Melola Discovery

← Melola Discovery

Akses terbuka Jurnal SINTA 1

UTILIZATION OF CITRIC ACID AS BONDING AGENT IN SEMBILANG BAMBOO (Dendrocalamus giganteus Munro) PARTICLEBOARD PRODUCTION

Indonesian Journal of Forestry Research · Vol. 9 No. 1 (2022) · hlm. 99–120

DOI
10.59465/ijfr.2022.9.1.99-120
ISSN
2406-8195, 2355-7079
Terbit
2022-04-30
Penerbit
Association of Indonesian Forestry and Environment Researchers and Technicians
Bahasa
eng
Lisensi
creativecommons.org/licenses/by-nc-sa/4.0

Abstrak

Citric acid was utilized as a bonding agent in the production of Sembilang bamboo particleboard. The limitation in using bamboo for particleboard production is that the silica content in bamboo skin can accelerate particleboard processing machines' bluntness and reduce particle adherence in particleboard manufacturing. This research aimed to investigate the influence of bamboo skin and citric acid content on the characteristics of Sembilang bamboo particleboard. Particleboards were prepared using bamboo particles (type A) and unskinned bamboo particles (type B). The citric acid solution (59%) was sprayed over the surface of bamboo particles to obtain three different levels of citric acid, i.e., 15, 20, and 25 % (based on bamboo particles’ dry weight). The Sembilang bamboo particleboards were manufactured using a hot-pressing machine at 200°C, 5 MPa for 10 min. The particleboard targeted density was 0.8 g/cm3. The type B particleboards’ internal bond (IB), modulus of rupture (MOR), water absorption (WA), and thickness swelling (TS) were superior compared to the type A particleboards. This was influenced by the lower concentration of silica in type B particleboards, which tend to allow an intimate contact area among particles and citric acid then produced better quality particleboards compared to type A particleboards. The type B particleboards met the obligation of JIS A 5908 for type 18 particleboard in terms of modulus of rupture, modulus of elasticity, and internal bond, however, only fulfilled the type 8 particleboard in terms of screw holding power.

Kata kunci

Jaringan kolaborasi para penulis

28 penulis · 111 tautan kepenulisan bersama · 48 lintas organisasi

Arahkan kursor atau ketuk sebuah nama untuk menyorot rekan penulisnya. Klik dua kali untuk membuka halaman penulis.

  • National Research and Innovation Agency
  • IPB University
  • State University of Semarang
  • Indonesian Institute of Sciences
  • Kyoto University
  • Tanjungpura University
  • Universitas Pattimura
  • Organisasi lain
  • Afiliasi tidak diketahui
  • Organisasi berbeda
  • Organisasi sama
  • Afiliasi tidak diketahui
  • Garis lebih tebal = lebih banyak artikel bersama · lingkaran lebih besar = lebih banyak artikel
Tampilkan sebagai tabel
Rekan penulisOrganisasiArtikel bersama
Muh Yusram MassijayaAfiliasi tidak diketahui3
SuhasmanAfiliasi tidak diketahui2
Dina SetyawatiTanjungpura University2
Naresworo NugrohoIPB University1
Rohny Setiawan MaailUniversitas Pattimura1
Dede HermawanIPB University1
Astuti ArifHasanuddin University1
Niken SubektiState University of Semarang1
Sonika MaulanaState University of Semarang1
Ahmad Naharuddin RamadhanState University of Semarang1
Putri NabilaState University of Semarang1
Ananto NugrohoIndonesian Institute of Sciences1
Iman SatyarnoUniversitas Gadjah Mada1
Yuliati IndrayaniTanjungpura University1
Tsuyoshi YoshimuraKyoto University1

Afiliasi berasal dari OpenAlex; metadata OAI-PMH jurnal tidak memuatnya. Penulis tanpa ID OpenAlex dicocokkan berdasarkan nama, sehingga dua orang bisa tergabung atau satu orang bisa terpisah.

