Melola Discovery

← Melola Discovery

Akses terbuka Jurnal SINTA 1

Physical Properties and Compressive Strength of Zinc Oxide Nanopowder as a Potential Dental Amalgam Material

International Journal of Advances in Applied Sciences · Vol. 7 No. 2 (2018) · hlm. 97–101

DOI
10.11591/ijaas.v7.i2.pp97-101
ISSN
2722-2594, 2252-8814
Terbit
2018-06-01
Penerbit
Institute of Advanced Engineering and Science
Bahasa
eng
Lisensi
creativecommons.org/licenses/by-sa/4.0

Abstrak

In this study, the application of nanotechnology was applied in the dentistry field, especially in the innovation of dental amalgam material. To date, mercury (Hg) has been used widely as dental amalgam material with consideration of the cheap price, ease of use, and good mechanical strength. However, last few years, many problems have been faced in the dentistry field due to the use of mercury. Hence, new material is needed as an innovation to eliminate the mercury from dental amalgam composition. This research was conducted to analyze the physical properties and compressive strength of zinc oxide (ZnO) nanopowder as a potential dental amalgam material. The physical properties such as morphology and dimensions were analyzed by SEM and XRD. Further, the compression test was conducted by using hydraulic press machine. The results showed that the ZnO nanopowder analyzed has the particle size of 14.34 nm with the morphology classified as nanorods type. On the compression load of 500 kg, the average of ZnO green density is 3.170 g/cm3. This value experienced the increase of 4.763% when the load was set to 1000 kg, and 7.539% at 2000 kg. The dwelling time also took the same effect. At 30 seconds, the average of ZnO green density is 3.260 g/cm3. This value experienced the increase of 0.583% at 60 seconds and 3.098% at 90 seconds.

Jaringan kolaborasi para penulis

40 penulis · 135 tautan kepenulisan bersama · 55 lintas organisasi · menampilkan 40 yang paling banyak terhubung

Arahkan kursor atau ketuk sebuah nama untuk menyorot rekan penulisnya. Klik dua kali untuk membuka halaman penulis.

  • State University of Malang
  • Politeknik Negeri Malang
  • Oregon Institute of Technology
  • Politeknik Negeri Semarang
  • Universitas Negeri Padang
  • Universiti Teknologi Petronas
  • Syarif Hidayatullah State Islamic University Jakarta
  • Organisasi lain
  • Organisasi berbeda
  • Organisasi sama
  • Afiliasi tidak diketahui
  • Garis lebih tebal = lebih banyak artikel bersama · lingkaran lebih besar = lebih banyak artikel
Tampilkan sebagai tabel
Rekan penulisOrganisasiArtikel bersama
Avita Ayu PermanasariState University of Malang5
Diki Dwi PramonoState University of Malang5
Zakki Fuadi EmzainPoliteknik Negeri Malang5
Am. MufarrihPoliteknik Negeri Malang4
Ratna MonasariPoliteknik Negeri Malang3
Timotius PasangOregon Institute of Technology2
Alief MuhammadState University of Malang2
Ali Sai’inPoliteknik Negeri Semarang2
Andre KurniawanUniversitas Negeri Padang2
Ayu WarestuState University of Malang1
Gilang Putra Pratama ArifiansyahState University of Malang1
Dharma MaheswaraState University of Malang1
Sukarni SukarniState University of Malang1
Wahyunengsih WahyunengsihSyarif Hidayatullah State Islamic University Jakarta1
Muhammad Najib MauludiState University of Malang1
Sukarni SukarniState University of Malang1
Siti Nur Azella ZaineUniversiti Teknologi Petronas1
S. M. Shahrul Nizan Shikh ZahariUniversiti Sains Islam Malaysia1
Nur Azliza AhmadMahsa University1
Mohammad Sugi HartonoPoliteknik Negeri Malang1
Fina Andika Frida AstutiPoliteknik Negeri Malang1
Ahmad Hanif FirdausPoliteknik Negeri Malang1
Lutfi HakimPoliteknik Negeri Banyuwangi1
Moh. HartonoPoliteknik Negeri Malang1
Moh. Nasir HariyantoPoliteknik Negeri Malang1
Fataa KusumattaqiinPoliteknik Negeri Samarinda1
Rangga E. SantosoCranfield University1
Syamsul HadiPoliteknik Negeri Malang1
Dany Ardymas KurniawanState University of Malang1
Ahmad Atif FikriState University of Malang1
Jeefferie Abd RazakUniversiti Teknikal Malaysia Melaka1
Muhamad Rizky AkbarState University of Malang1
Imam Muda NauriState University of Malang1
Andoko AndokoState University of Malang1
Riduwan PrasetyaState University of Malang1
Muhammad Faizullah PashaState University of Malang1
Muhammad Wahid DarmawanState University of Malang1

