Melola Discovery

← Melola Discovery

Jurnal SINTA 1

Performance Analysis of Montgomery Multiplier using 32nm CNTFET Technology

Indonesian Journal of Electical Engineering and Informatics (IJEEI) · Vol. 7 No. 4 (2019) · hlm. 697–702

DOI
10.52549/ijeei.v7i4.1459
ISSN
2089-3272, 2089-3272
Terbit
2019-12-31
Penerbit
IAES Indonesian Section
Bahasa
en

Abstrak

In VLSI design vacillating the parameters results in variation of critical factors like area, power and delay. The dominant sources of power dissipation in digital systems are the digital multipliers. A digital multiplier plays a major role in a mixture of arithmetic operations in digital signal processing applications hinge on add and shift algorithms. In order to accomplish high execution speed, parallel array multipliers are comprehensively put into application. The crucial drawback of these multipliers is that it exhausts more power than any other multiplier architectures. Montgomery Multiplication is the popularly used algorithm as it is the most efficient technique to perform arithmetic based calculations. A high-speed multiplier is greatly coveted for its extraordinary leverage. The primary blocks of a multiplier are basically comprised of adders. Thus, in order to attain a significant reduction in power consumption at the chip level the power utilization in adders can be decreased. To obtain desired results in performance parameters of the multiplier an efficient and dynamic adder is proposed and incorporated in the Montgomery multiplier. The Carbon Nanotube field effect transistor (CNTFET) is a promising new device that may supersede some of the fundamental limitations of a silicon based MOSFET. The architecture has been designed in 130nm and 32nm CMOS and CNTFET technology in Synopsys HSpice. The analysed parameters that are considered in determining the performance are power delay product, power and delay and comparison is made with both the technologies.The simulation results of this paper affirmed the CNTFET based Montgomery multiplier improved power consumption by 76.47%,speed by 72.67% and overall energy by 67.76% as compared to MOSFET-based Montgomery multiplier.

Kata kunci

Jaringan kolaborasi para penulis

20 penulis · 87 tautan kepenulisan bersama · 2 lintas organisasi

Arahkan kursor atau ketuk sebuah nama untuk menyorot rekan penulisnya. Klik dua kali untuk membuka halaman penulis.

  • University of Technology Malaysia
  • Sathyabama Institute of Science and Technology
  • Afiliasi tidak diketahui
  • Organisasi berbeda
  • Organisasi sama
  • Afiliasi tidak diketahui
  • Garis lebih tebal = lebih banyak artikel bersama · lingkaran lebih besar = lebih banyak artikel
Tampilkan sebagai tabel
Rekan penulisOrganisasiArtikel bersama
Afiq HamzahUniversity of Technology Malaysia5
Zaharah JohariUniversity of Technology Malaysia4
Norlina Binti ParamanUniversity of Technology Malaysia4
Cheng Siong LimUniversity of Technology Malaysia2
Kien Liong WongUniversity of Technology Malaysia2
Wee Khang ChongUniversity of Technology Malaysia2
Mohd Shahrizal RusliUniversity of Technology Malaysia2
M. Hilman AhmadUniversity of Technology Malaysia2
Mohamad Shukri Zainal AbidinUniversity of Technology Malaysia2
Razali IsmailUniversity of Technology Malaysia2
Mathangi RamakrishnanUniversity of Technology Malaysia2
Usman Ulllah SheikhAfiliasi tidak diketahui2
Mohammed Adamu SuleAfiliasi tidak diketahui2
Mohamad Azri Sufi MahadzirUniversity of Technology Malaysia1
Michael TanAfiliasi tidak diketahui1
Mu Wen ChuanUniversity of Technology Malaysia1

Afiliasi berasal dari OpenAlex; metadata OAI-PMH jurnal tidak memuatnya. Penulis tanpa ID OpenAlex dicocokkan berdasarkan nama, sehingga dua orang bisa tergabung atau satu orang bisa terpisah.

