Pulse width modulation and pulse density modulation are deemed to be main modulation techniques, even PDM could not emulate PWM, in terms of, basically, simplicity. PDM bitstream is encoded through sigma-delta modulation. Since sigma-delta modulation, compared to PWM, needs very high switching frequency and more complicated materials to compose circuits, it’s more difficult to design one. In this article we design a low-power class-D audio amplifier circuit where the analog signal is encoded into pulse density modulation (PDM) using a first-order sigma-delta (ΣΔ) modulator. The designed circuit is built using Orcad-PSpice and results are analyzed with Matlab. A second-order integrator, a voltage divider as a feedback loop are used to mitigate basically, THD and get high efficiency. The audio signal is passed to the EM speaker through a Butterworth low-pass filter. A low THD of less than 0.2 % is obtained comparing to similar circuits in the literature and a high efficiency of 92 % is achieved.
Jaringan kolaborasi para penulis
2 penulis ·
1 tautan kepenulisan bersama
Arahkan kursor atau ketuk sebuah nama untuk menyorot rekan penulisnya. Klik dua kali untuk membuka halaman penulis.
University of Biskra
Organisasi berbeda
Organisasi sama
Afiliasi tidak diketahui
Garis lebih tebal = lebih banyak artikel bersama · lingkaran lebih besar = lebih banyak artikel
Tampilkan sebagai tabel
Rekan penulis
Organisasi
Artikel bersama
Afiliasi berasal dari OpenAlex; metadata OAI-PMH jurnal tidak memuatnya. Penulis tanpa ID OpenAlex dicocokkan berdasarkan nama, sehingga dua orang bisa tergabung atau satu orang bisa terpisah.