Melola Discovery

← Melola Discovery

Akses terbuka Jurnal SINTA 1

Performance of Grid-connected Photovoltaic System in Equatorial Rainforest Fully Humid Climate of Malaysia

International Journal of Applied Power Engineering (IJAPE) · Vol. 2 No. 3 (2013) · hlm. 105–114

DOI
10.11591/ijape.v2.i3.pp105-114
ISSN
2722-2624, 2252-8792
Terbit
2013-12-01
Penerbit
Institute of Advanced Engineering and Science
Bahasa
eng
Lisensi
creativecommons.org/licenses/by-sa/4.0

Abstrak

This paper presents a result obtained from a comparative study among three different photovoltaic (PV) module technologies for grid-connected photovoltaic system (GCPV) under Malaysia’s real operating conditions. The obtained results were slightly different from the performance ratio (PR) investigation which showed the average annual performance of 78.2% for polycrystalline, 94.6% for a-Si thin-film and 81% for monocrystalline PV technologies over four years monitored period. The outdoor evaluation results showed that a-Si thin-film PV modules demonstrate the highest and better in terms of final yield, performance ratio and PV array/system efficiency over the entire monitored period. In other hands, a-Si thin-film demonstrated the reliability and better in system performance

Kata kunci

Jaringan kolaborasi para penulis

4 penulis · 6 tautan kepenulisan bersama

Arahkan kursor atau ketuk sebuah nama untuk menyorot rekan penulisnya. Klik dua kali untuk membuka halaman penulis.

  • Afiliasi tidak diketahui
  • Organisasi berbeda
  • Organisasi sama
  • Afiliasi tidak diketahui
  • Garis lebih tebal = lebih banyak artikel bersama · lingkaran lebih besar = lebih banyak artikel
Tampilkan sebagai tabel
Rekan penulisOrganisasiArtikel bersama

Afiliasi berasal dari OpenAlex; metadata OAI-PMH jurnal tidak memuatnya. Penulis tanpa ID OpenAlex dicocokkan berdasarkan nama, sehingga dua orang bisa tergabung atau satu orang bisa terpisah.

Sumber metadata: OAI-PMH (metadata jurnal) http://ijape.iaescore.com/index.php/IJAPE/oai, pertama di-harvest 8 Nov 2026, terakhir terlihat 16 Nov 2026.
Metadata asli (oai_dc)
<oai_dc:dc xmlns="http://www.openarchives.org/OAI/2.0/" xmlns:dc="http://purl.org/dc/elements/1.1/" xmlns:oai_dc="http://www.openarchives.org/OAI/2.0/oai_dc/" xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance" xsi:schemaLocation="http://www.openarchives.org/OAI/2.0/oai_dc/  http://www.openarchives.org/OAI/2.0/oai_dc.xsd">
	<dc:title xml:lang="en-US">Performance of Grid-connected Photovoltaic System in Equatorial Rainforest Fully Humid Climate of Malaysia</dc:title>
	<dc:creator>Hussin, Mohamad Zhafran</dc:creator>
	<dc:creator>Omar, A. M.</dc:creator>
	<dc:creator>Zain, Z. M.</dc:creator>
	<dc:creator>Shaari, S.</dc:creator>
	<dc:subject xml:lang="en-US">Crysralline (c-Si); Grid-connected (GC); Thin-film (TF); Photovoltaic (PV);System Performance</dc:subject>
	<dc:description xml:lang="en-US">This paper presents a result obtained from a comparative study among three different photovoltaic (PV) module technologies for grid-connected photovoltaic system (GCPV) under Malaysia’s real operating conditions. The obtained results were slightly different from the performance ratio (PR) investigation which showed the average annual performance of 78.2% for polycrystalline, 94.6% for a-Si thin-film and 81% for monocrystalline PV technologies over four years monitored period. The outdoor evaluation results showed that a-Si thin-film PV modules demonstrate the highest and better in terms of final yield, performance ratio and PV array/system efficiency over the entire monitored period. In other hands, a-Si thin-film demonstrated the reliability and better in system performance</dc:description>
	<dc:publisher xml:lang="en-US">Institute of Advanced Engineering and Science</dc:publisher>
	<dc:contributor xml:lang="en-US"></dc:contributor>
	<dc:date>2013-12-01</dc:date>
	<dc:type>info:eu-repo/semantics/article</dc:type>
	<dc:type>info:eu-repo/semantics/publishedVersion</dc:type>
	<dc:type xml:lang="en-US"></dc:type>
	<dc:format>application/pdf</dc:format>
	<dc:identifier>https://ijape.iaescore.com/index.php/IJAPE/article/view/1312</dc:identifier>
	<dc:identifier>10.11591/ijape.v2.i3.pp105-114</dc:identifier>
	<dc:source xml:lang="en-US">International Journal of Applied Power Engineering (IJAPE); Vol 2, No 3: December 2013; 105-114</dc:source>
	<dc:source>2722-2624</dc:source>
	<dc:source>2252-8792</dc:source>
	<dc:source>10.11591/ijape.v2.i3</dc:source>
	<dc:language>eng</dc:language>
	<dc:relation>https://ijape.iaescore.com/index.php/IJAPE/article/view/1312/750</dc:relation>
	<dc:rights xml:lang="en-US">Copyright (c) 2021 Institute of Advanced Engineering and Science</dc:rights>
	<dc:rights xml:lang="en-US">http://creativecommons.org/licenses/by-sa/4.0</dc:rights>
</oai_dc:dc>