Melola Discovery

← Melola Discovery

Akses terbuka Jurnal SINTA 1

Development of manufacturing engineering program of Bulacan State University using employability tracer study

International Journal of Evaluation and Research in Education (IJERE) · Vol. 13 No. 3 (2024) · hlm. 1970–1978

DOI
10.11591/ijere.v13i3.27275
ISSN
2620-5440, 2252-8822
Terbit
2024-06-01
Penerbit
Institute of Advanced Engineering and Science
Bahasa
eng
Lisensi
creativecommons.org/licenses/by-nc/4.0

Abstrak

Tracer study is one of the continuous quality improvement tools for curriculum development. The graduates are invited to answer the tracer form to determine their employability. Since the Manufacturing Engineering program in Bulacan State University (BuLSU) is the youngest engineering program, there is minimal data on graduates available, especially on the details of their first jobs, such as the first job related to the program, time taken to land their first job, gross monthly salary, and learning competencies. The demographic profile of the manufacturing engineering graduates from 2015 to 2019 is preserved and remains strictly confidential for the safety of their identification. Correspondingly, the study applied a cross-sectional retrospective survey method. Moreover, 67.41% of manufacturing engineering graduates responded. The employment rate of manufacturing engineering graduates was 93.38%, whereas regular or permanent in their current employment was 84.40%. Furthermore, data show that they are employed within less than a month, 50.97% of responses. Lastly, the primary learning competency that manufacturing engineering graduates consider is critical thinking skills, with a response rate of 86.11%, followed by problem-solving skills, with 81.94% responses, while third was communication skills, with a rate of 78.08%. Ultimately, the recommendations for further curriculum and program improvement are exhibited.

Kata kunci

Jaringan kolaborasi para penulis

2 penulis · 1 tautan kepenulisan bersama

Arahkan kursor atau ketuk sebuah nama untuk menyorot rekan penulisnya. Klik dua kali untuk membuka halaman penulis.

  • Bulacan State University
  • Organisasi berbeda
  • Organisasi sama
  • Afiliasi tidak diketahui
  • Garis lebih tebal = lebih banyak artikel bersama · lingkaran lebih besar = lebih banyak artikel
Tampilkan sebagai tabel
Rekan penulisOrganisasiArtikel bersama

Afiliasi berasal dari OpenAlex; metadata OAI-PMH jurnal tidak memuatnya. Penulis tanpa ID OpenAlex dicocokkan berdasarkan nama, sehingga dua orang bisa tergabung atau satu orang bisa terpisah.

Sumber metadata: OAI-PMH (metadata jurnal) http://ijere.iaescore.com/index.php/IJERE/oai, pertama di-harvest 8 Nov 2026, terakhir terlihat 16 Nov 2026.
Metadata asli (oai_dc)
<oai_dc:dc xmlns="http://www.openarchives.org/OAI/2.0/" xmlns:dc="http://purl.org/dc/elements/1.1/" xmlns:oai_dc="http://www.openarchives.org/OAI/2.0/oai_dc/" xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance" xsi:schemaLocation="http://www.openarchives.org/OAI/2.0/oai_dc/  http://www.openarchives.org/OAI/2.0/oai_dc.xsd">
	<dc:title xml:lang="en-US">Development of manufacturing engineering program of Bulacan State University using employability tracer study</dc:title>
	<dc:creator>Bual, Cyrus Lawrence Camancho</dc:creator>
	<dc:creator>Bual, Rachel Cunanan</dc:creator>
	<dc:subject xml:lang="en-US">Continuous quality improvement; Curriculum; Employability; Manufacturing engineering; Tracer study</dc:subject>
	<dc:description xml:lang="en-US">Tracer study is one of the continuous quality improvement tools for curriculum development. The graduates are invited to answer the tracer form to determine their employability. Since the Manufacturing Engineering program in Bulacan State University (BuLSU) is the youngest engineering program, there is minimal data on graduates available, especially on the details of their first jobs, such as the first job related to the program, time taken to land their first job, gross monthly salary, and learning competencies. The demographic profile of the manufacturing engineering graduates from 2015 to 2019 is preserved and remains strictly confidential for the safety of their identification. Correspondingly, the study applied a cross-sectional retrospective survey method. Moreover, 67.41% of manufacturing engineering graduates responded. The employment rate of manufacturing engineering graduates was 93.38%, whereas regular or permanent in their current employment was 84.40%. Furthermore, data show that they are employed within less than a month, 50.97% of responses. Lastly, the primary learning competency that manufacturing engineering graduates consider is critical thinking skills, with a response rate of 86.11%, followed by problem-solving skills, with 81.94% responses, while third was communication skills, with a rate of 78.08%. Ultimately, the recommendations for further curriculum and program improvement are exhibited.</dc:description>
	<dc:publisher xml:lang="en-US">Institute of Advanced Engineering and Science</dc:publisher>
	<dc:contributor xml:lang="en-US"></dc:contributor>
	<dc:date>2024-06-01</dc:date>
	<dc:type>info:eu-repo/semantics/article</dc:type>
	<dc:type>info:eu-repo/semantics/publishedVersion</dc:type>
	<dc:type xml:lang="en-US"></dc:type>
	<dc:format>application/pdf</dc:format>
	<dc:identifier>https://ijere.iaescore.com/index.php/IJERE/article/view/27275</dc:identifier>
	<dc:identifier>10.11591/ijere.v13i3.27275</dc:identifier>
	<dc:source xml:lang="en-US">International Journal of Evaluation and Research in Education (IJERE); Vol 13, No 3: June 2024; 1970-1978</dc:source>
	<dc:source>2620-5440</dc:source>
	<dc:source>2252-8822</dc:source>
	<dc:source>10.11591/ijere.v13i3</dc:source>
	<dc:language>eng</dc:language>
	<dc:relation>https://ijere.iaescore.com/index.php/IJERE/article/view/27275/13952</dc:relation>
	<dc:rights xml:lang="en-US">Copyright (c) 2024 Institute of Advanced Engineering and Science</dc:rights>
	<dc:rights xml:lang="en-US">http://creativecommons.org/licenses/by-nc/4.0</dc:rights>
</oai_dc:dc>