Akses terbuka
Jurnal
SINTA 1
Determination of a Local Hybrid Geoid as a Height Reference System for 3D Cadastre
Indonesian Journal of Geography · Vol. 53 No. 2 (2021) · hlm. 198–205
ISSN 2354-9114, 0024-9521
Terbit 2021-08-28
Penerbit Faculty of Geography, Universitas Gadjah Mada
Bahasa eng
Abstrak
Use and development of vertical building(s) on land parcel(s) have been a common progress to many urban landscapes around the world. 3D cadastre has been a research area that involves legal, technical and institutional assessments to the use and development of vertical buildings. Initial Land Registration of 3D cadastre objects require a representative geometry to determine the legal boundaries of 3D objects. For that purpose, a height reference that is used to define 3D geometries of registered 3D cadastre objects is important. This study focuses in determining a height reference system by developing a local hybrid geoid for the representation of 3D cadastre. The local hybrid geoid was developed by fitting the gravimetric to the geometric geoid. Four strategies were utilized, based on the combination of GGM’s SGG-UGM-1 and GO_CONS_GCF_2_SPW_R5, Remove-Compute-Restore method and control point distribution for geoid fitting. Based on comparison with geometric geoid at six independent control points, the local hybrid geoid from strategy 3 produces mean difference of 0.354 m, accuracy of 0.137 m and increased level of closeness of 86%, which is further applied as an alternative reference surface in 3D cadastre.
Jaringan kolaborasi para penulis
18 penulis ·
38 tautan kepenulisan bersama
· 12 lintas organisasi
Arahkan kursor atau ketuk sebuah nama untuk menyorot rekan penulisnya. Klik dua kali untuk membuka halaman penulis.
Universitas Gadjah Mada Indonesian National Institute of Aeronautics and Space Padjadjaran University Indonesian Institute of Sciences Afiliasi tidak diketahui
Organisasi berbeda
Organisasi sama
Afiliasi tidak diketahui
Garis lebih tebal = lebih banyak artikel bersama · lingkaran lebih besar = lebih banyak artikel
Tampilkan sebagai tabel
Afiliasi berasal dari OpenAlex; metadata OAI-PMH jurnal tidak memuatnya. Penulis tanpa ID OpenAlex dicocokkan berdasarkan nama, sehingga dua orang bisa tergabung atau satu orang bisa terpisah.
Sumber metadata: OAI-PMH (metadata jurnal) http://jurnal.ugm.ac.id/ijg/oai, pertama di-harvest 8 Nov 2026, terakhir terlihat 16 Nov 2026.
Metadata asli (oai_dc)
<oai_dc:dc xmlns="http://www.openarchives.org/OAI/2.0/" xmlns:dc="http://purl.org/dc/elements/1.1/" xmlns:oai_dc="http://www.openarchives.org/OAI/2.0/oai_dc/" xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance" xsi:schemaLocation="http://www.openarchives.org/OAI/2.0/oai_dc/ http://www.openarchives.org/OAI/2.0/oai_dc.xsd">
<dc:title xml:lang="en-US">Determination of a Local Hybrid Geoid as a Height Reference System for 3D Cadastre</dc:title>
<dc:creator>Putraningtyas, Margaretha Elya Lim</dc:creator>
<dc:creator>Heliani, Leni Sophia</dc:creator>
<dc:creator>Widjajanti, Nurrohmat</dc:creator>
<dc:creator>Aditya, Trias</dc:creator>
<dc:subject xml:lang="en-US"></dc:subject>
<dc:subject xml:lang="en-US">height reference system; 3D Cadastre; local hybrid geoid</dc:subject>
<dc:subject xml:lang="en-US"></dc:subject>
<dc:description xml:lang="en-US">Use and development of vertical building(s) on land parcel(s) have been a common progress to many urban landscapes around the world. 3D cadastre has been a research area that involves legal, technical and institutional assessments to the use and development of vertical buildings. Initial Land Registration of 3D cadastre objects require a representative geometry to determine the legal boundaries of 3D objects. For that purpose, a height reference that is used to define 3D geometries of registered 3D cadastre objects is important. This study focuses in determining a height reference system by developing a local hybrid geoid for the representation of 3D cadastre. The local hybrid geoid was developed by fitting the gravimetric to the geometric geoid. Four strategies were utilized, based on the combination of GGM’s SGG-UGM-1 and GO_CONS_GCF_2_SPW_R5, Remove-Compute-Restore method and control point distribution for geoid fitting. Based on comparison with geometric geoid at six independent control points, the local hybrid geoid from strategy 3 produces mean difference of 0.354 m, accuracy of 0.137 m and increased level of closeness of 86%, which is further applied as an alternative reference surface in 3D cadastre. </dc:description>
<dc:publisher xml:lang="en-US">Faculty of Geography, Universitas Gadjah Mada</dc:publisher>
<dc:contributor xml:lang="en-US"></dc:contributor>
<dc:date>2021-08-28</dc:date>
<dc:type>info:eu-repo/semantics/article</dc:type>
<dc:type>info:eu-repo/semantics/publishedVersion</dc:type>
<dc:type xml:lang="en-US">Peer-reviewed Article</dc:type>
<dc:type xml:lang="en-US"></dc:type>
<dc:format>application/pdf</dc:format>
<dc:identifier>https://journal.ugm.ac.id/ijg/article/view/55219</dc:identifier>
<dc:identifier>10.22146/ijg.55219</dc:identifier>
<dc:source xml:lang="en-US">Indonesian Journal of Geography; Vol 53, No 2 (2021): Indonesian Journal of Geography; 198-205</dc:source>
<dc:source>2354-9114</dc:source>
<dc:source>0024-9521</dc:source>
<dc:language>eng</dc:language>
<dc:relation>https://journal.ugm.ac.id/ijg/article/view/55219/pdf</dc:relation>
<dc:relation>https://journal.ugm.ac.id/ijg/article/downloadSuppFile/55219/11601</dc:relation>
<dc:relation>https://journal.ugm.ac.id/ijg/article/downloadSuppFile/55219/11602</dc:relation>
<dc:coverage xml:lang="en-US"></dc:coverage>
<dc:coverage xml:lang="en-US"></dc:coverage>
<dc:coverage xml:lang="en-US"></dc:coverage>
<dc:rights xml:lang="en-US">Copyright (c) 2021 Authors</dc:rights>
<dc:rights xml:lang="en-US">http://creativecommons.org/licenses/by-nc/4.0</dc:rights>
</oai_dc:dc>
Sitasi dan pengindeksan
OpenAlex
Terindeks
lewat DOI
1 sitasi
Crossref
Tidak ditemukan
Jumlah menurut tiap indeks pada 13 Nov 2026; setiap indeks menghitung sitasi dengan cara berbeda.
Sitasi artikel ini
APA 7
Putraningtyas, M. E. L., Heliani, L. S., Widjajanti, N., & Aditya, T. (2021). Determination of a Local Hybrid Geoid as a Height Reference System for 3D Cadastre. Indonesian Journal of Geography, 53(2), 198–205. https://doi.org/10.22146/ijg.55219
Salin
IEEE
M. E. L. Putraningtyas, L. S. Heliani, N. Widjajanti, and T. Aditya, “Determination of a Local Hybrid Geoid as a Height Reference System for 3D Cadastre,” Indonesian Journal of Geography, vol. 53, no. 2, pp. 198–205, 2021, doi: 10.22146/ijg.55219.
Salin
Dibuat dari metadata jurnal; periksa nama penulis sebelum dipakai.