Melola Discovery

← Melola Discovery

Jurnal SINTA 1

Design of Power-Efficient Structures of the CAM Cell using a New Approach in QCA Nanoelectronics Technology

Indonesian Journal of Electical Engineering and Informatics (IJEEI) · Vol. 9 No. 2 (2021) · hlm. 490–497

DOI
10.52549/ijeei.v9i2.2797
ISSN
2089-3272, 2089-3272
Terbit
2021-05-30
Penerbit
IAES Indonesian Section
Bahasa
en

Abstrak

Quantum-dot Cellular Automata (QCA) is a new emerging nano-electronic technology. Owing to its many fa-vorable features such as low energy requirements, high speed, and small size, QCA is being actively suggested as a future CMOS replacement by researchers. Many digital circuits have been introduced in QCA technology, most of them aiming to reach the function with optimum construction in terms of area, cell count and power consumption. The memory circuit is the main building block in the digital system therefore the researchers paid attention to design the memory cells with minimum requirements. In this paper, a new methodology is intro-duced to design two forms of CAM cell. The proposed designs required two 2:1 multiplexers, one OR gate and one inverter. The first proposed design reduces the power consumption by 53.3%, 35% and 25.9% at (0.5 Ek, 1 Ek, and 1.5 Ek) while the second design by 53.2%, 31.9% and 20.5% (0.5 Ek, 1 Ek, and 1.5 Ek) respectively.

Kata kunci

Jaringan kolaborasi para penulis

13 penulis · 31 tautan kepenulisan bersama · 4 lintas organisasi

Arahkan kursor atau ketuk sebuah nama untuk menyorot rekan penulisnya. Klik dua kali untuk membuka halaman penulis.

  • Tun Hussein Onn University of Malaysia
  • University of Kufa
  • Organisasi berbeda
  • Organisasi sama
  • Afiliasi tidak diketahui
  • Garis lebih tebal = lebih banyak artikel bersama · lingkaran lebih besar = lebih banyak artikel
Tampilkan sebagai tabel
Rekan penulisOrganisasiArtikel bersama
Nabeel Salih AliUniversity of Kufa1
Othman M. Hussein AnssariUniversity of Kufa1
Naseem AlmudhaffarUniversity of Kufa1
Abbas Nasir AlTaeeUniversity of Kufa1
Muhammad Shukri AhmadTun Hussein Onn University of Malaysia1
Omar Abu HassanTun Hussein Onn University of Malaysia1
Shamsul Aizam ZulkifliTun Hussein Onn University of Malaysia1
Ahmad Alabqari Ma’radziTun Hussein Onn University of Malaysia1
Tengku Nadzlin Tengku IbrahimTun Hussein Onn University of Malaysia1

Afiliasi berasal dari OpenAlex; metadata OAI-PMH jurnal tidak memuatnya. Penulis tanpa ID OpenAlex dicocokkan berdasarkan nama, sehingga dua orang bisa tergabung atau satu orang bisa terpisah.

Sumber metadata: OAI-PMH (metadata jurnal) http://section.iaesonline.com/index.php/IJEEI/oai, pertama di-harvest 8 Nov 2026, terakhir terlihat 8 Nov 2026.
Metadata asli (oai_dc)
<oai_dc:dc xmlns="http://www.openarchives.org/OAI/2.0/" xmlns:dc="http://purl.org/dc/elements/1.1/" xmlns:oai_dc="http://www.openarchives.org/OAI/2.0/oai_dc/" xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance" xsi:schemaLocation="http://www.openarchives.org/OAI/2.0/oai_dc/  http://www.openarchives.org/OAI/2.0/oai_dc.xsd">
	<dc:title xml:lang="en">Design of Power-Efficient Structures of the CAM Cell using a New Approach in QCA Nanoelectronics Technology</dc:title>
	<dc:creator xml:lang="en">Majeed, Ali Hussien</dc:creator>
	<dc:creator xml:lang="en">Abdulelah, Ahmed</dc:creator>
	<dc:creator xml:lang="en">Zainal, Mohd Shamian</dc:creator>
	<dc:creator xml:lang="en">Alkaldy, Esam</dc:creator>
	<dc:subject xml:lang="en">QCA technology</dc:subject>
	<dc:subject xml:lang="en">CAM cell</dc:subject>
	<dc:subject xml:lang="en">Memory circuit</dc:subject>
	<dc:subject xml:lang="en">Nanoelectronics</dc:subject>
	<dc:subject xml:lang="en">QCADesigner</dc:subject>
	<dc:description xml:lang="en">Quantum-dot Cellular Automata (QCA) is a new emerging nano-electronic technology. Owing to its many fa-vorable features such as low energy requirements, high speed, and small size, QCA is being actively suggested as a future CMOS replacement by researchers. Many digital circuits have been introduced in QCA technology, most of them aiming to reach the function with optimum construction in terms of area, cell count and power consumption. The memory circuit is the main building block in the digital system therefore the researchers paid attention to design the memory cells with minimum requirements. In this paper, a new methodology is intro-duced to design two forms of CAM cell. The proposed designs required two 2:1 multiplexers, one OR gate and one inverter. The first proposed design reduces the power consumption by 53.3%, 35% and 25.9% at (0.5 Ek, 1 Ek, and 1.5 Ek) while the second design by 53.2%, 31.9% and 20.5% (0.5 Ek, 1 Ek, and 1.5 Ek) respectively.</dc:description>
	<dc:publisher xml:lang="en">IAES Indonesian Section</dc:publisher>
	<dc:date>2021-05-30</dc:date>
	<dc:type>info:eu-repo/semantics/article</dc:type>
	<dc:type>info:eu-repo/semantics/publishedVersion</dc:type>
	<dc:format>application/pdf</dc:format>
	<dc:identifier>https://section.iaesonline.com/index.php/IJEEI/article/view/2797</dc:identifier>
	<dc:identifier>10.52549/ijeei.v9i2.2797</dc:identifier>
	<dc:source xml:lang="en">Indonesian Journal of Electrical Engineering and Informatics (IJEEI); Vol. 9 No. 2: June 2021; 490-497</dc:source>
	<dc:source>2089-3272</dc:source>
	<dc:source>2089-3272</dc:source>
	<dc:language>en</dc:language>
	<dc:relation>https://section.iaesonline.com/index.php/IJEEI/article/view/2797/626</dc:relation>
</oai_dc:dc>