Melola Discovery

← Melola Discovery

Akses terbuka Jurnal SINTA 1

Experimental study of RDF-5 performance based on natural waste on fast pyrolysis process on the quality of the liquid smoke

International Journal of Advances in Applied Sciences · Vol. 12 No. 3 (2023) · hlm. 250–256

DOI
10.11591/ijaas.v12.i3.pp250-256
ISSN
2722-2594, 2252-8814
Terbit
2023-09-01
Penerbit
Institute of Advanced Engineering and Science
Bahasa
eng
Lisensi
creativecommons.org/licenses/by-sa/4.0

Abstrak

Energy problems are one of the cases faced by almost all countries in the world. No longer found oil reserves in significant quantities causing problems in the energy sector. The world's energy needs continue to increase and become a global problem in the use of energy in various sectors resulting in an energy crisis. The use of waste-to-energy (WtE) technology is appropriate, considering that energy needs continue to increase along with the increasing amount of waste that is not managed and hurts the ecosystem. Refuse-derived fuel (RDF) is a waste management technique that converts waste into bio-solid fuel. RDF is produced from the mechanical separation of combustible and non-combustible fractions from waste. Utilizing RDF biomass from durian peel and sugar palm is one of the efforts to maximize the pyrolysis process in organic waste, increasing the combustion potential. Processing durian skin and sugar palm waste into RDF will maximize the potential of the combustion results, which can later facilitate testing. This study also aims to utilize sugar palm waste and durian peel to have a use value as an alternative fuel. This research was an experimental study, fast pyrolysis was employed by using 300 grams both in durian and sugar palm, and the temperature was varied from 400, 500, and 600 °C. The results showed that the test of liquid smoke RDF-5 sugar palm at a temperature of 400 °C at 112 mL and RDF-5 durian at 600 °C at 137 mL.

Jaringan kolaborasi para penulis

22 penulis · 53 tautan kepenulisan bersama · 32 lintas organisasi

Arahkan kursor atau ketuk sebuah nama untuk menyorot rekan penulisnya. Klik dua kali untuk membuka halaman penulis.

  • Sebelas Maret University
  • Universitas Negeri Surabaya
  • Indonesia University of Education
  • National Cheng Kung University
  • Universitas Islam Malang
  • Universiti Teknologi Petronas
  • Utrecht University
  • Organisasi lain
  • Afiliasi tidak diketahui
  • Organisasi berbeda
  • Organisasi sama
  • Afiliasi tidak diketahui
  • Garis lebih tebal = lebih banyak artikel bersama · lingkaran lebih besar = lebih banyak artikel
Tampilkan sebagai tabel
Rekan penulisOrganisasiArtikel bersama
Akhmad Faruq AlhikamiUniversitas Islam Malang3
Fudhail bin Abdul MunirUniversiti Teknologi Petronas3
Budiyono BudiyonoSebelas Maret University2
Aris PurwantoUniversitas Negeri Surabaya2
Eka Dwi AriyantoUniversitas Negeri Surabaya2
Swastika AndiniAfiliasi tidak diketahui1
Ani NurwijayantiSebelas Maret University1
Maarten DolkUtrecht University1
Agus HendriyantoIndonesia University of Education1
Sani SaharaIndonesia University of Education1
Tri Atmojo KusmayadiAfiliasi tidak diketahui1
Yudi Ari AdiUniversitas Ahmad Dahlan1
Ario WirayaSebelas Maret University1
Triyanto TriyantoState University of Semarang1
Amellia PutriSebelas Maret University1
Indra Jati MukminanSebelas Maret University1
Aris PurwantoUniversitas Negeri Surabaya1

Afiliasi berasal dari OpenAlex; metadata OAI-PMH jurnal tidak memuatnya. Penulis tanpa ID OpenAlex dicocokkan berdasarkan nama, sehingga dua orang bisa tergabung atau satu orang bisa terpisah.