Afiliasi berasal dari OpenAlex; metadata OAI-PMH jurnal tidak memuatnya. Penulis tanpa ID OpenAlex dicocokkan berdasarkan nama, sehingga dua orang bisa tergabung atau satu orang bisa terpisah.

Sumber metadata: OAI-PMH (metadata jurnal) http://ijaas.iaescore.com/index.php/IJAAS/oai, pertama di-harvest 8 Nov 2026, terakhir terlihat 16 Nov 2026.
Metadata asli (oai_dc)
<oai_dc:dc xmlns="http://www.openarchives.org/OAI/2.0/" xmlns:dc="http://purl.org/dc/elements/1.1/" xmlns:oai_dc="http://www.openarchives.org/OAI/2.0/oai_dc/" xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance" xsi:schemaLocation="http://www.openarchives.org/OAI/2.0/oai_dc/  http://www.openarchives.org/OAI/2.0/oai_dc.xsd">
	<dc:title xml:lang="en-US">Physical Properties and Compressive Strength of Zinc Oxide Nanopowder as a Potential Dental Amalgam Material</dc:title>
	<dc:creator>Qosim, Nanang</dc:creator>
	<dc:creator>Murdanto, Putut</dc:creator>
	<dc:creator>Puspitasari, Poppy</dc:creator>
	<dc:description xml:lang="en-US">In this study, the application of nanotechnology was applied in the dentistry field, especially in the innovation of dental amalgam material. To date, mercury (Hg) has been used widely as dental amalgam material with consideration of the cheap price, ease of use, and good mechanical strength. However, last few years, many problems have been faced in the dentistry field due to the use of mercury. Hence, new material is needed as an innovation to eliminate the mercury from dental amalgam composition. This research was conducted to analyze the physical properties and compressive strength of zinc oxide (ZnO) nanopowder as a potential dental amalgam material. The physical properties such as morphology and dimensions were analyzed by SEM and XRD. Further, the compression test was conducted by using hydraulic press machine. The results showed that the ZnO nanopowder analyzed has the particle size of 14.34 nm with the morphology classified as nanorods type. On the compression load of 500 kg, the average of ZnO green density is 3.170 g/cm3. This value experienced the increase of 4.763% when the load was set to 1000 kg, and 7.539% at 2000 kg. The dwelling time also took the same effect. At 30 seconds, the average of ZnO green density is 3.260 g/cm3. This value experienced the increase of 0.583% at 60 seconds and 3.098% at 90 seconds.</dc:description>
	<dc:publisher xml:lang="en-US">Institute of Advanced Engineering and Science</dc:publisher>
	<dc:contributor xml:lang="en-US"></dc:contributor>
	<dc:date>2018-06-01</dc:date>
	<dc:type>info:eu-repo/semantics/article</dc:type>
	<dc:type>info:eu-repo/semantics/publishedVersion</dc:type>
	<dc:type xml:lang="en-US"></dc:type>
	<dc:format>application/pdf</dc:format>
	<dc:identifier>https://ijaas.iaescore.com/index.php/IJAAS/article/view/10752</dc:identifier>
	<dc:identifier>10.11591/ijaas.v7.i2.pp97-101</dc:identifier>
	<dc:source xml:lang="en-US">International Journal of Advances in Applied Sciences; Vol 7, No 2: June 2018; 97-101</dc:source>
	<dc:source>2722-2594</dc:source>
	<dc:source>2252-8814</dc:source>
	<dc:source>10.11591/ijaas.v7.i2</dc:source>
	<dc:language>eng</dc:language>
	<dc:relation>https://ijaas.iaescore.com/index.php/IJAAS/article/view/10752/8901</dc:relation>
	<dc:rights xml:lang="en-US">Copyright (c) 2018 Nanang Qosim, Putut Murdanto, Poppy Puspitasari</dc:rights>
	<dc:rights xml:lang="en-US">http://creativecommons.org/licenses/by-sa/4.0</dc:rights>
</oai_dc:dc>