This paper proposes an algorithm of Smart household energy systems to anticipate fault conditions in power system grid. Single phase PV grid-connected in smart household energy system is a smart system that determines electrical supply conditions to the load in residential electrical system. The smart system is consisted of two voltage source, conventional electricity system from national electricity provider as preferred source and photovoltaic as the alternative source. In smart system, fault conditions can be anticipated by selecting the appropriate voltage sources to supply the load. The condition of smart system can be described in power flow regulation to the load by detection and identification of amplitude, phase angle, and frequency of the voltage source compared to the system reference. The system mechanism is based on detection of voltage source using static transfer switch (STS) with phase locked loop (PLL) as voltage detection algorithm which output is used to determine decision logic algorithm for switching conditions. The results show that conditions of smart power system flow can be obtained based on voltage source selection in decision logic when fault condition occurs.DOI: http://dx.doi.org/10.11591/ijpeds.v4i1.5368
Jaringan kolaborasi para penulis
17 penulis ·
33 tautan kepenulisan bersama
· 2 lintas organisasi
Arahkan kursor atau ketuk sebuah nama untuk menyorot rekan penulisnya. Klik dua kali untuk membuka halaman penulis.
University of Indonesia
Universitas Muhammadiyah Jakarta
Afiliasi tidak diketahui
Organisasi berbeda
Organisasi sama
Afiliasi tidak diketahui
Garis lebih tebal = lebih banyak artikel bersama · lingkaran lebih besar = lebih banyak artikel
Afiliasi berasal dari OpenAlex; metadata OAI-PMH jurnal tidak memuatnya. Penulis tanpa ID OpenAlex dicocokkan berdasarkan nama, sehingga dua orang bisa tergabung atau satu orang bisa terpisah.