Sumber metadata: OAI-PMH (metadata jurnal) https://ejournal.aptklhi.org/index.php/ijfr/oai, pertama di-harvest 8 Nov 2026, terakhir terlihat 16 Nov 2026.
Metadata asli (oai_dc)
<oai_dc:dc xmlns="http://www.openarchives.org/OAI/2.0/" xmlns:dc="http://purl.org/dc/elements/1.1/" xmlns:oai_dc="http://www.openarchives.org/OAI/2.0/oai_dc/" xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance" xsi:schemaLocation="http://www.openarchives.org/OAI/2.0/oai_dc/  http://www.openarchives.org/OAI/2.0/oai_dc.xsd">
	<dc:title xml:lang="en-US">UTILIZATION OF CITRIC ACID AS BONDING AGENT IN SEMBILANG BAMBOO (Dendrocalamus giganteus Munro) PARTICLEBOARD PRODUCTION</dc:title>
	<dc:creator>A. Syamani, Firda</dc:creator>
	<dc:creator>Z. Arifqi, Agus</dc:creator>
	<dc:creator>S. Munawar, Sasa</dc:creator>
	<dc:creator>Sudarmanto, Sudarmanto</dc:creator>
	<dc:creator>Astari, Lilik</dc:creator>
	<dc:creator>W. Prasetiyo, Kurnia</dc:creator>
	<dc:creator>Gopar, Mohamad</dc:creator>
	<dc:creator>Ismadi, Ismadi</dc:creator>
	<dc:creator>S. Kusumah, Sukma</dc:creator>
	<dc:creator>H. Hussin, Mohd.</dc:creator>
	<dc:creator>Subyakto, Subyakto</dc:creator>
	<dc:creator>S. Hadi, Yusuf</dc:creator>
	<dc:creator>Umemura, Kenji</dc:creator>
	<dc:subject xml:lang="en-US">Sembilang bamboo</dc:subject>
	<dc:subject xml:lang="en-US">particleboards</dc:subject>
	<dc:subject xml:lang="en-US">citric acid</dc:subject>
	<dc:subject xml:lang="en-US">physical properties</dc:subject>
	<dc:subject xml:lang="en-US">mechanical properties</dc:subject>
	<dc:subject xml:lang="en-US">silica</dc:subject>
	<dc:description xml:lang="en-US">Citric acid was utilized as a bonding agent in the production of Sembilang bamboo particleboard. The limitation in using bamboo for particleboard production is that the silica content in bamboo skin can accelerate particleboard processing machines' bluntness and reduce particle adherence in particleboard manufacturing. This research aimed to investigate the influence of bamboo skin and citric acid content on the characteristics of Sembilang bamboo particleboard. Particleboards were prepared using bamboo particles (type A) and unskinned bamboo particles (type B). The citric acid solution (59%) was sprayed over the surface of bamboo particles to obtain three different levels of citric acid, i.e., 15, 20, and 25 % (based on bamboo particles’ dry weight). The Sembilang bamboo particleboards were manufactured using a hot-pressing machine at 200°C, 5 MPa for 10 min. The particleboard targeted density was 0.8 g/cm3. The type B particleboards’ internal bond (IB), modulus of rupture (MOR), water absorption (WA), and thickness swelling (TS) were superior compared to the type A particleboards. This was influenced by the lower concentration of silica in type B particleboards, which tend to allow an intimate contact area among particles and citric acid then produced better quality particleboards compared to type A particleboards. The type B particleboards met the obligation of JIS A 5908 for type 18 particleboard in terms of modulus of rupture, modulus of elasticity, and internal bond, however, only fulfilled the type 8 particleboard in terms of screw holding power.&amp;nbsp;</dc:description>
	<dc:publisher xml:lang="en-US">Association of Indonesian Forestry and Environment Researchers and Technicians</dc:publisher>
	<dc:date>2022-04-30</dc:date>
	<dc:type>info:eu-repo/semantics/article</dc:type>
	<dc:type>info:eu-repo/semantics/publishedVersion</dc:type>
	<dc:format>application/pdf</dc:format>
	<dc:identifier>https://ejournal.aptklhi.org/index.php/ijfr/article/view/30</dc:identifier>
	<dc:identifier>10.59465/ijfr.2022.9.1.99-120</dc:identifier>
	<dc:source xml:lang="en-US">Indonesian Journal of Forestry Research; Vol. 9 No. 1 (2022): Indonesian Journal of Forestry Research; 99-120</dc:source>
	<dc:source>2406-8195</dc:source>
	<dc:source>2355-7079</dc:source>
	<dc:language>eng</dc:language>
	<dc:relation>https://ejournal.aptklhi.org/index.php/ijfr/article/view/30/19</dc:relation>
	<dc:rights xml:lang="en-US">Copyright (c) 2022 IJFR</dc:rights>
	<dc:rights xml:lang="en-US">https://creativecommons.org/licenses/by-nc-sa/4.0</dc:rights>
</oai_dc:dc>