Sumber metadata: OAI-PMH (metadata jurnal) http://ijaas.iaescore.com/index.php/IJAAS/oai, pertama di-harvest 8 Nov 2026, terakhir terlihat 16 Nov 2026.
Metadata asli (oai_dc)
<oai_dc:dc xmlns="http://www.openarchives.org/OAI/2.0/" xmlns:dc="http://purl.org/dc/elements/1.1/" xmlns:oai_dc="http://www.openarchives.org/OAI/2.0/oai_dc/" xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance" xsi:schemaLocation="http://www.openarchives.org/OAI/2.0/oai_dc/  http://www.openarchives.org/OAI/2.0/oai_dc.xsd">
	<dc:title xml:lang="en-US">Experimental study of RDF-5 performance based on natural waste on fast pyrolysis process on the quality of the liquid smoke</dc:title>
	<dc:creator>Saputro, Herman</dc:creator>
	<dc:creator>Fitriana, Laila</dc:creator>
	<dc:creator>Purwanto, Aris</dc:creator>
	<dc:creator>Muslim, Riyadi</dc:creator>
	<dc:creator>Mahmuddin, Muchlis</dc:creator>
	<dc:description xml:lang="en-US">Energy problems are one of the cases faced by almost all countries in the world. No longer found oil reserves in significant quantities causing problems in the energy sector. The world's energy needs continue to increase and become a global problem in the use of energy in various sectors resulting in an energy crisis. The use of waste-to-energy (WtE) technology is appropriate, considering that energy needs continue to increase along with the increasing amount of waste that is not managed and hurts the ecosystem. Refuse-derived fuel (RDF) is a waste management technique that converts waste into bio-solid fuel. RDF is produced from the mechanical separation of combustible and non-combustible fractions from waste. Utilizing RDF biomass from durian peel and sugar palm is one of the efforts to maximize the pyrolysis process in organic waste, increasing the combustion potential. Processing durian skin and sugar palm waste into RDF will maximize the potential of the combustion results, which can later facilitate testing. This study also aims to utilize sugar palm waste and durian peel to have a use value as an alternative fuel. This research was an experimental study, fast pyrolysis was employed by using 300 grams both in durian and sugar palm, and the temperature was varied from 400, 500, and 600 °C. The results showed that the test of liquid smoke RDF-5 sugar palm at a temperature of 400 °C at 112 mL and RDF-5 durian at 600 °C at 137 mL.</dc:description>
	<dc:publisher xml:lang="en-US">Institute of Advanced Engineering and Science</dc:publisher>
	<dc:contributor xml:lang="en-US"></dc:contributor>
	<dc:date>2023-09-01</dc:date>
	<dc:type>info:eu-repo/semantics/article</dc:type>
	<dc:type>info:eu-repo/semantics/publishedVersion</dc:type>
	<dc:type xml:lang="en-US"></dc:type>
	<dc:format>application/pdf</dc:format>
	<dc:identifier>https://ijaas.iaescore.com/index.php/IJAAS/article/view/20718</dc:identifier>
	<dc:identifier>10.11591/ijaas.v12.i3.pp250-256</dc:identifier>
	<dc:source xml:lang="en-US">International Journal of Advances in Applied Sciences; Vol 12, No 3: September 2023; 250-256</dc:source>
	<dc:source>2722-2594</dc:source>
	<dc:source>2252-8814</dc:source>
	<dc:source>10.11591/ijaas.v12.i3</dc:source>
	<dc:language>eng</dc:language>
	<dc:relation>https://ijaas.iaescore.com/index.php/IJAAS/article/view/20718/13044</dc:relation>
	<dc:rights xml:lang="en-US">Copyright (c) 2023 Institute of Advanced Engineering and Science (IAES)</dc:rights>
	<dc:rights xml:lang="en-US">http://creativecommons.org/licenses/by-sa/4.0</dc:rights>
</oai_dc:dc>