Melola Discovery

← Melola Discovery

Akses terbuka Jurnal SINTA 1

Experimental study on annealing S45C steel: effect of temperature and time on hardness, impact strength

International Journal of Advances in Applied Sciences · Vol. 15 No. 1 (2026) · hlm. 343–354

DOI
10.11591/ijaas.v15.i1.pp343-354
ISSN
2722-2594, 2252-8814
Terbit
2026-03-01
Penerbit
Institute of Advanced Engineering and Science
Bahasa
eng
Lisensi
creativecommons.org/licenses/by-sa/4.0

Abstrak

Steel generally exhibits poor wear and friction resistance, making it necessary to improve its surface mechanical properties, particularly hardness and microstructure, to enhance performance. Heat treatment is one of the most effective methods for achieving these improvements. This study aimed to optimize the heat treatment parameters of S45C medium-carbon steel to improve hardness and impact strength using response surface methodology (RSM). Experimental trials were conducted at annealing temperatures of 800 °C, 850 °C, and 900 °C with holding times of 30, 60, and 90 minutes, followed by cooling in water, oil, or air. Hardness (HRC) and impact strength (Nm/mm²) were measured, and the data were analyzed using RSM with a central composite design (CCD). Quadratic models were found to be statistically significant for both hardness (Prob > F = 0.0222) and impact strength (Prob > F = 0.0338), confirming their validity. The optimization results indicated that a holding time of 60 minutes within the 850-900 °C range provides the best balance between high hardness (>55 HRC) and adequate impact strength (>0.68 Nm/mm²). These findings not only validate the predictive capability of RSM in heat treatment optimization but also provide practical guidelines for industrial applications of S45C steel in automotive, tooling, and structural components.

Jaringan kolaborasi para penulis

40 penulis · 151 tautan kepenulisan bersama · 87 lintas organisasi · menampilkan 40 yang paling banyak terhubung

Arahkan kursor atau ketuk sebuah nama untuk menyorot rekan penulisnya. Klik dua kali untuk membuka halaman penulis.

  • Politeknik Negeri Ujung Pandang
  • Institut Teknologi Sepuluh Nopember
  • State University of Makassar
  • Politeknik Bosowa
  • University of Technology Malaysia
  • Tadulako University
  • Universitas Halu Oleo
  • Organisasi lain
  • Afiliasi tidak diketahui
  • Organisasi berbeda
  • Organisasi sama
  • Afiliasi tidak diketahui
  • Garis lebih tebal = lebih banyak artikel bersama · lingkaran lebih besar = lebih banyak artikel
Tampilkan sebagai tabel
Rekan penulisOrganisasiArtikel bersama
Sofyan SofyanPoliteknik Negeri Ujung Pandang4
Andi FitriatiPoliteknik Bosowa3
Asma AmaliahPoliteknik Negeri Ujung Pandang3
Arthur Halik RazakPoliteknik Negeri Ujung Pandang3
Yosrihard BasonganPoliteknik Negeri Ujung Pandang3
Ontoseno PenangsangInstitut Teknologi Sepuluh Nopember2
Akhyar MuchtarState University of Makassar2
Yuli Asmi RahmanTadulako University2
Musfirah Putri LukmanPoliteknik Negeri Ujung Pandang2
Nurhayati NurhayatiPoliteknik Negeri Ujung Pandang2
Yuniarti YuniartiPoliteknik Negeri Ujung Pandang2
Muhammad Arsyad SuyutiPoliteknik Negeri Ujung Pandang2
Ahmad Nurul MuttaqinPoliteknik Negeri Ujung Pandang2
Isminarti IsminartiPoliteknik Bosowa2
Mohd Wazir MustafaUniversity of Technology Malaysia1
Makmur SainiPoliteknik Negeri Ujung Pandang1
Abdullah Asuhaimi Mohd ZinUniversity of Technology Malaysia1
A. R. SultanPoliteknik Negeri Ujung Pandang1
Rony Seto WibowoInstitut Teknologi Sepuluh Nopember1
Muhammad Daffa CahyonoputraInstitut Teknologi Sepuluh Nopember1
Dimas Fajar Uman PutraInstitut Teknologi Sepuluh Nopember1
Satriani Said AkhmadPoliteknik Negeri Ujung Pandang1
Ahmad GaffarPoliteknik Negeri Ujung Pandang1
Yoan ElviralitaPoliteknik Bosowa1
Sarma ThahaPoliteknik Negeri Ujung Pandang1
Mustika MustikaUniversitas Halu Oleo1
Mochammad Apriyadi Hadi SiradKhairun University1
Anisya SonitaUniversitas Muhammadiyah Bengkulu1
Nur HidayahPoliteknik Negeri Ujung Pandang1
Muh. AhyarPoliteknik Negeri Ujung Pandang1
Asriyadi AsriyadiPoliteknik Negeri Ujung Pandang1
Mustika MustikaUniversitas Muhammadiyah Metro1
Asmah AkhrianaUniversitas DIPA Makassar1
Mukhlisin MukhlisinState University of Makassar1

Afiliasi berasal dari OpenAlex; metadata OAI-PMH jurnal tidak memuatnya. Penulis tanpa ID OpenAlex dicocokkan berdasarkan nama, sehingga dua orang bisa tergabung atau satu orang bisa terpisah.

