Melola Discovery

← Melola Discovery

Akses terbuka Jurnal SINTA 1

Characterization fine grained low alloy steel 22 NiMoCr 3 7 by magnetic Barkhausen noise analysis

International Journal of Advances in Applied Sciences · Vol. 14 No. 1 (2025) · hlm. 209–217

DOI
10.11591/ijaas.v14.i1.pp209-217
ISSN
2722-2594, 2252-8814
Terbit
2025-03-01
Penerbit
Institute of Advanced Engineering and Science
Bahasa
eng
Lisensi
creativecommons.org/licenses/by-sa/4.0

Abstrak

To ensure the quality of mass-produced products, non-destructive material testing (NDT) is required with a method that has high testing speed and accuracy. Products that have undergone heat treatment such as automotive components to obtain a specific hardness value need to be tested to ensure the desired quality. Some parameters such as coercivity and permeability of the ferromagnetic materials, can be used to characterize the shape of the hysteresis curve. The hysteresis curve geometry is related to mechanical hardness, hot working record, and the presence of residual stresses. This paper will present how the coercivity value measurement can be done using the Barkhausen effect, as well as a study of the correlation between the coercivity value and the hardness of a ferromagnetic material using the regression analysis method. Indentation testing has also been done to verify different approaches to obtain hardness value by Barkhausen noise analysis. The research shows that this technique was sufficiently accurate with superior rapid testing and no indentation mark.

Jaringan kolaborasi para penulis

7 penulis · 21 tautan kepenulisan bersama

Arahkan kursor atau ketuk sebuah nama untuk menyorot rekan penulisnya. Klik dua kali untuk membuka halaman penulis.

  • National Research and Innovation Agency
  • Afiliasi tidak diketahui
  • Organisasi berbeda
  • Organisasi sama
  • Afiliasi tidak diketahui
  • Garis lebih tebal = lebih banyak artikel bersama · lingkaran lebih besar = lebih banyak artikel
Tampilkan sebagai tabel
Rekan penulisOrganisasiArtikel bersama

Afiliasi berasal dari OpenAlex; metadata OAI-PMH jurnal tidak memuatnya. Penulis tanpa ID OpenAlex dicocokkan berdasarkan nama, sehingga dua orang bisa tergabung atau satu orang bisa terpisah.

Sumber metadata: OAI-PMH (metadata jurnal) http://ijaas.iaescore.com/index.php/IJAAS/oai, pertama di-harvest 8 Nov 2026, terakhir terlihat 8 Nov 2026.
Metadata asli (oai_dc)
<oai_dc:dc xmlns="http://www.openarchives.org/OAI/2.0/" xmlns:dc="http://purl.org/dc/elements/1.1/" xmlns:oai_dc="http://www.openarchives.org/OAI/2.0/oai_dc/" xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance" xsi:schemaLocation="http://www.openarchives.org/OAI/2.0/oai_dc/  http://www.openarchives.org/OAI/2.0/oai_dc.xsd">
	<dc:title xml:lang="en-US">Characterization fine grained low alloy steel 22 NiMoCr 3 7 by magnetic Barkhausen noise analysis</dc:title>
	<dc:creator>Isnan, May</dc:creator>
	<dc:creator>Kusuma, Gilang Cempaka</dc:creator>
	<dc:creator>Hamdani, Hamdani</dc:creator>
	<dc:creator>Sudasri, Imam</dc:creator>
	<dc:creator>Kurnia, Asep</dc:creator>
	<dc:creator>Rafi, Hanif Muzhaffar</dc:creator>
	<dc:creator>Putra, Andhika</dc:creator>
	<dc:description xml:lang="en-US">To ensure the quality of mass-produced products, non-destructive material testing (NDT) is required with a method that has high testing speed and accuracy. Products that have undergone heat treatment such as automotive components to obtain a specific hardness value need to be tested to ensure the desired quality. Some parameters such as coercivity and permeability of the ferromagnetic materials, can be used to characterize the shape of the hysteresis curve. The hysteresis curve geometry is related to mechanical hardness, hot working record, and the presence of residual stresses. This paper will present how the coercivity value measurement can be done using the Barkhausen effect, as well as a study of the correlation between the coercivity value and the hardness of a ferromagnetic material using the regression analysis method. Indentation testing has also been done to verify different approaches to obtain hardness value by Barkhausen noise analysis. The research shows that this technique was sufficiently accurate with superior rapid testing and no indentation mark.</dc:description>
	<dc:publisher xml:lang="en-US">Institute of Advanced Engineering and Science</dc:publisher>
	<dc:contributor xml:lang="en-US">National Research and Inovation Agency Republic of Indonesia</dc:contributor>
	<dc:date>2025-03-01</dc:date>
	<dc:type>info:eu-repo/semantics/article</dc:type>
	<dc:type>info:eu-repo/semantics/publishedVersion</dc:type>
	<dc:type xml:lang="en-US"></dc:type>
	<dc:format>application/pdf</dc:format>
	<dc:identifier>https://ijaas.iaescore.com/index.php/IJAAS/article/view/21378</dc:identifier>
	<dc:identifier>10.11591/ijaas.v14.i1.pp209-217</dc:identifier>
	<dc:source xml:lang="en-US">International Journal of Advances in Applied Sciences; Vol 14, No 1: March 2025; 209-217</dc:source>
	<dc:source>2722-2594</dc:source>
	<dc:source>2252-8814</dc:source>
	<dc:source>10.11591/ijaas.v14.i1</dc:source>
	<dc:language>eng</dc:language>
	<dc:relation>https://ijaas.iaescore.com/index.php/IJAAS/article/view/21378/13240</dc:relation>
	<dc:rights xml:lang="en-US">Copyright (c) 2025 Institute of Advanced Engineering and Science (IAES)</dc:rights>
	<dc:rights xml:lang="en-US">http://creativecommons.org/licenses/by-sa/4.0</dc:rights>
</oai_dc:dc>