Melola Discovery

← Melola Discovery

Akses terbuka Jurnal SINTA 1

Designing and performance investigation of permanent magnet motor prototype for UTV electric drive train application

International Journal of Power Electronics and Drive Systems · Vol. 12 No. 4 (2021) · hlm. 2018–2029

DOI
10.11591/ijpeds.v12.i4.pp2018-2029
ISSN
2722-256X, 2088-8694
Terbit
2021-12-01
Penerbit
Institute of Advanced Engineering and Science
Bahasa
eng
Lisensi
creativecommons.org/licenses/by-sa/4.0

Abstrak

The dynamic design specifications of a vehicle are used to define the required torque and speed of a permanent magnet motor. This is due to providing clear instructions on the intent, performance, and construction of a vehicle. Therefore, this study aims to determine an engineering design and prototyping process of a Permanent Magnet Motor, to be used as an electric powertrain in a Utility Vehicle. Based on being used in severe road condition (steep inclination and off road), the vehicle should be able to handle a 45° inclination with total payload of approximately 250 kg. Using a rear-wheel-drive traction, its weight should also be less than 1000 kg. Furthermore, the motor should be operated at a maximum battery voltage of 100 V. According to the requirements, the electric powertrain should further have the ability to deliver a torque of approximately 1600 Nm on both rear wheels. Using a finite element method to simulate performances, transmission was coupled to the motor in providing the required torque. In addition, the motor prototype was subsequently manufactured and tested using a dynamometer. The results showed that the motor produced 19.6 kW, 5600 RPM, and 75 Nm at 96 V. Therefore, the design and prototyping process of the motor satisfied all the required specification.

Kata kunci

Jaringan kolaborasi para penulis

32 penulis · 100 tautan kepenulisan bersama · 2 lintas organisasi

Arahkan kursor atau ketuk sebuah nama untuk menyorot rekan penulisnya. Klik dua kali untuk membuka halaman penulis.

  • Institut Teknologi Sepuluh Nopember
  • Universitas Airlangga
  • National Research and Innovation Agency
  • Diponegoro University
  • Afiliasi tidak diketahui
  • Organisasi berbeda
  • Organisasi sama
  • Afiliasi tidak diketahui
  • Garis lebih tebal = lebih banyak artikel bersama · lingkaran lebih besar = lebih banyak artikel
Tampilkan sebagai tabel
Rekan penulisOrganisasiArtikel bersama
Daniar FahmiInstitut Teknologi Sepuluh Nopember2
Muhammad Fadlan AkbarInstitut Teknologi Sepuluh Nopember2
I Gusti Ngurah Satriyadi HernandaInstitut Teknologi Sepuluh Nopember2
Risyad Alauddin ZaidanInstitut Teknologi Sepuluh Nopember2
Arkan FadhilahInstitut Teknologi Sepuluh Nopember2
Prisma MegantoroUniversitas Airlangga2
Lilik Jamilatul AwalinUniversitas Airlangga2
I Nyoman SutantraAfiliasi tidak diketahui2
Agus MukhlisinAfiliasi tidak diketahui2
Estiko RijantoAfiliasi tidak diketahui2
Adi SoeprijantoInstitut Teknologi Sepuluh Nopember1
Ni Ketut AryaniInstitut Teknologi Sepuluh Nopember1
Mat Syai’inInstitut Teknologi Sepuluh Nopember1
Heri NugrahaNational Research and Innovation Agency1
Asep Dadan HermawanNational Research and Innovation Agency1
Andhika PrastawaAfiliasi tidak diketahui1
Cuk Supriadi Ali NandarAfiliasi tidak diketahui1
Nur Aryanto AryonoAfiliasi tidak diketahui1
Dio Randa DamaraAfiliasi tidak diketahui1
Dwie Vannia DiantiAfiliasi tidak diketahui1
Sutikno SutiknoDiponegoro University1
Darminto DarmintoAfiliasi tidak diketahui1
Rakhasoni Firman SyahAfiliasi tidak diketahui1
Abdullah ShahabAfiliasi tidak diketahui1
Imam MukhlashInstitut Teknologi Sepuluh Nopember1
Mohammad IqbalAfiliasi tidak diketahui1
Joko SupriyonoAfiliasi tidak diketahui1

Afiliasi berasal dari OpenAlex; metadata OAI-PMH jurnal tidak memuatnya. Penulis tanpa ID OpenAlex dicocokkan berdasarkan nama, sehingga dua orang bisa tergabung atau satu orang bisa terpisah.

