Melola Discovery

← Melola Discovery

Akses terbuka Jurnal SINTA 1

Minimizing the switching losses in the SiC MOSFET by using buried oxide

International Journal of Applied Power Engineering (IJAPE) · Vol. 14 No. 3 (2025) · hlm. 613–619

DOI
10.11591/ijape.v14.i3.pp613-619
ISSN
2722-2624, 2252-8792
Terbit
2025-09-01
Penerbit
Institute of Advanced Engineering and Science
Bahasa
eng
Lisensi
creativecommons.org/licenses/by-sa/4.0

Abstrak

For optimizing the efficiency of the power switching devices, it is important to reduce the switching power losses. One method to minimize the switching power losses is to reduce the gate drain charge (QGD). In this paper, a 1.2 kV SiC MOSFET device with a buried oxide has been proposed to minimize QGD. The proposed design has been conducted by using the TCAD simulation program. The on-resistance (Ron,sp), QGD have been measured and analyzed based on the width and thickness of the buried oxide layer and compared with the measurement of traditional SiC MOSFET. The obtained results indicate that the QGD of 1.2 kV SiC MOSFET with buried oxide with WBO of 0.25 μm and TBO of 0.3 μm was reduced to about 31.3% which mean a minimize of power losses. The comparison results indicate that the proposed device with a buried oxide layer can be effectively used as an optimum solution for minimizing the power switching losses.

Kata kunci

Jaringan kolaborasi para penulis

17 penulis · 37 tautan kepenulisan bersama · 21 lintas organisasi

Arahkan kursor atau ketuk sebuah nama untuk menyorot rekan penulisnya. Klik dua kali untuk membuka halaman penulis.

  • University of Tikrit
  • University of Kirkuk
  • Northern Technical University
  • Middle Technical University
  • National University of Malaysia
  • Graphic Era University
  • Afiliasi tidak diketahui
  • Organisasi berbeda
  • Organisasi sama
  • Afiliasi tidak diketahui
  • Garis lebih tebal = lebih banyak artikel bersama · lingkaran lebih besar = lebih banyak artikel
Tampilkan sebagai tabel
Rekan penulisOrganisasiArtikel bersama
Kamil Jadu AliUniversity of Tikrit5
Nabeel Mohammed Akram SamadNorthern Technical University2
Mohammed Ayad SaadNational University of Malaysia2
Saber Izadpanah ToosAfiliasi tidak diketahui2
Mohit BajajGraphic Era University2
Ahmed Hasan MohammedUniversity of Tikrit1
Khaleel Ali KhudhurNorthern Technical University1
Jamal Ahmed hameedUniversity of Tikrit1
Thamir Hassan AtyiaUniversity of Tikrit1
Saba F. Ahmed JafUniversity of Kirkuk1
Zubaidah Ghaze AbdulkareemUniversity of Kirkuk1
Khaleel Ali KhudurAfiliasi tidak diketahui1

Afiliasi berasal dari OpenAlex; metadata OAI-PMH jurnal tidak memuatnya. Penulis tanpa ID OpenAlex dicocokkan berdasarkan nama, sehingga dua orang bisa tergabung atau satu orang bisa terpisah.

Sumber metadata: OAI-PMH (metadata jurnal) http://ijape.iaescore.com/index.php/IJAPE/oai, pertama di-harvest 8 Nov 2026, terakhir terlihat 16 Nov 2026.
Metadata asli (oai_dc)
<oai_dc:dc xmlns="http://www.openarchives.org/OAI/2.0/" xmlns:dc="http://purl.org/dc/elements/1.1/" xmlns:oai_dc="http://www.openarchives.org/OAI/2.0/oai_dc/" xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance" xsi:schemaLocation="http://www.openarchives.org/OAI/2.0/oai_dc/  http://www.openarchives.org/OAI/2.0/oai_dc.xsd">
	<dc:title xml:lang="en-US">Minimizing the switching losses in the SiC MOSFET by using buried oxide</dc:title>
	<dc:creator>Mutlaq, Ali Hlal</dc:creator>
	<dc:creator>Faraj, Sura Hamad</dc:creator>
	<dc:creator>Zaidan, Majeed Rashid</dc:creator>
	<dc:creator>Hasan, Ghanim Thiab</dc:creator>
	<dc:creator>Names, Ahmed Saad</dc:creator>
	<dc:subject xml:lang="en-US">buried oxide; power loss; QGD; ron,sp; SiC MOSFET</dc:subject>
	<dc:description xml:lang="en-US">For optimizing the efficiency of the power switching devices, it is important to reduce the switching power losses. One method to minimize the switching power losses is to reduce the gate drain charge (QGD). In this paper, a 1.2 kV SiC MOSFET device with a buried oxide has been proposed to minimize QGD. The proposed design has been conducted by using the TCAD simulation program. The on-resistance (Ron,sp), QGD have been measured and analyzed based on the width and thickness of the buried oxide layer and compared with the measurement of traditional SiC MOSFET. The obtained results indicate that the QGD of 1.2 kV SiC MOSFET with buried oxide with WBO of 0.25 μm and TBO of 0.3 μm was reduced to about 31.3% which mean a minimize of power losses. The comparison results indicate that the proposed device with a buried oxide layer can be effectively used as an optimum solution for minimizing the power switching losses.</dc:description>
	<dc:publisher xml:lang="en-US">Institute of Advanced Engineering and Science</dc:publisher>
	<dc:contributor xml:lang="en-US"></dc:contributor>
	<dc:date>2025-09-01</dc:date>
	<dc:type>info:eu-repo/semantics/article</dc:type>
	<dc:type>info:eu-repo/semantics/publishedVersion</dc:type>
	<dc:type xml:lang="en-US"></dc:type>
	<dc:format>application/pdf</dc:format>
	<dc:identifier>https://ijape.iaescore.com/index.php/IJAPE/article/view/21537</dc:identifier>
	<dc:identifier>10.11591/ijape.v14.i3.pp613-619</dc:identifier>
	<dc:source xml:lang="en-US">International Journal of Applied Power Engineering (IJAPE); Vol 14, No 3: September 2025; 613-619</dc:source>
	<dc:source>2722-2624</dc:source>
	<dc:source>2252-8792</dc:source>
	<dc:source>10.11591/ijape.v14.i3</dc:source>
	<dc:language>eng</dc:language>
	<dc:relation>https://ijape.iaescore.com/index.php/IJAPE/article/view/21537/13342</dc:relation>
	<dc:rights xml:lang="en-US">Copyright (c) 2025 Ali Hlal Mutlaq, Sura Hamad Faraj, Majeed Rashid Zaidan, Ghanim Thiab Hasan, Ahmed Saad Names</dc:rights>
	<dc:rights xml:lang="en-US">http://creativecommons.org/licenses/by-sa/4.0</dc:rights>
</oai_dc:dc>