Melola Discovery

← Melola Discovery

Akses terbuka Jurnal SINTA 1

Battery charger regulator with fully controlled return 15 V/5 A in uninterruptible power supply

International Journal of Applied Power Engineering (IJAPE) · Vol. 13 No. 1 (2024) · hlm. 45–51

DOI
10.11591/ijape.v13.i1.pp45-51
ISSN
2722-2624, 2252-8792
Terbit
2024-03-01
Penerbit
Institute of Advanced Engineering and Science
Bahasa
eng
Lisensi
creativecommons.org/licenses/by-sa/4.0

Abstrak

Fully controlled rectifier and BCR. The battery charge regulator (BCR) is the most important unit of an uninterruptible power supply (UPS) device. The BCR uses a 15 V/5 A transformer to lower the voltage so as not to overload the BCR components. Full control using four thyristors serves to supply voltage to the BCR, while the BCR serves to regulate battery charging. Forcing the battery to be charged at a constant voltage with the same current results in shorter battery life. Battery charging through the BCR is set to match the battery voltage, then allowing the BCR to control it by adjusting the phase voltage to 13.5 V for high voltage discharge (HVD) and 10.5 V for low voltage discharge (LVD). By using an IC Regulator combined with a relay as a voltage breaker for a fully charged battery, it will automatically disconnect to avoid overcharging the battery. Based on the performance test results of a fully controlled rectifier system using thyristors and BCR on a 12V/5Ah battery, the output voltage is as a fully controlled 12 V rectifier, the BCR switch can charge the internal battery in minutes with a current that varies between 2.1 A to 0.1 A.

Kata kunci

Jaringan kolaborasi para penulis

40 penulis · 156 tautan kepenulisan bersama · 40 lintas organisasi · menampilkan 40 yang paling banyak terhubung

Arahkan kursor atau ketuk sebuah nama untuk menyorot rekan penulisnya. Klik dua kali untuk membuka halaman penulis.

  • Malikussaleh University
  • University of Mataram
  • Lampung University
  • Universitas Tidar
  • Universiti Malaysia Perlis
  • Udayana University
  • Universitas Halu Oleo
  • Organisasi lain
  • Afiliasi tidak diketahui
  • Organisasi berbeda
  • Organisasi sama
  • Afiliasi tidak diketahui
  • Garis lebih tebal = lebih banyak artikel bersama · lingkaran lebih besar = lebih banyak artikel
Tampilkan sebagai tabel
Rekan penulisOrganisasiArtikel bersama
Misbahul JannahMalikussaleh University9
Widyana Verawaty SiregarMalikussaleh University8
Fahrian RoidMalikussaleh University6
Armen AbtaMalikussaleh University6
Agung Budi MuljonoUniversity of Mataram5
I Made GinarsaUniversity of Mataram5
Muzamir IsaUniversiti Malaysia Perlis4
Sultan SultanUniversity of Mataram3
Sapto NisworoUniversitas Tidar3
Zara YunizarMalikussaleh University3
Asran AsranMalikussaleh University3
Nura UsrinaMalikussaleh University3
Nuryawan NuryawanMalikussaleh University3
Muhammad SayutiMalikussaleh University3
Ferdy HidayatullahMalikussaleh University3
Azmi AzmiAfiliasi tidak diketahui3
Azman AzmanAfiliasi tidak diketahui3
Osea ZebuaLampung University2
Farhan AkbarMalikussaleh University2
Selamat MelialaMalikussaleh University2
Rosdiana RosdianaMalikussaleh University2
Raihan PutriMalikussaleh University2
Ediwan EdiwanMalikussaleh University2
Abubakar DabetMalikussaleh University2
Fajar Syahbakti LukmanAfiliasi tidak diketahui2
Gandi SupriadiInstitut Teknologi PLN2
Muhammad MuhammadMalikussaleh University2
Agus DharmaUdayana University1
Sabar NababanUniversity of Mataram1
Fauzi Sahlan Rizki SinagaMalikussaleh University1
Rosdiana RosdianaMalikussaleh University1
Asran AsranUniversitas Halu Oleo1
Aldi Fadilah IsmaMalikussaleh University1
Misriana MisrianaPoliteknik Negeri Lhokseumawe1

Afiliasi berasal dari OpenAlex; metadata OAI-PMH jurnal tidak memuatnya. Penulis tanpa ID OpenAlex dicocokkan berdasarkan nama, sehingga dua orang bisa tergabung atau satu orang bisa terpisah.