Sumber metadata: OAI-PMH (metadata jurnal) http://ijaas.iaescore.com/index.php/IJAAS/oai, pertama di-harvest 8 Nov 2026, terakhir terlihat 16 Nov 2026.
Metadata asli (oai_dc)
<oai_dc:dc xmlns="http://www.openarchives.org/OAI/2.0/" xmlns:dc="http://purl.org/dc/elements/1.1/" xmlns:oai_dc="http://www.openarchives.org/OAI/2.0/oai_dc/" xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance" xsi:schemaLocation="http://www.openarchives.org/OAI/2.0/oai_dc/  http://www.openarchives.org/OAI/2.0/oai_dc.xsd">
	<dc:title xml:lang="en-US">Experimental study on annealing S45C steel: effect of temperature and time on hardness, impact strength</dc:title>
	<dc:creator>Sirman, Mahadir</dc:creator>
	<dc:creator>Syahrisal, Syahrisal</dc:creator>
	<dc:creator>Pasandang, Henny</dc:creator>
	<dc:creator>Nur, Rusdi</dc:creator>
	<dc:creator>Faraby, Muhira Dzar</dc:creator>
	<dc:creator>Mukhlisin, Mukhlisin</dc:creator>
	<dc:description xml:lang="en-US">Steel generally exhibits poor wear and friction resistance, making it necessary to improve its surface mechanical properties, particularly hardness and microstructure, to enhance performance. Heat treatment is one of the most effective methods for achieving these improvements. This study aimed to optimize the heat treatment parameters of S45C medium-carbon steel to improve hardness and impact strength using response surface methodology (RSM). Experimental trials were conducted at annealing temperatures of 800 °C, 850 °C, and 900 °C with holding times of 30, 60, and 90 minutes, followed by cooling in water, oil, or air. Hardness (HRC) and impact strength (Nm/mm²) were measured, and the data were analyzed using RSM with a central composite design (CCD). Quadratic models were found to be statistically significant for both hardness (Prob &amp;gt; F = 0.0222) and impact strength (Prob &amp;gt; F = 0.0338), confirming their validity. The optimization results indicated that a holding time of 60 minutes within the 850-900 °C range provides the best balance between high hardness (&amp;gt;55 HRC) and adequate impact strength (&amp;gt;0.68 Nm/mm²). These findings not only validate the predictive capability of RSM in heat treatment optimization but also provide practical guidelines for industrial applications of S45C steel in automotive, tooling, and structural components.</dc:description>
	<dc:publisher xml:lang="en-US">Institute of Advanced Engineering and Science</dc:publisher>
	<dc:contributor xml:lang="en-US"></dc:contributor>
	<dc:date>2026-03-01</dc:date>
	<dc:type>info:eu-repo/semantics/article</dc:type>
	<dc:type>info:eu-repo/semantics/publishedVersion</dc:type>
	<dc:type xml:lang="en-US"></dc:type>
	<dc:format>application/pdf</dc:format>
	<dc:identifier>https://ijaas.iaescore.com/index.php/IJAAS/article/view/22219</dc:identifier>
	<dc:identifier>10.11591/ijaas.v15.i1.pp343-354</dc:identifier>
	<dc:source xml:lang="en-US">International Journal of Advances in Applied Sciences; Vol 15, No 1: March 2026; 343-354</dc:source>
	<dc:source>2722-2594</dc:source>
	<dc:source>2252-8814</dc:source>
	<dc:source>10.11591/ijaas.v15.i1</dc:source>
	<dc:language>eng</dc:language>
	<dc:relation>https://ijaas.iaescore.com/index.php/IJAAS/article/view/22219/13419</dc:relation>
	<dc:rights xml:lang="en-US">Copyright (c) 2026 Mahadir Sirman, Syahrisal Syahrisal, Henny Pasandang, Rusdi Nur, Muhira Dzar Faraby, Mukhlisin Mukhlisin</dc:rights>
	<dc:rights xml:lang="en-US">http://creativecommons.org/licenses/by-sa/4.0</dc:rights>
</oai_dc:dc>