c) 2016 INDONESIAN JOURNAL OF APPLIED PHYSICS</dc:rights>
</oai_dc:dc>