Melola Discovery

← Melola Discovery

Jurnal SINTA 1

Pengaruh Temperatur Rendah pada Sifat Bending dari Pipa Komposit Epoxy dengan Penguatan Serat Jute

INDONESIAN JOURNAL OF APPLIED PHYSICS · Vol. 11 No. 2 (2021) · hlm. 200–209

DOI
10.13057/ijap.v11i2.51243
ISSN
2477-6416, 2089-0133
Terbit
2021-10-17
Penerbit
Department of Physics, Sebelas Maret University
Bahasa
eng

Abstrak

The experiment about the bending behavior of pipe composite based under the low-temperature treatment was carried out. As for the background of this research is that composite material become a suitable design with user need and it has behavior to substitute metal in engineering products. The research aims to investigate the effect of low temperature against to bending strength behavior of pipe from composite epoxy with jute fiber reinforcement. The low-temperature treatment was applied through an immersion process in dry ice as long as 60 minutes to produces a temperature of -33oC. The pipe composite was manufactured in lamination three layers of jute fabric using the vacuum injection molding process (VRTM). Then, the strength of the composite pipe was tested on the three-point bending method according to the ASTM D 790 standard. The testing results show that composite pipe with low-temperature treatment has a flexural strength average of about 76.559 MPa. Meanwhile, the compo-site pipe without treatment shows the strength of flexural average of about 52.435 MPa. They have the strength of flexural inclination is an average of 68%. In addition, the failures of composite in three-point bending test shows a shrank mode on the compression side and flat tearing at tension side due to the material becomes brittle. The conclusion that low-temperature treatment has an effective influence on the pipe composite mechanical properties.

Kata kunci

Jaringan kolaborasi para penulis

12 penulis · 22 tautan kepenulisan bersama · 3 lintas organisasi

Arahkan kursor atau ketuk sebuah nama untuk menyorot rekan penulisnya. Klik dua kali untuk membuka halaman penulis.

  • Udayana University
  • Politeknik Negeri Bali
  • Afiliasi tidak diketahui
  • Organisasi berbeda
  • Organisasi sama
  • Afiliasi tidak diketahui
  • Garis lebih tebal = lebih banyak artikel bersama · lingkaran lebih besar = lebih banyak artikel
Tampilkan sebagai tabel
Rekan penulisOrganisasiArtikel bersama
Ni Wayan SugiartiUdayana University1
K. Adi AtmikaUdayana University1
A.R FaridAfiliasi tidak diketahui1
I.P. Artha WirawanUdayana University1
I.K AdiatmikaUdayana University1
I Made ArsawanPoliteknik Negeri Bali1
I KG WirawanAfiliasi tidak diketahui1
Dnk Putra NegaraUdayana University1
NW SugiartiUdayana University1

Afiliasi berasal dari OpenAlex; metadata OAI-PMH jurnal tidak memuatnya. Penulis tanpa ID OpenAlex dicocokkan berdasarkan nama, sehingga dua orang bisa tergabung atau satu orang bisa terpisah.

Sumber metadata: OAI-PMH (metadata jurnal) https://jurnal.uns.ac.id/ijap/oai, pertama di-harvest 8 Nov 2026, terakhir terlihat 16 Nov 2026.
Metadata asli (oai_dc)
<oai_dc:dc xmlns="http://www.openarchives.org/OAI/2.0/" xmlns:dc="http://purl.org/dc/elements/1.1/" xmlns:oai_dc="http://www.openarchives.org/OAI/2.0/oai_dc/" xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance" xsi:schemaLocation="http://www.openarchives.org/OAI/2.0/oai_dc/  http://www.openarchives.org/OAI/2.0/oai_dc.xsd">
	<dc:title xml:lang="en-US">Pengaruh Temperatur Rendah pada Sifat Bending dari Pipa Komposit Epoxy dengan Penguatan Serat Jute</dc:title>
	<dc:creator>Pramadyanti, I.A.N</dc:creator>
	<dc:creator>Adi Atmika, I.K</dc:creator>
	<dc:creator>Ary Subagia, I.D.G</dc:creator>
	<dc:subject xml:lang="en-US">bending test; jute fiber; low temperature; pipe composite; vartm.</dc:subject>
	<dc:description xml:lang="en-US">The experiment about the bending behavior of pipe composite based under the low-temperature treatment was carried out. As for the background of this research is that composite material become a suitable design with user need and it has behavior to substitute metal in engineering products. The research aims to investigate the effect of low temperature against to bending strength behavior of pipe from composite epoxy with jute fiber reinforcement. The low-temperature treatment was applied through an immersion process in dry ice as long as 60 minutes to produces a temperature of -33oC. The pipe composite was manufactured in lamination three layers of jute fabric using the vacuum injection molding process (VRTM). Then, the strength of the composite pipe was tested on the three-point bending method according to the ASTM D 790 standard. The testing results show that composite pipe with low-temperature treatment has a flexural strength average of about 76.559 MPa. Meanwhile, the compo-site pipe without treatment shows the strength of flexural average of about 52.435 MPa. They have the strength of flexural inclination is an average of 68%. In addition, the failures of composite in three-point bending test shows a shrank mode on the compression side and flat tearing at tension side due to the material becomes brittle. The conclusion that low-temperature treatment has an effective influence on the pipe composite mechanical properties.</dc:description>
	<dc:publisher xml:lang="en-US">Department of Physics, Sebelas Maret University</dc:publisher>
	<dc:contributor xml:lang="en-US"></dc:contributor>
	<dc:date>2021-10-17</dc:date>
	<dc:type>info:eu-repo/semantics/article</dc:type>
	<dc:type>info:eu-repo/semantics/publishedVersion</dc:type>
	<dc:type xml:lang="en-US">Peer-reviewed Article</dc:type>
	<dc:format>application/pdf</dc:format>
	<dc:identifier>https://jurnal.uns.ac.id/ijap/article/view/51243</dc:identifier>
	<dc:identifier>10.13057/ijap.v11i2.51243</dc:identifier>
	<dc:source xml:lang="en-US">INDONESIAN JOURNAL OF APPLIED PHYSICS; Vol 11, No 2 (2021): October; 200-209</dc:source>
	<dc:source>2477-6416</dc:source>
	<dc:source>2089-0133</dc:source>
	<dc:language>eng</dc:language>
	<dc:relation>https://jurnal.uns.ac.id/ijap/article/view/51243/33181</dc:relation>
	<dc:rights xml:lang="en-US">Copyright (c) 2021 INDONESIAN JOURNAL OF APPLIED PHYSICS</dc:rights>
</oai_dc:dc>