Melola Discovery

← Melola Discovery

Akses terbuka Jurnal SINTA 1

Banana leaf wax performance as a coating material to reduce fouling and heat for photovoltaic improvement

International Journal of Applied Power Engineering (IJAPE) · Vol. 15 No. 3 (2026) · hlm. 1212–1222

DOI
10.11591/ijape.v15.i3.pp1212-1222
ISSN
2722-2624, 2252-8792
Terbit
2026-09-01
Penerbit
Institute of Advanced Engineering and Science
Bahasa
eng
Lisensi
creativecommons.org/licenses/by-sa/4.0

Abstrak

The growing dependence on limited fossil fuels and their environmental impact drive the adoption of renewable energy, with photovoltaics (PV) being a leading option. However, PV performance often declines due to elevated operating temperatures and surface fouling, especially in tropical climates, leading to reduced efficiency. To address this, coating materials with dual functionalities of cooling and self-cleaning are needed. This study investigates banana leaf wax as a natural coating to enhance PV performance. The wax was extracted using n-hexane, applied via spray-coating, and characterized through light transmittance tests, scanning electron microscope (SEM) imaging, water contact angle (WCA), adhesion analysis, and field trials on PV modules. The wax demonstrated an average WCA of 127°, with a microcrystalline structure supporting hydrophobic and self-cleaning properties. Field implementation showed that a 9 μm wax layer reduced PV module temperature by approximately 5 °C and increased output power by 15-20% under high irradiance (G ≈1200 W/m²). The cooling effect proved more significant than transmission losses, confirming the potential of banana leaf wax as an effective tropical PV coating. Nevertheless, further studies are required to optimize thickness, strengthen adhesion through hybrid formulations, and integrate the material into advanced optoelectronic coatings for sustainable efficiency improvements.

Kata kunci

Jaringan kolaborasi para penulis

24 penulis · 56 tautan kepenulisan bersama · 13 lintas organisasi

Arahkan kursor atau ketuk sebuah nama untuk menyorot rekan penulisnya. Klik dua kali untuk membuka halaman penulis.

  • Andalas University
  • Universitas Negeri Padang
  • Institut Teknologi Padang
  • Diponegoro University
  • National Institute of Technology Hamirpur
  • Afiliasi tidak diketahui
  • Organisasi berbeda
  • Organisasi sama
  • Afiliasi tidak diketahui
  • Garis lebih tebal = lebih banyak artikel bersama · lingkaran lebih besar = lebih banyak artikel
Tampilkan sebagai tabel
Rekan penulisOrganisasiArtikel bersama
Syafii SyafiiAndalas University7
Yudi ArfanAndalas University3
Axel DorizaAndalas University3
Krismadinata KrismadinataUniversitas Negeri Padang2
Muhammad Imran HamidAndalas University2
Zuriman AnthonyInstitut Teknologi Padang2
Hasmat MalikNational Institute of Technology Hamirpur2
Dendi Adi SaputraAndalas University2
Igo Cikal MuharramAndalas University2
Abdul RajabAndalas University1
Hanalde AndreAndalas University1
Baharuddin BaharuddinAndalas University1
Harry GumilangAfiliasi tidak diketahui1
Wahyu PrabowoAndalas University1
Syafii GhazaliAfiliasi tidak diketahui1
Andi M. Nur PutraAndalas University1
Adrianti AdriantiAndalas University1
Rizka AmaliaDiponegoro University1
Asnil AsnilAndalas University1
Muhammad NasirAndalas University1

Afiliasi berasal dari OpenAlex; metadata OAI-PMH jurnal tidak memuatnya. Penulis tanpa ID OpenAlex dicocokkan berdasarkan nama, sehingga dua orang bisa tergabung atau satu orang bisa terpisah.

