Jurnal
SINTA 1
Control design of a de-weighting upper-limb exoskeleton: extended-based fuzzy
Indonesian Journal of Electical Engineering and Informatics (IJEEI) · Vol. 7 No. 1 (2019) · hlm. 1–14
ISSN 2089-3272, 2089-3272
Terbit 2019-03-25
Penerbit IAES Indonesian Section
Bahasa en
Abstrak
One of the most common issues to human is fatigue. A technology known as exoskeleton has been identified as one of the solutions to address this issue. However, there are two issues that need to be solved. One of them is the control approach. Hence, the main aim of this work, is to investigate the control design for upper-limb exoskeleton. An extended based fuzzy control is proposed to observe the effectiveness of the exoskeleton in dealing with human with different strength. Three conditions of human strength were applied. PID was used for a comparison purpose. It is shown that with the proposed control approach, the exoskeleton can assist human to achieve the desired trajectory accurately with a minimal amount of torque required.
Jaringan kolaborasi para penulis
7 penulis ·
10 tautan kepenulisan bersama
· 8 lintas organisasi
Arahkan kursor atau ketuk sebuah nama untuk menyorot rekan penulisnya. Klik dua kali untuk membuka halaman penulis.
Muhammadiyah University of Surakarta Universiti Teknikal Malaysia Melaka Universiti Putra Malaysia London South Bank University Universiti Teknologi MARA
Organisasi berbeda
Organisasi sama
Afiliasi tidak diketahui
Garis lebih tebal = lebih banyak artikel bersama · lingkaran lebih besar = lebih banyak artikel
Tampilkan sebagai tabel
Afiliasi berasal dari OpenAlex; metadata OAI-PMH jurnal tidak memuatnya. Penulis tanpa ID OpenAlex dicocokkan berdasarkan nama, sehingga dua orang bisa tergabung atau satu orang bisa terpisah.
Sumber metadata: OAI-PMH (metadata jurnal) http://section.iaesonline.com/index.php/IJEEI/oai, pertama di-harvest 8 Nov 2026, terakhir terlihat 8 Nov 2026.
Metadata asli (oai_dc)
<oai_dc:dc xmlns="http://www.openarchives.org/OAI/2.0/" xmlns:dc="http://purl.org/dc/elements/1.1/" xmlns:oai_dc="http://www.openarchives.org/OAI/2.0/oai_dc/" xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance" xsi:schemaLocation="http://www.openarchives.org/OAI/2.0/oai_dc/ http://www.openarchives.org/OAI/2.0/oai_dc.xsd">
<dc:title xml:lang="en">Control design of a de-weighting upper-limb exoskeleton: extended-based fuzzy</dc:title>
<dc:creator xml:lang="en">Ali, Siti Khadijah</dc:creator>
<dc:creator xml:lang="en">Tokhi, M. Osman</dc:creator>
<dc:subject xml:lang="en">Control approach</dc:subject>
<dc:subject xml:lang="en">Extended-based fuzzy control</dc:subject>
<dc:subject xml:lang="en">Fuzzy logic control</dc:subject>
<dc:subject xml:lang="en">Muscle fatigue</dc:subject>
<dc:subject xml:lang="en">Upper-limb exoskeleton</dc:subject>
<dc:description xml:lang="en">One of the most common issues to human is fatigue. A technology known as exoskeleton has been identified as one of the solutions to address this issue. However, there are two issues that need to be solved. One of them is the control approach. Hence, the main aim of this work, is to investigate the control design for upper-limb exoskeleton. An extended based fuzzy control is proposed to observe the effectiveness of the exoskeleton in dealing with human with different strength. Three conditions of human strength were applied. PID was used for a comparison purpose. It is shown that with the proposed control approach, the exoskeleton can assist human to achieve the desired trajectory accurately with a minimal amount of torque required.</dc:description>
<dc:publisher xml:lang="en">IAES Indonesian Section</dc:publisher>
<dc:date>2019-03-25</dc:date>
<dc:type>info:eu-repo/semantics/article</dc:type>
<dc:type>info:eu-repo/semantics/publishedVersion</dc:type>
<dc:format>application/pdf</dc:format>
<dc:identifier>https://section.iaesonline.com/index.php/IJEEI/article/view/938</dc:identifier>
<dc:identifier>10.52549/ijeei.v7i1.938</dc:identifier>
<dc:source xml:lang="en">Indonesian Journal of Electrical Engineering and Informatics (IJEEI); Vol. 7 No. 1: March 2019; 1-14</dc:source>
<dc:source>2089-3272</dc:source>
<dc:source>2089-3272</dc:source>
<dc:language>en</dc:language>
<dc:relation>https://section.iaesonline.com/index.php/IJEEI/article/view/938/pdf</dc:relation>
</oai_dc:dc>
Sitasi dan pengindeksan
Jumlah menurut tiap indeks pada 13 Nov 2026; setiap indeks menghitung sitasi dengan cara berbeda.
OpenAlex juga mencatat karya ini di: crossref.
Sitasi artikel ini
APA 7
Ali, S. K., & Tokhi, M. O. (2019). Control design of a de-weighting upper-limb exoskeleton: extended-based fuzzy. Indonesian Journal of Electical Engineering and Informatics (IJEEI), 7(1), 1–14. https://doi.org/10.52549/ijeei.v7i1.938
Salin
IEEE
S. K. Ali and M. O. Tokhi, “Control design of a de-weighting upper-limb exoskeleton: extended-based fuzzy,” Indonesian Journal of Electical Engineering and Informatics (IJEEI), vol. 7, no. 1, pp. 1–14, 2019, doi: 10.52549/ijeei.v7i1.938.
Salin
Dibuat dari metadata jurnal; periksa nama penulis sebelum dipakai.