Akses terbuka Jurnal SINTA 1
WORK MEASUREMENT STUDY ON MOTOR-MANUAL PINE TAPPING OPERATION: THE APPLICATION OF THE CONCEPT OF LEAN MANUFACTURING AND ALLOWANCES
Indonesian Journal of Forestry Research · Vol. 8 No. 1 (2021) · hlm. 111–125
- ISSN
- 2406-8195, 2355-7079
- Terbit
- 2021-04-30
- Penerbit
- Association of Indonesian Forestry and Environment Researchers and Technicians
- Bahasa
- eng
Abstrak
Derivated products of pine resin have been recognised as competitive commodities in global trade, increasing the need to use resources more efficiently. A hand-held tapping machine with small hoe-shape cutters called “mujitek” has been widely applied in Indonesia among efforts to answer this challenge. In this study, a series of observed (actual) work time data were measured and analysed, adopting lean manufacturing to calculate the basic and standard time of the work and estimate the work produced on the tapping operation. Work elements were identified based on their contribution to change or transform the product and were categorised as value-added, non-value-added, and special allowance. Quantitative data on the work productivity in the tapping operation can be used as one fundamental data in determining a work plan to establish a continuous improvement process. The variable fatigue allowances taken into account in this study were standing posture, abnormal posture, muscular energy, atmospheric conditions, and noise. This study shows that non-value-added work elements (repairing machines, chatting, and smoking) cause inefficiency in tapping operation. Analysis of added-value work elements proved that this hand-held tapping machine offers a higher (1.7 times) work productivity than conventional hand-held tapping tools. However, since humans have limitations in the physical, physiological, and mental dimensions that limit their ability to carry out work at a certain level, the discovered work productivity level should also be validated with other thresholds, e.g., physical workload and risk perception.
Kata kunci
Jaringan kolaborasi para penulis
28 penulis · 52 tautan kepenulisan bersama · 12 lintas organisasi
Arahkan kursor atau ketuk sebuah nama untuk menyorot rekan penulisnya. Klik dua kali untuk membuka halaman penulis.
- IPB University
- Ehime University
- Dartmouth College
- Universiti Putra Malaysia
- Udayana University
- Universitas Borneo Tarakan
- Papua New Guinea University of Technology
- Afiliasi tidak diketahui
- Organisasi berbeda
- Organisasi sama
- Afiliasi tidak diketahui
- Garis lebih tebal = lebih banyak artikel bersama · lingkaran lebih besar = lebih banyak artikel
Tampilkan sebagai tabel
| Rekan penulis | Organisasi | Artikel bersama |
|---|---|---|
| Dodik Ridho Nurrochmat | IPB University | 3 |
| Yozo Yamada | Ehime University | 2 |
| Chika Annisa Yonanda Kusumadewi | IPB University | 2 |
| Lerfi Marisiana | IPB University | 2 |
| Ika Lestari | Afiliasi tidak diketahui | 1 |
| Budi Kuncahyo | IPB University | 1 |
| David Jhon Daniel | IPB University | 1 |
| Angela M. Rettob | IPB University | 1 |
| Regan Leonardus Kaswanto | IPB University | 1 |
| Muhammad Sidiq | Afiliasi tidak diketahui | 1 |
| James Thomas Erbaugh | Dartmouth College | 1 |
| Oki Hadiyati | IPB University | 1 |
| M F Zaini | IPB University | 1 |
| Widya Prajawati | IPB University | 1 |
| Bahruni Bahruni | IPB University | 1 |
| I Nyoman Adiputra | Udayana University | 1 |
| Seca Gandaseca | Universiti Putra Malaysia | 1 |
| Suryaningsih Suryaningsih | Universitas Borneo Tarakan | 1 |
| K Kasmaliasari | Afiliasi tidak diketahui | 1 |
| B Bahruni | Afiliasi tidak diketahui | 1 |
| Mohammad Faiz Zaini | Afiliasi tidak diketahui | 1 |
| David Lopez Cornelio | Papua New Guinea University of Technology | 1 |
| Jhon Akande | Afiliasi tidak diketahui | 1 |
| Arzyana Sunkar | IPB University | 1 |
| SYAHLAN FALUTHI | IPB University | 1 |
Afiliasi berasal dari OpenAlex; metadata OAI-PMH jurnal tidak memuatnya. Penulis tanpa ID OpenAlex dicocokkan berdasarkan nama, sehingga dua orang bisa tergabung atau satu orang bisa terpisah.