Melola Discovery

← Melola Discovery

Jurnal SINTA 1

Adsorption Behavior of Sugarcane Bagasse-Derived Activated Carbon as a Copper Removal

INDONESIAN JOURNAL OF APPLIED PHYSICS · Vol. 15 No. 1 (2025) · hlm. 98–109

DOI
10.13057/ijap.v15i1.87564
ISSN
2477-6416, 2089-0133
Terbit
2025-05-04
Penerbit
Department of Physics, Sebelas Maret University
Bahasa
eng

Abstrak

This study aims to remove Cu2+ as a heavy metal inside the sample solution implementation. Eliminating heavy metals through activated carbon utilizes sugarcane bagasse's high carbon content, which is rich in cellulose, lignin, and hemicellulose. There are various methods for eliminating metal content, including activation using Acid 0.1 M Hydrochloric Acid (HCl), Base 0.1 M Sodium Hydroxide (NaOH), and without using activation media. The method considers the different ion Cu2+ initial concentrations and contact times. Detailed initial concentrations of Cu2+ were conducted using CuSO4 media for 2.5, 5, 10, and 15 ppm and 15, 30, 60, and 120 minutes for length of contact time. For the result, the transmittance of FTIR showed a primary functional group of Activated Carbon (AC) on SBAC-1, comprising O-H, C-O, and C=O. The Brunauer-Emmett-Teller (BET) analysis also shows the significant value reaching 458.607 m2/g surface area's adsorption and had qmax = 8.13 mg/g, the highest adsorption capacity. The plot brings about the adsorption mechanism as physiochemical & multilayer adsorption, with a physisorption layer with percent removal of Cu2+ at 81.3% at 30 minutes optimum time and optimum initial concentration of 5 mg/L with 82.2 % absorption on SBAC-1. The determination of Freundlich as the isotherm model is the most suitable mechanism of absorption for all process variations and generates a R2 value of 0.9731 for the SBAC-1 sample.

Kata kunci

Jaringan kolaborasi para penulis

29 penulis · 117 tautan kepenulisan bersama · 64 lintas organisasi

Arahkan kursor atau ketuk sebuah nama untuk menyorot rekan penulisnya. Klik dua kali untuk membuka halaman penulis.

  • Universitas Pertamina
  • Pertamina (Indonesia)
  • Universitas Gadjah Mada
  • National Research and Innovation Agency
  • Sebelas Maret University
  • National Taiwan University of Science and Technology
  • Gyeongsang National University
  • Afiliasi tidak diketahui
  • Organisasi berbeda
  • Organisasi sama
  • Afiliasi tidak diketahui
  • Garis lebih tebal = lebih banyak artikel bersama · lingkaran lebih besar = lebih banyak artikel
Tampilkan sebagai tabel
Rekan penulisOrganisasiArtikel bersama
TriyonoAfiliasi tidak diketahui1
Wega TrisunaryantiUniversitas Gadjah Mada1
Dyah Ayu FatmawatiUniversitas Gadjah Mada1
Uswatul ChasanahUniversitas Gadjah Mada1
Iman SantosoUniversitas Gadjah Mada1
Fitria RahmawatiSebelas Maret University1
Idul Fitri NurcahyoSebelas Maret University1
Imam Shofid AlaihGyeongsang National University1
Azka W RosalinSebelas Maret University1
Hartoto NursukatmoPertamina (Indonesia)1
Hanida NilasaryPertamina (Indonesia)1
Edo RaihanPertamina (Indonesia)1
Soraya Ulfa MuzayanhaPertamina (Indonesia)1
Muhammad F. A. HandakaPertamina (Indonesia)1
Heri JodiNational Research and Innovation Agency1
Sudaryanto SudaryantoNational Research and Innovation Agency1
Nadhifah SalsabilaUniversitas Pertamina1
Puspita Ayu Kusuma SariUniversitas Pertamina1
Adinandra Caesar FachrudinUniversitas Gadjah Mada1
Adinda Atalya SalsabilaUniversitas Pertamina1
Slamet PriyonoNational Research and Innovation Agency1
Muhammad Dikdik GumelarNational Research and Innovation Agency1

Afiliasi berasal dari OpenAlex; metadata OAI-PMH jurnal tidak memuatnya. Penulis tanpa ID OpenAlex dicocokkan berdasarkan nama, sehingga dua orang bisa tergabung atau satu orang bisa terpisah.

