Melola Discovery

← Melola Discovery

Jurnal SINTA 1

Conversion of Oil Shale To Liquid Hydrocarbons as A New Energy Resources Using Iron (Fe)-Pillared Clay (Kaolinite) Catalyst

INDONESIAN JOURNAL OF APPLIED PHYSICS · Vol. 12 No. 2 (2022) · hlm. 197–216

DOI
10.13057/ijap.v12i2.58414
ISSN
2477-6416, 2089-0133
Terbit
2022-10-04
Penerbit
Department of Physics, Sebelas Maret University
Bahasa
eng

Abstrak

In the context of new energy exploration, oil shale is currently a source of energy that is being developed so that it can be used as an alternative energy in the future. Based on this background, it is important to research the conversion method of oil shale to liquid hydrocarbons. The method used is using clay (kaolinite) catalyst and iron (Fe)-pillared clay (kaolinite) catalyst. Clay catalyst products are capable of making organic mature faster and even requiring a lower temperature for the changes (through thermal cracking of non-volatile organic material). The addition of Fe metal in the clay catalyst product to oil shale, causing the surface area of the natural clays were significantly increased, then the volume of micro pore were also increased, it causes the organic material to mature faster and the temperature required for the change is less than the shale material without Fe. The catalyst method by the pillarization technique able to increase the surface area and pore volume, thus accelerating the reaction and changing the reaction rate to be greater. It is observed that clay catalyst products can serve as catalysts for accelerating organic maturation reactions. if compared between the clay material of OD1-Ast1 (50% clay-50% organic), OD1-Ast2 (33% clay-67% organic), and the OD1-Ast3 shale material (67% clay - 33% organic),then OD1-Ast3 has a faster reaction rate. Comparison of clay material is smaller than organic, then the properties of the catalyst product to accelerate the reaction are reduced, such as the OD1-Ast2 shale material has a slow reaction rate compared to the OD1-Ast3 shale material. The addition of Fe metal in the clay catalyst product to the OD1-Ast2 shale material, resulting in OD1-Ast2-Fe shale material (75% OD1-Ast2 and 25% Fe) having a faster reaction rate than before the addition of Fe metal.The design of heavy (%) clay (kaolinite) and Fe pilaration on oil shale were greatly influence the change of TOC values when heated,then affecting maturation and Tmax. The temperature of maturation and Tmax as the main parameters of conversion of oil shale to liquid hydrocarbon. This method supports the development of science and technology in the field of exploitation and processing of natural resources.

Kata kunci

Jaringan kolaborasi para penulis

30 penulis · 57 tautan kepenulisan bersama · 18 lintas organisasi

Arahkan kursor atau ketuk sebuah nama untuk menyorot rekan penulisnya. Klik dua kali untuk membuka halaman penulis.

  • Sebelas Maret University
  • Lampung University
  • National Research and Innovation Agency
  • Universitas Nusantara PGRI Kediri
  • Bandung Institute of Technology
  • Pusat Survei Geologi
  • Diponegoro University
  • Afiliasi tidak diketahui
  • Organisasi berbeda
  • Organisasi sama
  • Afiliasi tidak diketahui
  • Garis lebih tebal = lebih banyak artikel bersama · lingkaran lebih besar = lebih banyak artikel
Tampilkan sebagai tabel
Rekan penulisOrganisasiArtikel bersama
Minar FerichaniSebelas Maret University2
Andy Setyo WibowoPusat Survei Geologi2
Rahmat Catur WibowoLampung University1
Aryka Claudia Eka PutriLampung University1
Feny Rita FiantikaUniversitas Nusantara PGRI Kediri1
Ika S.Universitas Nusantara PGRI Kediri1
Fudji Sri Mar’atiDiponegoro University1
Riyani RiyaniSebelas Maret University1
Supanggyo SupanggyoSebelas Maret University1
Darmanto DarmantoSebelas Maret University1
Elin NurainiNational Research and Innovation Agency1
Saefurrochman SaefurrochmanNational Research and Innovation Agency1
Sutadi SutadiNational Research and Innovation Agency1
Sinta Nur Rizqi ListantiSebelas Maret University1
Yusep Muslih PurwanaSebelas Maret University1
Sorja KoesumaSebelas Maret University1
Yudi PurwantoSebelas Maret University1
Nanda Paquita SyaharaniLampung University1
Darsono DarsonoSebelas Maret University1
Julikah JulikahAfiliasi tidak diketahui1
Humbang PurbaAfiliasi tidak diketahui1
Muhamad Defi AryantoAfiliasi tidak diketahui1
Bagus Sapto MulyatnoLampung University1
Isti Nur KumalasariLampung University1
Andri KurniawanLampung University1
Asep IrawanLampung University1

Afiliasi berasal dari OpenAlex; metadata OAI-PMH jurnal tidak memuatnya. Penulis tanpa ID OpenAlex dicocokkan berdasarkan nama, sehingga dua orang bisa tergabung atau satu orang bisa terpisah.

