Melola Discovery

← Melola Discovery

Akses terbuka Jurnal SINTA 1

Design of A New Three Phase Hybrid H-bridge and H-Type FCMLI for Various PWM Strategies

International Journal of Advances in Applied Sciences · Vol. 4 No. 3 (2015) · hlm. 82–89

DOI
10.11591/ijaas.v4.i3.pp82-89
ISSN
2722-2594, 2252-8814
Terbit
2015-09-01
Penerbit
Institute of Advanced Engineering and Science
Bahasa
eng
Lisensi
creativecommons.org/licenses/by-sa/4.0

Abstrak

The inverters have to be designed to obtain a quality output voltage or a current waveform with a minimum amount of ripple content. In high power and high voltage applications the conventional two level inverters, however, have some limitations in operating at high frequency mainly due to switching losses and constraints of the power device ratings. Series and parallel combination of power switches in order to achieve the power handling voltages and currents. The conventional two level inverters produce THD levels around 60% even under normal operating conditions which are undesirable and cause more losses and other power quality problems too on the AC drives and utilities. Nowadays, multilevel inverters are widely used in power industry. Voltage unbalance problem is one of the major issues in working of multilevel inverter. In this paper, a three phase H-bridge + H-type FCMLI using sinusoidal reference, third harmonic injection reference, 60 degree reference and stepped wave reference are initially developed using SIMULINK and then implemented in real time environment using dSPACE. The five level output voltages of the chosen MLIs obtained using the MATLAB and dSPACE based PWM strategies and the corresponding % THD, VRMS (fundamental), CF and FF are presented and analyzed. It is observed that bipolar COPWM-C provides output with relatively low distortion for sine reference and bipolar COPWM-B strategy is found to perform better since it provides relatively higher fundamental RMS output voltage for 60 degree reference.

Jaringan kolaborasi para penulis

18 penulis · 29 tautan kepenulisan bersama · 7 lintas organisasi

Arahkan kursor atau ketuk sebuah nama untuk menyorot rekan penulisnya. Klik dua kali untuk membuka halaman penulis.

  • Annamalai University
  • Karpagam Academy of Higher Education
  • Afiliasi tidak diketahui
  • Organisasi berbeda
  • Organisasi sama
  • Afiliasi tidak diketahui
  • Garis lebih tebal = lebih banyak artikel bersama · lingkaran lebih besar = lebih banyak artikel
Tampilkan sebagai tabel
Rekan penulisOrganisasiArtikel bersama
B. ShanthiAnnamalai University5
Ponnusamy VijayakumarKarpagam Academy of Higher Education2
Ramaiyan BensrajAnnamalai University2
T.S. AnandhiAnnamalai University2
T. SengolrajanKarpagam Academy of Higher Education1
A.N. AbiramiAfiliasi tidak diketahui1
D. MeenaAfiliasi tidak diketahui1
K. VijayalakshmiKarpagam Academy of Higher Education1
K. MuthukumarAnnamalai University1
D. VenkatasubramanianAnnamalai University1
Rajamanickam PazhanimuruganAnnamalai University1
S. M. RevathyAfiliasi tidak diketahui1
K. Ramash KumarKarpagam Academy of Higher Education1
Arvind ThirumalaiKarpagam Academy of Higher Education1

Afiliasi berasal dari OpenAlex; metadata OAI-PMH jurnal tidak memuatnya. Penulis tanpa ID OpenAlex dicocokkan berdasarkan nama, sehingga dua orang bisa tergabung atau satu orang bisa terpisah.

Sumber metadata: OAI-PMH (metadata jurnal) http://ijaas.iaescore.com/index.php/IJAAS/oai, pertama di-harvest 8 Nov 2026, terakhir terlihat 16 Nov 2026.
Metadata asli (oai_dc)
<oai_dc:dc xmlns="http://www.openarchives.org/OAI/2.0/" xmlns:dc="http://purl.org/dc/elements/1.1/" xmlns:oai_dc="http://www.openarchives.org/OAI/2.0/oai_dc/" xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance" xsi:schemaLocation="http://www.openarchives.org/OAI/2.0/oai_dc/  http://www.openarchives.org/OAI/2.0/oai_dc.xsd">
	<dc:title xml:lang="en-US">Design of A New Three Phase Hybrid H-bridge and H-Type FCMLI for Various PWM Strategies</dc:title>
	<dc:creator>Balamurugan, Chinnapettai Ramalingam</dc:creator>
	<dc:creator>Natarajan, S.P.</dc:creator>
	<dc:creator>Padmathilagam, V.</dc:creator>
	<dc:creator>Anandhi, T.S.</dc:creator>
	<dc:description xml:lang="en-US">The inverters have to be designed to obtain a quality output voltage or a current waveform with a minimum amount of ripple content. In high power and high voltage applications the conventional two level inverters, however, have some limitations in operating at high frequency mainly due to switching losses and constraints of the power device ratings. Series and parallel combination of power switches in order to achieve the power handling voltages and currents. The conventional two level inverters produce THD levels around 60% even under normal operating conditions which are undesirable and cause more losses and other power quality problems too on the AC drives and utilities. Nowadays, multilevel inverters are widely used in power industry. Voltage unbalance problem is one of the major issues in working of multilevel inverter. In this paper, a three phase H-bridge + H-type FCMLI using sinusoidal reference, third harmonic injection reference, 60 degree reference and stepped wave reference are initially developed using SIMULINK and then implemented in real time environment using dSPACE. The five level output voltages of the chosen MLIs obtained using the MATLAB and dSPACE based PWM strategies and the corresponding % THD, VRMS (fundamental) , CF and FF are presented and analyzed. It is observed that bipolar COPWM-C provides output with relatively low distortion for sine reference and bipolar COPWM-B strategy is found to perform better since it provides relatively higher fundamental RMS output voltage for 60 degree reference.</dc:description>
	<dc:publisher xml:lang="en-US">Institute of Advanced Engineering and Science</dc:publisher>
	<dc:date>2015-09-01</dc:date>
	<dc:type>info:eu-repo/semantics/article</dc:type>
	<dc:type>info:eu-repo/semantics/publishedVersion</dc:type>
	<dc:type xml:lang="en-US"></dc:type>
	<dc:format>application/pdf</dc:format>
	<dc:identifier>https://ijaas.iaescore.com/index.php/IJAAS/article/view/863</dc:identifier>
	<dc:identifier>10.11591/ijaas.v4.i3.pp82-89</dc:identifier>
	<dc:source xml:lang="en-US">International Journal of Advances in Applied Sciences; Vol 4, No 3: September 2015; 82-89</dc:source>
	<dc:source>2722-2594</dc:source>
	<dc:source>2252-8814</dc:source>
	<dc:source>10.11591/ijaas.v4.i3</dc:source>
	<dc:language>eng</dc:language>
	<dc:relation>https://ijaas.iaescore.com/index.php/IJAAS/article/view/863/5795</dc:relation>
	<dc:rights xml:lang="en-US">Copyright (c) 2015 Chinnapettai Ramalingam Balamurugan, S.P. Natarajan, V. Padmathilagam, T.S. Anandhi</dc:rights>
	<dc:rights xml:lang="en-US">http://creativecommons.org/licenses/by-sa/4.0</dc:rights>
</oai_dc:dc>