Melola Discovery

← Melola Discovery

Akses terbuka Jurnal SINTA 1

Identification of a Non-Linear System Using Volterra Series Model with Calculated Kernels by Legendre Orthogonal Function

International Journal of Advances in Applied Sciences · Vol. 6 No. 3 (2017) · hlm. 185–192

DOI
10.11591/ijaas.v6.i3.pp185-192
ISSN
2722-2594, 2252-8814
Terbit
2017-09-01
Penerbit
Institute of Advanced Engineering and Science
Bahasa
eng
Lisensi
creativecommons.org/licenses/by-sa/4.0

Abstrak

Modeling and identification of non-linear systems have gained lots of attentions especially in industrial processes. Most of the actual systems have non-linear behavior and the first and simplest solution in modeling such systems is to linearize them which in most cases the result of linearization is not satisfactory. In this paper, modeling of non-linear systems is investigated using Volterra series model based on Legendre orthogonal function. Expansion of Volterra series kernels by Legendre orthogonal functions causes a reduction in the number of model parameters; hence, complexity of calculations would be decreased. Besides, if the free parameter is selected properly in these orthogonal functions, error is reduced and convergence speed of parameters is increased which leads to an increase in identification accuracy. In this paper, identification of non-linear system is presented with Volterra series expanded by Legendre function and PSO algorithm is used to calculate the optimum free parameters of Legendre function. Finally, in order to validate the efficacy and accuracy, the proposed algorithm is implemented on a non-linear system i.e. heat exchanger with actual data

Jaringan kolaborasi para penulis

6 penulis · 11 tautan kepenulisan bersama · 9 lintas organisasi

Arahkan kursor atau ketuk sebuah nama untuk menyorot rekan penulisnya. Klik dua kali untuk membuka halaman penulis.

  • Islamic Azad University, Aliabad Katoul
  • Islamic Azad University, Tehran
  • University of Technology Malaysia
  • Universitas Ahmad Dahlan
  • Organisasi berbeda
  • Organisasi sama
  • Afiliasi tidak diketahui
  • Garis lebih tebal = lebih banyak artikel bersama · lingkaran lebih besar = lebih banyak artikel
Tampilkan sebagai tabel
Rekan penulisOrganisasiArtikel bersama
Tole SutiknoUniversitas Ahmad Dahlan1
Mohammad JannatiUniversity of Technology Malaysia1
Maryam NaghaviIslamic Azad University, Tehran1
Reza EbrahimiIslamic Azad University, Tehran1

Afiliasi berasal dari OpenAlex; metadata OAI-PMH jurnal tidak memuatnya. Penulis tanpa ID OpenAlex dicocokkan berdasarkan nama, sehingga dua orang bisa tergabung atau satu orang bisa terpisah.

Sumber metadata: OAI-PMH (metadata jurnal) http://ijaas.iaescore.com/index.php/IJAAS/oai, pertama di-harvest 8 Nov 2026, terakhir terlihat 16 Nov 2026.
Metadata asli (oai_dc)
<oai_dc:dc xmlns="http://www.openarchives.org/OAI/2.0/" xmlns:dc="http://purl.org/dc/elements/1.1/" xmlns:oai_dc="http://www.openarchives.org/OAI/2.0/oai_dc/" xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance" xsi:schemaLocation="http://www.openarchives.org/OAI/2.0/oai_dc/  http://www.openarchives.org/OAI/2.0/oai_dc.xsd">
	<dc:title xml:lang="en-US">Identification of a Non-Linear System Using Volterra Series Model with Calculated Kernels by Legendre Orthogonal Function</dc:title>
	<dc:creator>Mossadegh, Vahid</dc:creator>
	<dc:creator>Ghanbari, Mahmood</dc:creator>
	<dc:description xml:lang="en-US">Modeling and identification of non-linear systems have gained lots of attentions especially in industrial processes. Most of the actual systems have non-linear behavior and the first and simplest solution in modeling such systems is to linearize them which in most cases the result of linearization is not satisfactory. In this paper, modeling of non-linear systems is investigated using Volterra series model based on Legendre orthogonal function. Expansion of Volterra series kernels by Legendre orthogonal functions causes a reduction in the number of model parameters; hence, complexity of calculations would be decreased. Besides, if the free parameter is selected properly in these orthogonal functions, error is reduced and convergence speed of parameters is increased which leads to an increase in identification accuracy. In this paper, identification of non-linear system is presented with Volterra series expanded by Legendre function and PSO algorithm is used to calculate the optimum free parameters of Legendre function. Finally, in order to validate the efficacy and accuracy, the proposed algorithm is implemented on a non-linear system i.e. heat exchanger with actual data</dc:description>
	<dc:publisher xml:lang="en-US">Institute of Advanced Engineering and Science</dc:publisher>
	<dc:contributor xml:lang="en-US"></dc:contributor>
	<dc:date>2017-09-01</dc:date>
	<dc:type>info:eu-repo/semantics/article</dc:type>
	<dc:type>info:eu-repo/semantics/publishedVersion</dc:type>
	<dc:type xml:lang="en-US"></dc:type>
	<dc:format>application/pdf</dc:format>
	<dc:identifier>https://ijaas.iaescore.com/index.php/IJAAS/article/view/8781</dc:identifier>
	<dc:identifier>10.11591/ijaas.v6.i3.pp185-192</dc:identifier>
	<dc:source xml:lang="en-US">International Journal of Advances in Applied Sciences; Vol 6, No 3: September 2017; 185-192</dc:source>
	<dc:source>2722-2594</dc:source>
	<dc:source>2252-8814</dc:source>
	<dc:source>10.11591/ijaas.v6.i3</dc:source>
	<dc:language>eng</dc:language>
	<dc:relation>https://ijaas.iaescore.com/index.php/IJAAS/article/view/8781/7830</dc:relation>
	<dc:rights xml:lang="en-US">Copyright (c) 2017 Vahid Mossadegh, Mahmood Ghanbari</dc:rights>
	<dc:rights xml:lang="en-US">http://creativecommons.org/licenses/by-sa/4.0</dc:rights>
</oai_dc:dc>