Melola Discovery

← Melola Discovery

Akses terbuka Jurnal SINTA 1

Carbonized mangrove wood as photothermal material for solar water desalination

International Journal of Advances in Applied Sciences · Vol. 14 No. 2 (2025) · hlm. 542–551

DOI
10.11591/ijaas.v14.i2.pp542-551
ISSN
2722-2594, 2252-8814
Terbit
2025-06-01
Penerbit
Institute of Advanced Engineering and Science
Bahasa
eng
Lisensi
creativecommons.org/licenses/by-sa/4.0

Abstrak

The investigation into the physical properties of carbonized mangrove wood (CMW) is essential for its development as an efficient solar heat absorber. This study explores the physical characteristics of CMW and its potential application in solar desalination. Initially, the mangrove wood was cleaned with running water, followed by ultrasonication at a frequency of 42 kHz in 96% ethanol for 5 minutes, and then heated at 125 °C for 2 hours. The carbonization process was conducted in a furnace for 1 hour at temperatures of 400, 500, and 600 °C. The physical properties of CMW were analyzed using an X-ray diffractometer (XRD), Fourier transform infrared spectroscopy (FTIR), energy dispersive spectroscopy, and scanning electron microscopy (SEM). The findings revealed the formation of a carbon structure at 2 theta angles of approximately 24.08, 23.26, and 23.16°, with carbon contents of 45.05, 36.86, and 39.37%, respectively. CMW was identified as a porous material, making it highly effective for sunlight absorption in seawater evaporation. The hydroxyl content within the CMW structure enhanced its water evaporation capabilities. In experimental investigations aimed at desalinating seawater, a 300-watt halogen lamp was positioned 15 centimeters above the CMW's surface, resulting in an evaporation rate of 5.33 kg.m-2.h-1. CMW shows significant promise as a solar evaporator.

Jaringan kolaborasi para penulis

21 penulis · 79 tautan kepenulisan bersama · 20 lintas organisasi

Arahkan kursor atau ketuk sebuah nama untuk menyorot rekan penulisnya. Klik dua kali untuk membuka halaman penulis.

  • Sam Ratulangi University
  • State University of Medan
  • Manado State University
  • University of Mataram
  • Bandung Institute of Technology
  • Brown University
  • Universitas Halu Oleo
  • Afiliasi tidak diketahui
  • Organisasi berbeda
  • Organisasi sama
  • Afiliasi tidak diketahui
  • Garis lebih tebal = lebih banyak artikel bersama · lingkaran lebih besar = lebih banyak artikel
Tampilkan sebagai tabel
Rekan penulisOrganisasiArtikel bersama
Kawengian Warouw Alex MasengiSam Ratulangi University6
Stepanus TangdanSam Ratulangi University6
Guntur PasauSam Ratulangi University6
Ruben Cornelius SiagianState University of Medan1
Lulut AlfarisAfiliasi tidak diketahui1
Budiman NasutionState University of Medan1
Winsyahputra RitongaState University of Medan1
Aris DoyanUniversity of Mataram1
La Ode SafiuddinUniversitas Halu Oleo1
Edy GaffarAfiliasi tidak diketahui1
Estavanus HuliselanAfiliasi tidak diketahui1
Satria BijaksanaBandung Institute of Technology1
James M. RussellBrown University1

Afiliasi berasal dari OpenAlex; metadata OAI-PMH jurnal tidak memuatnya. Penulis tanpa ID OpenAlex dicocokkan berdasarkan nama, sehingga dua orang bisa tergabung atau satu orang bisa terpisah.

Sumber metadata: OAI-PMH (metadata jurnal) http://ijaas.iaescore.com/index.php/IJAAS/oai, pertama di-harvest 8 Nov 2026, terakhir terlihat 16 Nov 2026.
Metadata asli (oai_dc)
<oai_dc:dc xmlns="http://www.openarchives.org/OAI/2.0/" xmlns:dc="http://purl.org/dc/elements/1.1/" xmlns:oai_dc="http://www.openarchives.org/OAI/2.0/oai_dc/" xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance" xsi:schemaLocation="http://www.openarchives.org/OAI/2.0/oai_dc/  http://www.openarchives.org/OAI/2.0/oai_dc.xsd">
	<dc:title xml:lang="en-US">Carbonized mangrove wood as photothermal material for solar water desalination</dc:title>
	<dc:creator>Pandara, Dolfie Paulus</dc:creator>
	<dc:creator>Unso, Kristina</dc:creator>
	<dc:creator>Bobanto, Maria Daurina</dc:creator>
	<dc:creator>Tamuntuan, Gerald Hendrik</dc:creator>
	<dc:creator>Angmalisang, Ping Astony</dc:creator>
	<dc:creator>Ferdy, Ferdy</dc:creator>
	<dc:creator>Tiwow, Vistarani Arini</dc:creator>
	<dc:creator>Kumaunang, Maureen</dc:creator>
	<dc:description xml:lang="en-US">The investigation into the physical properties of carbonized mangrove wood (CMW) is essential for its development as an efficient solar heat absorber. This study explores the physical characteristics of CMW and its potential application in solar desalination. Initially, the mangrove wood was cleaned with running water, followed by ultrasonication at a frequency of 42 kHz in 96% ethanol for 5 minutes, and then heated at 125 °C for 2 hours. The carbonization process was conducted in a furnace for 1 hour at temperatures of 400, 500, and 600 °C. The physical properties of CMW were analyzed using an X-ray diffractometer (XRD), Fourier transform infrared spectroscopy (FTIR), energy dispersive spectroscopy, and scanning electron microscopy (SEM). The findings revealed the formation of a carbon structure at 2 theta angles of approximately 24.08, 23.26, and 23.16°, with carbon contents of 45.05, 36.86, and 39.37%, respectively. CMW was identified as a porous material, making it highly effective for sunlight absorption in seawater evaporation. The hydroxyl content within the CMW structure enhanced its water evaporation capabilities. In experimental investigations aimed at desalinating seawater, a 300-watt halogen lamp was positioned 15 centimeters above the CMW's surface, resulting in an evaporation rate of 5.33 kg.m-2.h-1. CMW shows significant promise as a solar evaporator.</dc:description>
	<dc:publisher xml:lang="en-US">Institute of Advanced Engineering and Science</dc:publisher>
	<dc:contributor xml:lang="en-US"></dc:contributor>
	<dc:date>2025-06-01</dc:date>
	<dc:type>info:eu-repo/semantics/article</dc:type>
	<dc:type>info:eu-repo/semantics/publishedVersion</dc:type>
	<dc:type xml:lang="en-US"></dc:type>
	<dc:format>application/pdf</dc:format>
	<dc:identifier>https://ijaas.iaescore.com/index.php/IJAAS/article/view/21412</dc:identifier>
	<dc:identifier>10.11591/ijaas.v14.i2.pp542-551</dc:identifier>
	<dc:source xml:lang="en-US">International Journal of Advances in Applied Sciences; Vol 14, No 2: June 2025; 542-551</dc:source>
	<dc:source>2722-2594</dc:source>
	<dc:source>2252-8814</dc:source>
	<dc:source>10.11591/ijaas.v14.i2</dc:source>
	<dc:language>eng</dc:language>
	<dc:relation>https://ijaas.iaescore.com/index.php/IJAAS/article/view/21412/13284</dc:relation>
	<dc:rights xml:lang="en-US">Copyright (c) 2025 Intelektual Pustaka Media Utama (IPMU)</dc:rights>
	<dc:rights xml:lang="en-US">http://creativecommons.org/licenses/by-sa/4.0</dc:rights>
</oai_dc:dc>