Sumber metadata: OAI-PMH (metadata jurnal) https://jurnal.uns.ac.id/ijap/oai, pertama di-harvest 8 Nov 2026, terakhir terlihat 8 Nov 2026.
Metadata asli (oai_dc)
<oai_dc:dc xmlns="http://www.openarchives.org/OAI/2.0/" xmlns:dc="http://purl.org/dc/elements/1.1/" xmlns:oai_dc="http://www.openarchives.org/OAI/2.0/oai_dc/" xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance" xsi:schemaLocation="http://www.openarchives.org/OAI/2.0/oai_dc/  http://www.openarchives.org/OAI/2.0/oai_dc.xsd">
	<dc:title xml:lang="en-US">Conversion of Oil Shale To Liquid Hydrocarbons as A New Energy Resources Using Iron (Fe)-Pillared Clay (Kaolinite) Catalyst</dc:title>
	<dc:creator>Dewanto, Ordas</dc:creator>
	<dc:creator>Ferucha, Istifani</dc:creator>
	<dc:creator>Darsono, Darsono</dc:creator>
	<dc:creator>Rizky, Sri</dc:creator>
	<dc:subject xml:lang="en-US">oil shale; clay; iron (Fe)-pillared; maturation; TOC; Tmax</dc:subject>
	<dc:description xml:lang="en-US">In the context of new energy exploration, oil shale is currently a source of energy that is being developed so that it can be used as an alternative energy in the future. Based on this background, it is important to research the conversion method of oil shale to liquid hydrocarbons. The method used is using clay (kaolinite) catalyst and  iron (Fe)-pillared clay (kaolinite) catalyst. Clay catalyst products are capable of making organic mature faster and even requiring a lower temperature for the changes (through thermal cracking of non-volatile organic material). The addition of Fe metal in the clay catalyst product to oil shale, causing the surface area of the natural clays were significantly increased, then the volume of micro pore were also increased, it causes the organic material to mature faster and the temperature required for the change is less than the shale material without Fe. The catalyst method by the pillarization technique able to increase the surface area and pore volume, thus accelerating the reaction and changing the reaction rate to be greater. It is observed that clay catalyst products can serve as catalysts for accelerating organic maturation reactions. if compared between the clay material  of OD1-Ast1 (50% clay-50% organic), OD1-Ast2 (33% clay-67% organic), and the OD1-Ast3 shale material (67% clay - 33% organic),then OD1-Ast3 has a faster reaction rate. Comparison of clay material is smaller than organic, then the properties of the catalyst product to accelerate the reaction are reduced, such as the OD1-Ast2 shale material has a slow reaction rate compared to the OD1-Ast3 shale material. The addition of Fe metal in the clay catalyst product to the OD1-Ast2 shale material, resulting in OD1-Ast2-Fe shale material (75% OD1-Ast2 and 25% Fe) having a faster reaction rate than before the addition of Fe metal.The design of heavy (%) clay (kaolinite) and Fe pilaration on oil shale were greatly influence the change of TOC values when heated,then affecting maturation and Tmax. The temperature of maturation and Tmax as the main parameters of conversion of oil shale to liquid hydrocarbon. This method supports the development of science and technology in the field of exploitation and processing of natural resources.</dc:description>
	<dc:publisher xml:lang="en-US">Department of Physics, Sebelas Maret University</dc:publisher>
	<dc:contributor xml:lang="en-US">University of Lampung</dc:contributor>
	<dc:date>2022-10-04</dc:date>
	<dc:type>info:eu-repo/semantics/article</dc:type>
	<dc:type>info:eu-repo/semantics/publishedVersion</dc:type>
	<dc:type xml:lang="en-US">Peer-reviewed Article</dc:type>
	<dc:format>application/pdf</dc:format>
	<dc:identifier>https://jurnal.uns.ac.id/ijap/article/view/58414</dc:identifier>
	<dc:identifier>10.13057/ijap.v12i2.58414</dc:identifier>
	<dc:source xml:lang="en-US">INDONESIAN JOURNAL OF APPLIED PHYSICS; Vol 12, No 2 (2022): October; 197-216</dc:source>
	<dc:source>2477-6416</dc:source>
	<dc:source>2089-0133</dc:source>
	<dc:language>eng</dc:language>
	<dc:relation>https://jurnal.uns.ac.id/ijap/article/view/58414/37673</dc:relation>
	<dc:rights xml:lang="en-US">Copyright (c) 2022 INDONESIAN JOURNAL OF APPLIED PHYSICS</dc:rights>
</oai_dc:dc>