Melola Discovery

← Melola Discovery

Akses terbuka Jurnal SINTA 1

Characteristics of biochar from agricultural residues produced by traditional combustion and its potential as a soil amendment

International Journal of Advances in Applied Sciences · Vol. 15 No. 2 (2026) · hlm. 611–621

DOI
10.11591/ijaas.v15.i2.pp611-621
ISSN
2722-2594, 2252-8814
Terbit
2026-06-01
Penerbit
Institute of Advanced Engineering and Science
Bahasa
eng
Lisensi
creativecommons.org/licenses/by-sa/4.0

Abstrak

Biochar is a carbon-rich material produced through pyrolysis. However, pyrolysis methods that generate high-quality biochar typically require expensive equipment and technical expertise. This study examines the characteristics of biochar produced from rice husk, cassava wood, and corn cobs using a traditional burning method as an alternative to pyrolysis. The research results showed that the carbon content of biochar produced using traditional methods was comparable to, or even higher than, biochar produced using more advanced pyrolysis methods. Corncob biochar had the highest carbon content among all samples. X-ray fluorescence (XRF) analysis revealed that rice husk biochar had the highest silica content, while cassava wood biochar showed higher percentages of calcium (Ca) and magnesium (Mg) than the other biochars. X-ray diffraction (XRD) characterization results indicated a higher degree of graphitic crystallinity in the corncob biochar, while Fourier transform infrared spectroscopy (FTIR) spectra confirmed the presence of hydroxyl groups, aromatic C=C, and cellulose residues in all samples. thermogravimetric–differential thermal analysis (TG-DTA) and differential scanning calorimetry (DSC) analyses provided insights into thermal behavior and carbonization levels, with corncob biochar having the highest carbon content and thermal resistance. The application of biochar to acidic soils has been shown to significantly increase soil pH and organic carbon content. The simple combustion method used in this study is capable of producing biochar with diverse physicochemical properties, thus offering a sustainable approach to soil improvement, increased nutrient retention, and carbon sequestration, while providing added value to agricultural waste and waste valorization strategy.

Jaringan kolaborasi para penulis

12 penulis · 36 tautan kepenulisan bersama · 14 lintas organisasi

Arahkan kursor atau ketuk sebuah nama untuk menyorot rekan penulisnya. Klik dua kali untuk membuka halaman penulis.

  • Lampung University
  • National Research and Innovation Agency
  • Gifu University
  • Universitas Nahdlatul Ulama Yogyakarta
  • Malikussaleh University
  • Afiliasi tidak diketahui
  • Organisasi berbeda
  • Organisasi sama
  • Afiliasi tidak diketahui
  • Garis lebih tebal = lebih banyak artikel bersama · lingkaran lebih besar = lebih banyak artikel
Tampilkan sebagai tabel
Rekan penulisOrganisasiArtikel bersama
Dikpride DespaLampung University1
Marwansyah MarwansyahLampung University1
Yul MartinLampung University1
Diah PermataLampung University1
Annisa UlyaLampung University1

Afiliasi berasal dari OpenAlex; metadata OAI-PMH jurnal tidak memuatnya. Penulis tanpa ID OpenAlex dicocokkan berdasarkan nama, sehingga dua orang bisa tergabung atau satu orang bisa terpisah.

Sumber metadata: OAI-PMH (metadata jurnal) http://ijaas.iaescore.com/index.php/IJAAS/oai, pertama di-harvest 8 Nov 2026, terakhir terlihat 16 Nov 2026.
Metadata asli (oai_dc)
<oai_dc:dc xmlns="http://www.openarchives.org/OAI/2.0/" xmlns:dc="http://purl.org/dc/elements/1.1/" xmlns:oai_dc="http://www.openarchives.org/OAI/2.0/oai_dc/" xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance" xsi:schemaLocation="http://www.openarchives.org/OAI/2.0/oai_dc/  http://www.openarchives.org/OAI/2.0/oai_dc.xsd">
	<dc:title xml:lang="en-US">Characteristics of biochar from agricultural residues produced  by traditional combustion and its potential as a soil amendment</dc:title>
	<dc:creator>Rahmat, Ali</dc:creator>
	<dc:creator>Sukamto, Sukamto</dc:creator>
	<dc:creator>Ari Respat, Santi</dc:creator>
	<dc:creator>Arum, Fera</dc:creator>
	<dc:creator>Dwi Susanti, Wiwiek</dc:creator>
	<dc:creator>Azmi, Yudia</dc:creator>
	<dc:creator>Wirda, Zurrahmi</dc:creator>
	<dc:description xml:lang="en-US">Biochar is a carbon-rich material produced through pyrolysis. However, pyrolysis methods that generate high-quality biochar typically require expensive equipment and technical expertise. This study examines the characteristics of biochar produced from rice husk, cassava wood, and corn cobs using a traditional burning method as an alternative to pyrolysis. The research results showed that the carbon content of biochar produced using traditional methods was comparable to, or even higher than, biochar produced using more advanced pyrolysis methods. Corncob biochar had the highest carbon content among all samples. X-ray fluorescence (XRF) analysis revealed that rice husk biochar had the highest silica content, while cassava wood biochar showed higher percentages of calcium (Ca) and magnesium (Mg) than the other biochars. X-ray diffraction (XRD) characterization results indicated a higher degree of graphitic crystallinity in the corncob biochar, while Fourier transform infrared spectroscopy (FTIR) spectra confirmed the presence of hydroxyl groups, aromatic C=C, and cellulose residues in all samples. thermogravimetric–differential thermal analysis (TG-DTA) and differential scanning calorimetry (DSC) analyses provided insights into thermal behavior and carbonization levels, with corncob biochar having the highest carbon content and thermal resistance. The application of biochar to acidic soils has been shown to significantly increase soil pH and organic carbon content. The simple combustion method used in this study is capable of producing biochar with diverse physicochemical properties, thus offering a sustainable approach to soil improvement, increased nutrient retention, and carbon sequestration, while providing added value to agricultural waste and waste valorization strategy.</dc:description>
	<dc:publisher xml:lang="en-US">Institute of Advanced Engineering and Science</dc:publisher>
	<dc:contributor xml:lang="en-US"></dc:contributor>
	<dc:date>2026-06-01</dc:date>
	<dc:type>info:eu-repo/semantics/article</dc:type>
	<dc:type>info:eu-repo/semantics/publishedVersion</dc:type>
	<dc:type xml:lang="en-US"></dc:type>
	<dc:format>application/pdf</dc:format>
	<dc:identifier>https://ijaas.iaescore.com/index.php/IJAAS/article/view/21888</dc:identifier>
	<dc:identifier>10.11591/ijaas.v15.i2.pp611-621</dc:identifier>
	<dc:source xml:lang="en-US">International Journal of Advances in Applied Sciences; Vol 15, No 2: June 2026; 611-621</dc:source>
	<dc:source>2722-2594</dc:source>
	<dc:source>2252-8814</dc:source>
	<dc:source>10.11591/ijaas.v15.i2</dc:source>
	<dc:language>eng</dc:language>
	<dc:relation>https://ijaas.iaescore.com/index.php/IJAAS/article/view/21888/13445</dc:relation>
	<dc:rights xml:lang="en-US">Copyright (c) 2026 Ali Rahmat, Sukamto, Santi Ari Respati, Fera Arum, Wiwiek Dwi Susanti, Yudia Azmi,  Zurrahmi Wirda</dc:rights>
	<dc:rights xml:lang="en-US">http://creativecommons.org/licenses/by-sa/4.0</dc:rights>
</oai_dc:dc>