Melola Discovery

← Melola Discovery

Akses terbuka Jurnal SINTA 1

Determination of Fault Location and Type in Distribution Systems using Clark Transformation and Neural Network

International Journal of Applied Power Engineering (IJAPE) · Vol. 1 No. 2 (2012) · hlm. 75–86

DOI
10.11591/ijape.v1.i2.pp75-86
ISSN
2722-2624, 2252-8792
Terbit
2012-08-01
Penerbit
Institute of Advanced Engineering and Science
Bahasa
eng
Lisensi
creativecommons.org/licenses/by-sa/4.0

Abstrak

In this paper, an accurate method for determination of fault location and fault type in power distribution systems by neural network is proposed. This method uses neural network to classify and locate normal and composite types of faults as phase to earth, two phases to earth, phase to phase. Also this method can distinguish three phase short circuit from normal network position. In the presented method, neural network is trained by αβ space vector parameters. These parameters are obtained using clarke transformation. Simulation results are presented in the MATLAB software. Two neural networks (MLP and RBF) are investigated and their results are compared with each other. The accuracy and benefit of the proposed method for determination of fault type and location in distribution power systems has been shown in simulation results.

Kata kunci

Jaringan kolaborasi para penulis

8 penulis · 8 tautan kepenulisan bersama

Arahkan kursor atau ketuk sebuah nama untuk menyorot rekan penulisnya. Klik dua kali untuk membuka halaman penulis.

  • Imam Khomeini International University
  • Afiliasi tidak diketahui
  • Organisasi berbeda
  • Organisasi sama
  • Afiliasi tidak diketahui
  • Garis lebih tebal = lebih banyak artikel bersama · lingkaran lebih besar = lebih banyak artikel
Tampilkan sebagai tabel
Rekan penulisOrganisasiArtikel bersama
Haniyeh MarefatjouImam Khomeini International University3
Masoud SafariAfiliasi tidak diketahui1
Iman SoltaniImam Khomeini International University1
Hossein FaramarziImam Khomeini International University1
Majid KeshmiriAfiliasi tidak diketahui1
Majid SalimAfiliasi tidak diketahui1

Afiliasi berasal dari OpenAlex; metadata OAI-PMH jurnal tidak memuatnya. Penulis tanpa ID OpenAlex dicocokkan berdasarkan nama, sehingga dua orang bisa tergabung atau satu orang bisa terpisah.

Sumber metadata: OAI-PMH (metadata jurnal) http://ijape.iaescore.com/index.php/IJAPE/oai, pertama di-harvest 8 Nov 2026, terakhir terlihat 16 Nov 2026.
Metadata asli (oai_dc)
<oai_dc:dc xmlns="http://www.openarchives.org/OAI/2.0/" xmlns:dc="http://purl.org/dc/elements/1.1/" xmlns:oai_dc="http://www.openarchives.org/OAI/2.0/oai_dc/" xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance" xsi:schemaLocation="http://www.openarchives.org/OAI/2.0/oai_dc/  http://www.openarchives.org/OAI/2.0/oai_dc.xsd">
	<dc:title xml:lang="en-US">Determination of Fault Location and Type in Distribution Systems using Clark Transformation and Neural Network</dc:title>
	<dc:creator>Sarvi, Mohammad</dc:creator>
	<dc:creator>Torabi, S. M.</dc:creator>
	<dc:subject xml:lang="en-US">Fault location; Fault type; Clark transformation; Neural network; Distribution.</dc:subject>
	<dc:description xml:lang="en-US">In this paper, an accurate method for determination of fault location and fault type in power distribution systems by neural network is proposed. This method uses neural network to classify and locate normal and composite types of faults as phase to earth, two phases to earth, phase to phase. Also this method can distinguish three phase short circuit from normal network position. In the presented method, neural network is trained by αβ space vector parameters. These parameters are obtained using clarke transformation. Simulation results are presented in the MATLAB software. Two neural networks (MLP and RBF) are investigated and their results are compared with each other. The accuracy and benefit of the proposed method for determination of fault type and location in distribution power systems has been shown in simulation results.</dc:description>
	<dc:publisher xml:lang="en-US">Institute of Advanced Engineering and Science</dc:publisher>
	<dc:contributor xml:lang="en-US"></dc:contributor>
	<dc:date>2012-08-01</dc:date>
	<dc:type>info:eu-repo/semantics/article</dc:type>
	<dc:type>info:eu-repo/semantics/publishedVersion</dc:type>
	<dc:type xml:lang="en-US"></dc:type>
	<dc:format>application/pdf</dc:format>
	<dc:identifier>https://ijape.iaescore.com/index.php/IJAPE/article/view/1287</dc:identifier>
	<dc:identifier>10.11591/ijape.v1.i2.pp75-86</dc:identifier>
	<dc:source xml:lang="en-US">International Journal of Applied Power Engineering (IJAPE); Vol 1, No 2: August 2012; 75-86</dc:source>
	<dc:source>2722-2624</dc:source>
	<dc:source>2252-8792</dc:source>
	<dc:source>10.11591/ijape.v1.i2</dc:source>
	<dc:language>eng</dc:language>
	<dc:relation>https://ijape.iaescore.com/index.php/IJAPE/article/view/1287/731</dc:relation>
	<dc:rights xml:lang="en-US">Copyright (c) 2021 Institute of Advanced Engineering and Science</dc:rights>
	<dc:rights xml:lang="en-US">http://creativecommons.org/licenses/by-sa/4.0</dc:rights>
</oai_dc:dc>