Sumber metadata: OAI-PMH (metadata jurnal) http://ijape.iaescore.com/index.php/IJAPE/oai, pertama di-harvest 8 Nov 2026, terakhir terlihat 16 Nov 2026.
Metadata asli (oai_dc)
<oai_dc:dc xmlns="http://www.openarchives.org/OAI/2.0/" xmlns:dc="http://purl.org/dc/elements/1.1/" xmlns:oai_dc="http://www.openarchives.org/OAI/2.0/oai_dc/" xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance" xsi:schemaLocation="http://www.openarchives.org/OAI/2.0/oai_dc/  http://www.openarchives.org/OAI/2.0/oai_dc.xsd">
	<dc:title xml:lang="en-US">Banana leaf wax performance as a coating material to reduce fouling and heat for photovoltaic improvement</dc:title>
	<dc:creator>Pawawoi, Andi</dc:creator>
	<dc:creator>Nazir, Refdinal</dc:creator>
	<dc:creator>Hamid, Muhammad Imran</dc:creator>
	<dc:creator>Akbar, Fajril</dc:creator>
	<dc:subject xml:lang="en-US">energy renewable; hydrophobic; PV efficiency; temperature reducer; wax banana leaf</dc:subject>
	<dc:description xml:lang="en-US">The growing dependence on limited fossil fuels and their environmental impact drive the adoption of renewable energy, with photovoltaics (PV) being a leading option. However, PV performance often declines due to elevated operating temperatures and surface fouling, especially in tropical climates, leading to reduced efficiency. To address this, coating materials with dual functionalities of cooling and self-cleaning are needed. This study investigates banana leaf wax as a natural coating to enhance PV performance. The wax was extracted using n-hexane, applied via spray-coating, and characterized through light transmittance tests, scanning electron microscope (SEM) imaging, water contact angle (WCA), adhesion analysis, and field trials on PV modules. The wax demonstrated an average WCA of 127°, with a microcrystalline structure supporting hydrophobic and self-cleaning properties. Field implementation showed that a 9 μm wax layer reduced PV module temperature by approximately 5 °C and increased output power by 15-20% under high irradiance (G ≈1200 W/m²). The cooling effect proved more significant than transmission losses, confirming the potential of banana leaf wax as an effective tropical PV coating. Nevertheless, further studies are required to optimize thickness, strengthen adhesion through hybrid formulations, and integrate the material into advanced optoelectronic coatings for sustainable efficiency improvements.</dc:description>
	<dc:publisher xml:lang="en-US">Institute of Advanced Engineering and Science</dc:publisher>
	<dc:contributor xml:lang="en-US"></dc:contributor>
	<dc:date>2026-09-01</dc:date>
	<dc:type>info:eu-repo/semantics/article</dc:type>
	<dc:type>info:eu-repo/semantics/publishedVersion</dc:type>
	<dc:type xml:lang="en-US"></dc:type>
	<dc:format>application/pdf</dc:format>
	<dc:identifier>https://ijape.iaescore.com/index.php/IJAPE/article/view/22131</dc:identifier>
	<dc:identifier>10.11591/ijape.v15.i3.pp1212-1222</dc:identifier>
	<dc:source xml:lang="en-US">International Journal of Applied Power Engineering (IJAPE); Vol 15, No 3: September 2026; 1212-1222</dc:source>
	<dc:source>2722-2624</dc:source>
	<dc:source>2252-8792</dc:source>
	<dc:source>10.11591/ijape.v15.i3</dc:source>
	<dc:language>eng</dc:language>
	<dc:relation>https://ijape.iaescore.com/index.php/IJAPE/article/view/22131/13497</dc:relation>
	<dc:rights xml:lang="en-US">Copyright (c) 2026 Andi Pawawoi, Refdinal Nazir, Muhammad Imran Hamid, Fajril Akbar</dc:rights>
	<dc:rights xml:lang="en-US">http://creativecommons.org/licenses/by-sa/4.0</dc:rights>
</oai_dc:dc>