Sumber metadata: OAI-PMH (metadata jurnal) http://section.iaesonline.com/index.php/IJEEI/oai, pertama di-harvest 8 Nov 2026, terakhir terlihat 8 Nov 2026.
Metadata asli (oai_dc)
<oai_dc:dc xmlns="http://www.openarchives.org/OAI/2.0/" xmlns:dc="http://purl.org/dc/elements/1.1/" xmlns:oai_dc="http://www.openarchives.org/OAI/2.0/oai_dc/" xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance" xsi:schemaLocation="http://www.openarchives.org/OAI/2.0/oai_dc/  http://www.openarchives.org/OAI/2.0/oai_dc.xsd">
	<dc:title xml:lang="en">Performance Analysis of Montgomery Multiplier using 32nm CNTFET Technology</dc:title>
	<dc:creator xml:lang="en">Mathan, N</dc:creator>
	<dc:creator xml:lang="en">Jayashri, S</dc:creator>
	<dc:creator xml:lang="en">Alias, Nurul Ezaila</dc:creator>
	<dc:creator xml:lang="en">Tan, Michael Loong Peng</dc:creator>
	<dc:subject xml:lang="en">Montgomery multiplier</dc:subject>
	<dc:subject xml:lang="en">Carbon nanotube</dc:subject>
	<dc:subject xml:lang="en">CNTFET</dc:subject>
	<dc:subject xml:lang="en">Power Delay Product</dc:subject>
	<dc:description xml:lang="en">In VLSI design vacillating the parameters results in variation of critical factors like area, power and delay. The dominant sources of power dissipation in digital systems are the digital multipliers. A digital multiplier plays a major role in a mixture of arithmetic operations in digital signal processing applications hinge on add and shift algorithms. In order to accomplish high execution speed, parallel array multipliers are comprehensively put into application. The crucial drawback of these multipliers is that it exhausts more power than any other multiplier architectures. Montgomery Multiplication is the popularly used algorithm as it is the most efficient technique to perform arithmetic based calculations. A high-speed multiplier is greatly coveted for its extraordinary leverage. The primary blocks of a multiplier are basically comprised of adders. Thus, in order to attain a significant reduction in power consumption at the chip level the power utilization in adders can be decreased. To obtain desired results in performance parameters of the multiplier an efficient and dynamic adder is proposed and incorporated in the Montgomery multiplier. The Carbon Nanotube field effect transistor (CNTFET) is a promising new device that may supersede some of the fundamental limitations of a silicon based MOSFET. The architecture has been designed in 130nm and 32nm CMOS and CNTFET technology in Synopsys HSpice. The analysed parameters that are considered in determining the performance are power delay product, power and delay and comparison is made with both the technologies.The simulation results of this paper affirmed the CNTFET based Montgomery multiplier improved power consumption by 76.47% ,speed by 72.67% and overall energy by 67.76% as compared to MOSFET-based Montgomery multiplier.</dc:description>
	<dc:publisher xml:lang="en">IAES Indonesian Section</dc:publisher>
	<dc:date>2019-12-31</dc:date>
	<dc:type>info:eu-repo/semantics/article</dc:type>
	<dc:type>info:eu-repo/semantics/publishedVersion</dc:type>
	<dc:format>application/pdf</dc:format>
	<dc:identifier>https://section.iaesonline.com/index.php/IJEEI/article/view/1459</dc:identifier>
	<dc:identifier>10.52549/ijeei.v7i4.1459</dc:identifier>
	<dc:source xml:lang="en">Indonesian Journal of Electrical Engineering and Informatics (IJEEI); Vol. 7 No. 4: December 2019; 697-702</dc:source>
	<dc:source>2089-3272</dc:source>
	<dc:source>2089-3272</dc:source>
	<dc:language>en</dc:language>
	<dc:relation>https://section.iaesonline.com/index.php/IJEEI/article/view/1459/466</dc:relation>
</oai_dc:dc>