Melola Discovery

← Melola Discovery

Akses terbuka Jurnal SINTA 1

Analysis of Various Carriers Overlapping PWM Strategies for a Single Phase Ternary Multilevel Inverter

International Journal of Applied Power Engineering (IJAPE) · Vol. 7 No. 1 (2018) · hlm. 27–39

DOI
10.11591/ijape.v7.i1.pp27-39
ISSN
2722-2624, 2252-8792
Terbit
2018-04-01
Penerbit
Institute of Advanced Engineering and Science
Bahasa
eng
Lisensi
creativecommons.org/licenses/by-sa/4.0

Abstrak

Multilevel inverters are used in power conversion system due to improved voltage and current waveforms. This paper presents the comparison of various Carrier Overlapping Pulse Width Modulation (COPWM) Strategies for the three phase Cascaded Multi Level Inverter (CMLI). Various new schemes adopting the constant switching frequency and also variable switching frequency multicarrier control freedom degree combination concepts are developed and simulated for the chosen three phase CMLI. A single phase CMLI is controlled in this paper with Sinusoidal PWM (SPWM) reference along with Carrier Overlapping (CO) techniques and simulation is performed using MATLAB-SIMULINK. The variation of fundamental RMS output voltage and total harmonic distortion is observed for various carrier overlapping techniques. Among the various equal amplitude and unequal amplitude carriers carrier overlapping techniques such as COPWM-A, COPWM-B and COPWM-C, It is observed from Table 4 that all PWM method provides output with relative low distortion for equal amplitude carriers. If equal voltage sources are chosen then the THD will be less in the case of unequal amplitude carriers. But for the unequal voltage sources the THD is more in the case of unequal amplitude carriers. It is observed from simulation results that (Table-5) almost in all the strategies unequal amplitude carriers gives more fundamental RMS values compared to equal amplitude carriers. It is seen from table 6 that peak voltage is more in the case of unequal amplitude carriers compared to equal amplitude carriers. It is observed from the table 7 that dc components are less in both equal and unequal amplitude carriers.

Jaringan kolaborasi para penulis

17 penulis · 28 tautan kepenulisan bersama · 7 lintas organisasi

Arahkan kursor atau ketuk sebuah nama untuk menyorot rekan penulisnya. Klik dua kali untuk membuka halaman penulis.

  • Annamalai University
  • Karpagam Academy of Higher Education
  • Afiliasi tidak diketahui
  • Organisasi berbeda
  • Organisasi sama
  • Afiliasi tidak diketahui
  • Garis lebih tebal = lebih banyak artikel bersama · lingkaran lebih besar = lebih banyak artikel
Tampilkan sebagai tabel
Rekan penulisOrganisasiArtikel bersama
S.P. NatarajanAnnamalai University3
Ponnusamy VijayakumarKarpagam Academy of Higher Education2
T. S. AnandhiAnnamalai University2
B. ShanthiAnnamalai University2
Rajamanickam PazhanimuruganAnnamalai University2
T. SengolrajanKarpagam Academy of Higher Education1
V. PadmathilagamAnnamalai University1
A.N. AbiramiAfiliasi tidak diketahui1
D. MeenaAfiliasi tidak diketahui1
K. VijayalakshmiKarpagam Academy of Higher Education1
A. Clement RajAnnamalai University1
S. M. RevathyAfiliasi tidak diketahui1
K. Ramash KumarKarpagam Academy of Higher Education1
Arvind ThirumalaiKarpagam Academy of Higher Education1
T.S. AnandhiAnnamalai University1

Afiliasi berasal dari OpenAlex; metadata OAI-PMH jurnal tidak memuatnya. Penulis tanpa ID OpenAlex dicocokkan berdasarkan nama, sehingga dua orang bisa tergabung atau satu orang bisa terpisah.

Sumber metadata: OAI-PMH (metadata jurnal) http://ijape.iaescore.com/index.php/IJAPE/oai, pertama di-harvest 8 Nov 2026, terakhir terlihat 16 Nov 2026.
Metadata asli (oai_dc)
<oai_dc:dc xmlns="http://www.openarchives.org/OAI/2.0/" xmlns:dc="http://purl.org/dc/elements/1.1/" xmlns:oai_dc="http://www.openarchives.org/OAI/2.0/oai_dc/" xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance" xsi:schemaLocation="http://www.openarchives.org/OAI/2.0/oai_dc/  http://www.openarchives.org/OAI/2.0/oai_dc.xsd">
	<dc:title xml:lang="en-US">Analysis of Various Carriers Overlapping PWM Strategies for a Single Phase Ternary Multilevel Inverter</dc:title>
	<dc:creator>Balamurugan, C. R.</dc:creator>
	<dc:creator>Bensraj, R.</dc:creator>
	<dc:description xml:lang="en-US">Multilevel inverters are used in power conversion system due to improved voltage and current waveforms. This paper presents the comparison of various Carrier Overlapping Pulse Width Modulation (COPWM) Strategies for the three phase Cascaded Multi Level Inverter (CMLI). Various new schemes adopting the constant switching frequency and also variable switching frequency multicarrier control freedom degree combination concepts are developed and simulated for the chosen three phase CMLI. A single phase CMLI is controlled in this paper with Sinusoidal PWM (SPWM) reference along with Carrier Overlapping (CO) techniques and simulation is performed using MATLAB-SIMULINK. The variation of fundamental RMS output voltage and total harmonic distortion is observed for various carrier overlapping techniques. Among the various equal amplitude and unequal amplitude carriers carrier overlapping techniques such as COPWM-A, COPWM-B and COPWM-C, It is observed from Table 4 that all PWM method provides output with relative low distortion for equal amplitude carriers. If equal voltage sources are chosen then the THD will be less in the case of unequal amplitude carriers. But for the unequal voltage sources the THD is more in the case of unequal amplitude carriers.  It is observed from simulation results that (Table-5) almost in all the strategies unequal amplitude carriers gives more fundamental RMS values compared to equal amplitude carriers. It is seen from table 6 that peak voltage is more in the case of unequal amplitude carriers compared to equal amplitude carriers. It is observed from the table 7 that dc components are less in both equal and unequal amplitude carriers.</dc:description>
	<dc:publisher xml:lang="en-US">Institute of Advanced Engineering and Science</dc:publisher>
	<dc:contributor xml:lang="en-US"></dc:contributor>
	<dc:date>2018-04-01</dc:date>
	<dc:type>info:eu-repo/semantics/article</dc:type>
	<dc:type>info:eu-repo/semantics/publishedVersion</dc:type>
	<dc:type xml:lang="en-US"></dc:type>
	<dc:format>application/pdf</dc:format>
	<dc:identifier>https://ijape.iaescore.com/index.php/IJAPE/article/view/7422</dc:identifier>
	<dc:identifier>10.11591/ijape.v7.i1.pp27-39</dc:identifier>
	<dc:source xml:lang="en-US">International Journal of Applied Power Engineering (IJAPE); Vol 7, No 1: April 2018; 27-39</dc:source>
	<dc:source>2722-2624</dc:source>
	<dc:source>2252-8792</dc:source>
	<dc:source>10.11591/ijape.v7.i1</dc:source>
	<dc:language>eng</dc:language>
	<dc:relation>https://ijape.iaescore.com/index.php/IJAPE/article/view/7422/12106</dc:relation>
	<dc:rights xml:lang="en-US">Copyright (c) 2021 Institute of Advanced Engineering and Science</dc:rights>
	<dc:rights xml:lang="en-US">http://creativecommons.org/licenses/by-sa/4.0</dc:rights>
</oai_dc:dc>