Melola Discovery

← Melola Discovery

Akses terbuka Jurnal SINTA 1

Experimental studies on bagasse ash reinforced with GF and BF-slag in direction towards sustainable development

International Journal of Advances in Applied Sciences · Vol. 13 No. 3 (2024) · hlm. 579–590

DOI
10.11591/ijaas.v13.i3.pp579-590
ISSN
2722-2594, 2252-8814
Terbit
2024-09-01
Penerbit
Institute of Advanced Engineering and Science
Bahasa
eng
Lisensi
creativecommons.org/licenses/by-sa/4.0

Abstrak

To assess the appropriateness of the current by-product for application in building construction and to mitigate potential environmental risks in the context of environmental sustainability, a series of tests were conducted to determine the compressive strength properties of a material composed of glass fiber (GF) strengthened sugar cane bagasse ash (SCA). This material was made from SCA, blast furnace slag (BF-slag), and GF binding with cement. Cylinders were employed to measure the compressive strength of a mixture consisting of water and an SCA ratio of 50%. Cylindrical samples of 150 millimeters in length and 75 millimeters in diameter were utilized to evaluate the compressive strength across curing durations of 7, 14, and 28 days. The present study attempt utilizes mixture ratio percent of 0.15, 0.3, 0.45, 0.6, and 0.75 to perform compressive strength tests. The compressive strength of cylindrical samples ranges from 86.5-801.6 kPa. The density of a cylindrical sample containing 30% cement dropped from 900.1-865 kg/m3. The initial tangent stiffness of the sample ranges from 66-630 MPa. The findings suggest that it is possible to achieve a material with acceptable strength by using SCA ash in combination with BF-slag, strengthened with GF.

Jaringan kolaborasi para penulis

5 penulis · 10 tautan kepenulisan bersama · 1 lintas organisasi

Arahkan kursor atau ketuk sebuah nama untuk menyorot rekan penulisnya. Klik dua kali untuk membuka halaman penulis.

  • Yeshwantrao Chavan College of Engineering
  • Datta Meghe Institute of Higher Education and Research
  • Afiliasi tidak diketahui
  • Organisasi berbeda
  • Organisasi sama
  • Afiliasi tidak diketahui
  • Garis lebih tebal = lebih banyak artikel bersama · lingkaran lebih besar = lebih banyak artikel
Tampilkan sebagai tabel
Rekan penulisOrganisasiArtikel bersama

Afiliasi berasal dari OpenAlex; metadata OAI-PMH jurnal tidak memuatnya. Penulis tanpa ID OpenAlex dicocokkan berdasarkan nama, sehingga dua orang bisa tergabung atau satu orang bisa terpisah.

Sumber metadata: OAI-PMH (metadata jurnal) http://ijaas.iaescore.com/index.php/IJAAS/oai, pertama di-harvest 8 Nov 2026, terakhir terlihat 16 Nov 2026.
Metadata asli (oai_dc)
<oai_dc:dc xmlns="http://www.openarchives.org/OAI/2.0/" xmlns:dc="http://purl.org/dc/elements/1.1/" xmlns:oai_dc="http://www.openarchives.org/OAI/2.0/oai_dc/" xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance" xsi:schemaLocation="http://www.openarchives.org/OAI/2.0/oai_dc/  http://www.openarchives.org/OAI/2.0/oai_dc.xsd">
	<dc:title xml:lang="en-US">Experimental studies on bagasse ash reinforced with GF and BF-slag in direction towards sustainable development</dc:title>
	<dc:creator>Nikhade, Harshal Ramesh</dc:creator>
	<dc:creator>Nikhade, Anshul Ramesh</dc:creator>
	<dc:creator>Telrandhe, Shital</dc:creator>
	<dc:creator>Mandavgade, Nitin K</dc:creator>
	<dc:creator>Hatwar, Bhushan Yograj</dc:creator>
	<dc:description xml:lang="en-US">To assess the appropriateness of the current by-product for application in building construction and to mitigate potential environmental risks in the context of environmental sustainability, a series of tests were conducted to determine the compressive strength properties of a material composed of glass fiber (GF) strengthened sugar cane bagasse ash (SCA). This material was made from SCA, blast furnace slag (BF-slag), and GF binding with cement. Cylinders were employed to measure the compressive strength of a mixture consisting of water and an SCA ratio of 50%. Cylindrical samples of 150 millimeters in length and 75 millimeters in diameter were utilized to evaluate the compressive strength across curing durations of 7, 14, and 28 days. The present study attempt utilizes mixture ratio percent of 0.15, 0.3, 0.45, 0.6, and 0.75 to perform compressive strength tests. The compressive strength of cylindrical samples ranges from 86.5-801.6 kPa. The density of a cylindrical sample containing 30% cement dropped from 900.1-865 kg/m3. The initial tangent stiffness of the sample ranges from 66-630 MPa. The findings suggest that it is possible to achieve a material with acceptable strength by using SCA ash in combination with BF-slag, strengthened with GF.</dc:description>
	<dc:publisher xml:lang="en-US">Institute of Advanced Engineering and Science</dc:publisher>
	<dc:contributor xml:lang="en-US">nil</dc:contributor>
	<dc:date>2024-09-01</dc:date>
	<dc:type>info:eu-repo/semantics/article</dc:type>
	<dc:type>info:eu-repo/semantics/publishedVersion</dc:type>
	<dc:type xml:lang="en-US"></dc:type>
	<dc:format>application/pdf</dc:format>
	<dc:identifier>https://ijaas.iaescore.com/index.php/IJAAS/article/view/21054</dc:identifier>
	<dc:identifier>10.11591/ijaas.v13.i3.pp579-590</dc:identifier>
	<dc:source xml:lang="en-US">International Journal of Advances in Applied Sciences; Vol 13, No 3: September 2024; 579-590</dc:source>
	<dc:source>2722-2594</dc:source>
	<dc:source>2252-8814</dc:source>
	<dc:source>10.11591/ijaas.v13.i3</dc:source>
	<dc:language>eng</dc:language>
	<dc:relation>https://ijaas.iaescore.com/index.php/IJAAS/article/view/21054/13143</dc:relation>
	<dc:rights xml:lang="en-US">Copyright (c) 2024 Institute of Advanced Engineering and Science (IAES)</dc:rights>
	<dc:rights xml:lang="en-US">http://creativecommons.org/licenses/by-sa/4.0</dc:rights>
</oai_dc:dc>