Sumber metadata: OAI-PMH (metadata jurnal) https://jurnal.uns.ac.id/ijap/oai, pertama di-harvest 8 Nov 2026, terakhir terlihat 8 Nov 2026.
Metadata asli (oai_dc)
<oai_dc:dc xmlns="http://www.openarchives.org/OAI/2.0/" xmlns:dc="http://purl.org/dc/elements/1.1/" xmlns:oai_dc="http://www.openarchives.org/OAI/2.0/oai_dc/" xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance" xsi:schemaLocation="http://www.openarchives.org/OAI/2.0/oai_dc/  http://www.openarchives.org/OAI/2.0/oai_dc.xsd">
	<dc:title xml:lang="en-US">Adsorption Behavior of Sugarcane Bagasse-Derived Activated Carbon as a Copper Removal</dc:title>
	<dc:creator>Amanah, Nur Layli</dc:creator>
	<dc:creator>Manuputty, Alsello Diveni</dc:creator>
	<dc:creator>Ramadhani, Fadila Arum</dc:creator>
	<dc:creator>Floresyona, Dita</dc:creator>
	<dc:creator>Nursanto, Eduardus Budi</dc:creator>
	<dc:creator>Oktaviano, Haryo Satriya</dc:creator>
	<dc:creator>Nugroho, Agung</dc:creator>
	<dc:subject xml:lang="en-US">Adsorption; Wastewater; Activated Carbon; Copper Ion; Sugarcane Bagasse</dc:subject>
	<dc:description xml:lang="en-US">This study aims to remove Cu2+ as a heavy metal inside the sample solution implementation. Eliminating heavy metals through activated carbon utilizes sugarcane bagasse's high carbon content, which is rich in cellulose, lignin, and hemicellulose. There are various methods for eliminating metal content, including activation using Acid 0.1 M Hydrochloric Acid (HCl),  Base 0.1 M Sodium Hydroxide (NaOH), and without using activation media. The method considers the different ion Cu2+ initial concentrations and contact times. Detailed initial concentrations of Cu2+ were conducted using CuSO4 media for 2.5, 5, 10, and 15 ppm and 15, 30, 60, and 120 minutes for length of contact time. For the result, the transmittance of FTIR showed a primary functional group of Activated Carbon (AC) on SBAC-1, comprising O-H, C-O, and C=O. The Brunauer-Emmett-Teller (BET) analysis also shows the significant value reaching 458.607 m2/g surface area's adsorption and had qmax = 8.13 mg/g, the highest adsorption capacity. The plot brings about the adsorption mechanism as physiochemical &amp;amp; multilayer adsorption, with a physisorption layer with percent removal of Cu2+ at 81.3% at 30 minutes optimum time and optimum initial concentration of 5 mg/L with 82.2 % absorption on SBAC-1. The determination of Freundlich as the isotherm model is the most suitable mechanism of absorption for all process variations and generates a R2 value of 0.9731 for the SBAC-1 sample.</dc:description>
	<dc:publisher xml:lang="en-US">Department of Physics, Sebelas Maret University</dc:publisher>
	<dc:contributor xml:lang="en-US">PT. Pertamina (Persero)</dc:contributor>
	<dc:date>2025-05-04</dc:date>
	<dc:type>info:eu-repo/semantics/article</dc:type>
	<dc:type>info:eu-repo/semantics/publishedVersion</dc:type>
	<dc:type xml:lang="en-US">Peer-reviewed Article</dc:type>
	<dc:format>application/pdf</dc:format>
	<dc:identifier>https://jurnal.uns.ac.id/ijap/article/view/87564</dc:identifier>
	<dc:identifier>10.13057/ijap.v15i1.87564</dc:identifier>
	<dc:source xml:lang="en-US">INDONESIAN JOURNAL OF APPLIED PHYSICS; Vol 15, No 1 (2025): April; 98-109</dc:source>
	<dc:source>2477-6416</dc:source>
	<dc:source>2089-0133</dc:source>
	<dc:language>eng</dc:language>
	<dc:relation>https://jurnal.uns.ac.id/ijap/article/view/87564/50045</dc:relation>
	<dc:rights xml:lang="en-US">Copyright (c) 2025 INDONESIAN JOURNAL OF APPLIED PHYSICS</dc:rights>
</oai_dc:dc>