Sumber metadata: OAI-PMH (metadata jurnal) http://ijape.iaescore.com/index.php/IJAPE/oai, pertama di-harvest 8 Nov 2026, terakhir terlihat 16 Nov 2026.
Metadata asli (oai_dc)
<oai_dc:dc xmlns="http://www.openarchives.org/OAI/2.0/" xmlns:dc="http://purl.org/dc/elements/1.1/" xmlns:oai_dc="http://www.openarchives.org/OAI/2.0/oai_dc/" xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance" xsi:schemaLocation="http://www.openarchives.org/OAI/2.0/oai_dc/  http://www.openarchives.org/OAI/2.0/oai_dc.xsd">
	<dc:title xml:lang="en-US">Battery charger regulator with fully controlled return 15 V/5 A in uninterruptible power supply</dc:title>
	<dc:creator>Hasibuan, Arnawan</dc:creator>
	<dc:creator>Daud, Muhammad</dc:creator>
	<dc:creator>Hutagalung, Rizki Shobirin</dc:creator>
	<dc:creator>Kartika, Kartika</dc:creator>
	<dc:creator>Nrartha, I Made Ari</dc:creator>
	<dc:creator>Almunadiansyah, Rizky</dc:creator>
	<dc:subject xml:lang="en-US">battery charger control; IC controller; rectifier; regulator; uninterruptible power supply</dc:subject>
	<dc:description xml:lang="en-US">Fully controlled rectifier and BCR. The battery charge regulator (BCR) is the most important unit of an uninterruptible power supply (UPS) device. The BCR uses a 15 V/5 A transformer to lower the voltage so as not to overload the BCR components. Full control using four thyristors serves to supply voltage to the BCR, while the BCR serves to regulate battery charging. Forcing the battery to be charged at a constant voltage with the same current results in shorter battery life. Battery charging through the BCR is set to match the battery voltage, then allowing the BCR to control it by adjusting the phase voltage to 13.5 V for high voltage discharge (HVD) and 10.5 V for low voltage discharge (LVD). By using an IC Regulator combined with a relay as a voltage breaker for a fully charged battery, it will automatically disconnect to avoid overcharging the battery. Based on the performance test results of a fully controlled rectifier system using thyristors and BCR on a 12V/5Ah battery, the output voltage is as a fully controlled 12 V rectifier, the BCR switch can charge the internal battery in minutes with a current that varies between 2.1 A to 0.1 A.</dc:description>
	<dc:publisher xml:lang="en-US">Institute of Advanced Engineering and Science</dc:publisher>
	<dc:contributor xml:lang="en-US"></dc:contributor>
	<dc:date>2024-03-01</dc:date>
	<dc:type>info:eu-repo/semantics/article</dc:type>
	<dc:type>info:eu-repo/semantics/publishedVersion</dc:type>
	<dc:type xml:lang="en-US"></dc:type>
	<dc:format>application/pdf</dc:format>
	<dc:identifier>https://ijape.iaescore.com/index.php/IJAPE/article/view/20687</dc:identifier>
	<dc:identifier>10.11591/ijape.v13.i1.pp45-51</dc:identifier>
	<dc:source xml:lang="en-US">International Journal of Applied Power Engineering (IJAPE); Vol 13, No 1: March 2024; 45-51</dc:source>
	<dc:source>2722-2624</dc:source>
	<dc:source>2252-8792</dc:source>
	<dc:source>10.11591/ijape.v13.i1</dc:source>
	<dc:language>eng</dc:language>
	<dc:relation>https://ijape.iaescore.com/index.php/IJAPE/article/view/20687/13145</dc:relation>
	<dc:relation>https://ijape.iaescore.com/index.php/IJAPE/article/downloadSuppFile/20687/2865</dc:relation>
	<dc:relation>https://ijape.iaescore.com/index.php/IJAPE/article/downloadSuppFile/20687/2899</dc:relation>
	<dc:rights xml:lang="en-US">Copyright (c) 2023 Arnawan Hasibuan</dc:rights>
	<dc:rights xml:lang="en-US">http://creativecommons.org/licenses/by-sa/4.0</dc:rights>
</oai_dc:dc>