Melola Discovery

← Melola Discovery

Akses terbuka Jurnal SINTA 1

Mechanical and thermal properties of recycled polypropylene bamboo fibre-reinforced composites

International Journal of Advances in Applied Sciences · Vol. 12 No. 3 (2023) · hlm. 205–213

DOI
10.11591/ijaas.v12.i3.pp205-213
ISSN
2722-2594, 2252-8814
Terbit
2023-09-01
Penerbit
Institute of Advanced Engineering and Science
Bahasa
eng
Lisensi
creativecommons.org/licenses/by-sa/4.0

Abstrak

In this article, a kind of green composite was prepared from recycled polypropylene (r-PP) which was further reinforced with various loadings of chemically modified bamboo fibres. Effects of bamboo fibre loading on the mechanical and thermal properties of r-PP/bamboo composites were studied. Those properties were characterized by tensile testing, impact testing, thermogravimetric analysis (TGA), and differential scanning calorimeter (DSC). Standardized test specimens with 0%, 10%, 20%, and 30% mass fractions of bamboo fibre were obtained by an extrusion process which was then finalized on injection molding. The experiment revealed the tensile strength and strain of the composite become greater with the increase of bamboo fraction in the ultimate value of 20% mass fraction. The composite with 10% bamboo fibre loading recorded the highest value of impact strength. Meanwhile, it was evident that the presence of bamboo fibre decreased the thermal stability of recycled polypropylene materials. Therefore, this composite material may find good potential for semi-structural loading applications in relatively low-exposure working.

Jaringan kolaborasi para penulis

13 penulis · 27 tautan kepenulisan bersama · 5 lintas organisasi

Arahkan kursor atau ketuk sebuah nama untuk menyorot rekan penulisnya. Klik dua kali untuk membuka halaman penulis.

  • Sebelas Maret University
  • University of Palangka Raya
  • Politeknik Negeri Balikpapan
  • Yogyakarta State University
  • Afiliasi tidak diketahui
  • Organisasi berbeda
  • Organisasi sama
  • Afiliasi tidak diketahui
  • Garis lebih tebal = lebih banyak artikel bersama · lingkaran lebih besar = lebih banyak artikel
Tampilkan sebagai tabel
Rekan penulisOrganisasiArtikel bersama
Slamet JatmikoSebelas Maret University2
Arif Bagus PANUNTUNSebelas Maret University2
Suharno SuharnoSebelas Maret University1
Sarjoko SarjokoUniversity of Palangka Raya1
Budi Tri CahyonoAfiliasi tidak diketahui1
Ibnu SiswantoYogyakarta State University1
Tuatul MahfudPoliteknik Negeri Balikpapan1
Putu Fajar PuspitasariAfiliasi tidak diketahui1

Afiliasi berasal dari OpenAlex; metadata OAI-PMH jurnal tidak memuatnya. Penulis tanpa ID OpenAlex dicocokkan berdasarkan nama, sehingga dua orang bisa tergabung atau satu orang bisa terpisah.

Sumber metadata: OAI-PMH (metadata jurnal) http://ijaas.iaescore.com/index.php/IJAAS/oai, pertama di-harvest 8 Nov 2026, terakhir terlihat 16 Nov 2026.
Metadata asli (oai_dc)
<oai_dc:dc xmlns="http://www.openarchives.org/OAI/2.0/" xmlns:dc="http://purl.org/dc/elements/1.1/" xmlns:oai_dc="http://www.openarchives.org/OAI/2.0/oai_dc/" xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance" xsi:schemaLocation="http://www.openarchives.org/OAI/2.0/oai_dc/  http://www.openarchives.org/OAI/2.0/oai_dc.xsd">
	<dc:title xml:lang="en-US">Mechanical and thermal properties of recycled polypropylene bamboo fibre-reinforced composites</dc:title>
	<dc:creator>Widiastuti, Indah</dc:creator>
	<dc:creator>Pratama, Devan Hidayat</dc:creator>
	<dc:creator>Hakim, Mohamad Lukmanul</dc:creator>
	<dc:creator>Wijayanto, Danar Susilo</dc:creator>
	<dc:creator>Harjanto, Budi</dc:creator>
	<dc:description xml:lang="en-US">In this article, a kind of green composite was prepared from recycled polypropylene (r-PP) which was further reinforced with various loadings of chemically modified bamboo fibres. Effects of bamboo fibre loading on the mechanical and thermal properties of r-PP/bamboo composites were studied. Those properties were characterized by tensile testing, impact testing, thermogravimetric analysis (TGA), and differential scanning calorimeter (DSC). Standardized test specimens with 0%, 10%, 20%, and 30% mass fractions of bamboo fibre were obtained by an extrusion process which was then finalized on injection molding. The experiment revealed the tensile strength and strain of the composite become greater with the increase of bamboo fraction in the ultimate value of 20% mass fraction. The composite with 10% bamboo fibre loading recorded the highest value of impact strength. Meanwhile, it was evident that the presence of bamboo fibre decreased the thermal stability of recycled polypropylene materials. Therefore, this composite material may find good potential for semi-structural loading applications in relatively low-exposure working.</dc:description>
	<dc:publisher xml:lang="en-US">Institute of Advanced Engineering and Science</dc:publisher>
	<dc:contributor xml:lang="en-US"></dc:contributor>
	<dc:date>2023-09-01</dc:date>
	<dc:type>info:eu-repo/semantics/article</dc:type>
	<dc:type>info:eu-repo/semantics/publishedVersion</dc:type>
	<dc:type xml:lang="en-US"></dc:type>
	<dc:format>application/pdf</dc:format>
	<dc:identifier>https://ijaas.iaescore.com/index.php/IJAAS/article/view/20750</dc:identifier>
	<dc:identifier>10.11591/ijaas.v12.i3.pp205-213</dc:identifier>
	<dc:source xml:lang="en-US">International Journal of Advances in Applied Sciences; Vol 12, No 3: September 2023; 205-213</dc:source>
	<dc:source>2722-2594</dc:source>
	<dc:source>2252-8814</dc:source>
	<dc:source>10.11591/ijaas.v12.i3</dc:source>
	<dc:language>eng</dc:language>
	<dc:relation>https://ijaas.iaescore.com/index.php/IJAAS/article/view/20750/13040</dc:relation>
	<dc:rights xml:lang="en-US">Copyright (c) 2023 Institute of Advanced Engineering and Science (IAES)</dc:rights>
	<dc:rights xml:lang="en-US">http://creativecommons.org/licenses/by-sa/4.0</dc:rights>
</oai_dc:dc>