Sumber metadata: OAI-PMH (metadata jurnal) http://ijpeds.iaescore.com/index.php/IJPEDS/oai, pertama di-harvest 8 Nov 2026, terakhir terlihat 8 Nov 2026.
Metadata asli (oai_dc) 
<oai_dc:dc xmlns="http://www.openarchives.org/OAI/2.0/" xmlns:dc="http://purl.org/dc/elements/1.1/" xmlns:oai_dc="http://www.openarchives.org/OAI/2.0/oai_dc/" xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance" xsi:schemaLocation="http://www.openarchives.org/OAI/2.0/oai_dc/  http://www.openarchives.org/OAI/2.0/oai_dc.xsd">
	<dc:title xml:lang="en-US">Designing and performance investigation of permanent magnet motor prototype for UTV electric drive train application</dc:title>
	<dc:creator>Yuniarto, Muhammad Nur</dc:creator>
	<dc:creator>Nugraha, Yoga Uta</dc:creator>
	<dc:creator>Negara, I Made Yulistya</dc:creator>
	<dc:creator>Asfani, Dimas Anton</dc:creator>
	<dc:creator>Sidharta, Indra</dc:creator>
	<dc:subject xml:lang="en-US">Design; Permanent magnet motor; Prototype; Testing; Utility vehicle</dc:subject>
	<dc:description xml:lang="en-US">The dynamic design specifications of a vehicle are used to define the required torque and speed of a permanent magnet motor. This is due to providing clear instructions on the intent, performance, and construction of a vehicle. Therefore, this study aims to determine an engineering design and prototyping process of a Permanent Magnet Motor, to be used as an electric powertrain in a Utility Vehicle. Based on being used in severe road condition (steep inclination and off road), the vehicle should be able to handle a 45° inclination with total payload of approximately 250 kg. Using a rear-wheel-drive traction, its weight should also be less than 1000 kg. Furthermore, the motor should be operated at a maximum battery voltage of 100 V. According to the requirements, the electric powertrain should further have the ability to deliver a torque of approximately 1600 Nm on both rear wheels. Using a finite element method to simulate performances, transmission was coupled to the motor in providing the required torque. In addition, the motor prototype was subsequently manufactured and tested using a dynamometer. The results showed that the motor produced 19.6 kW, 5600 RPM, and 75 Nm at 96 V. Therefore, the design and prototyping process of the motor satisfied all the required specification.</dc:description>
	<dc:publisher xml:lang="en-US">Institute of Advanced Engineering and Science</dc:publisher>
	<dc:contributor xml:lang="en-US"></dc:contributor>
	<dc:date>2021-12-01</dc:date>
	<dc:type>info:eu-repo/semantics/article</dc:type>
	<dc:type>info:eu-repo/semantics/publishedVersion</dc:type>
	<dc:type xml:lang="en-US"></dc:type>
	<dc:format>application/pdf</dc:format>
	<dc:identifier>https://ijpeds.iaescore.com/index.php/IJPEDS/article/view/21510</dc:identifier>
	<dc:identifier>10.11591/ijpeds.v12.i4.pp2018-2029</dc:identifier>
	<dc:source xml:lang="en-US">International Journal of Power Electronics and Drive Systems (IJPEDS); Vol 12, No 4: December 2021; 2018-2029</dc:source>
	<dc:source>2722-256X</dc:source>
	<dc:source>2088-8694</dc:source>
	<dc:source>10.11591/ijpeds.v12.i4</dc:source>
	<dc:language>eng</dc:language>
	<dc:relation>https://ijpeds.iaescore.com/index.php/IJPEDS/article/view/21510/13568</dc:relation>
	<dc:rights xml:lang="en-US">Copyright (c) 2021 Muhammad Nur Yuniarto, Yoga Uta Nugraha, I Made Yulistya Negara, Dimas Anton Asfani, Indra Sidharta</dc:rights>
	<dc:rights xml:lang="en-US">http://creativecommons.org/licenses/by-sa/4.0</dc:rights>
</oai_dc:dc>