Melola Discovery

← Melola Discovery

Akses terbuka Jurnal SINTA 1

Control strategy comparison of the 8/6 switched reluctance motor in several inverter topologies

International Journal of Power Electronics and Drive Systems · Vol. 16 No. 1 (2025) · hlm. 117–128

DOI
10.11591/ijpeds.v16.i1.pp117-128
ISSN
2722-256X, 2088-8694
Terbit
2025-03-01
Penerbit
Institute of Advanced Engineering and Science
Bahasa
eng
Lisensi
creativecommons.org/licenses/by-sa/4.0

Abstrak

This paper proposes a control strategy for switched reluctance motors (SRMs) using the asymmetric half-bridge (AHB), shared switch, and Miller converter based on MATLAB/Simulink and TMS320F28379D. The control strategy implemented in this study involves the application of proportional-integral (PI) speed control with a pulse width modulation (PWM) switching method for each topology. By employing this control strategy, the system aims to regulate the speed of the motor and achieve the desired performance while ensuring efficient power utilization. The PI controller is utilized to adjust the motor's speed based on the error between the desired and actual speeds, enabling precise control. Additionally, the PWM switching method is employed to modulate the motor voltage, allowing for smooth and continuous speed adjustments. A thorough method for maximizing each topology's performance and raising the overall system efficiency is provided by this combination of control techniques. The detailed analysis and operation of each converter are presented in this paper. Simulation and experiment results show that AHB and shared switch have better performance than Miller. But the Miller converter needs the least number of switching components. Although the performance of the shared switch is equal to that of AHB, uses of this topology are limited to SRM with an even number of phases.

Kata kunci

Jaringan kolaborasi para penulis

25 penulis · 70 tautan kepenulisan bersama · 8 lintas organisasi

Arahkan kursor atau ketuk sebuah nama untuk menyorot rekan penulisnya. Klik dua kali untuk membuka halaman penulis.

  • Bandung Institute of Technology
  • National Research and Innovation Agency
  • Organisasi berbeda
  • Organisasi sama
  • Afiliasi tidak diketahui
  • Garis lebih tebal = lebih banyak artikel bersama · lingkaran lebih besar = lebih banyak artikel
Tampilkan sebagai tabel
Rekan penulisOrganisasiArtikel bersama
Pekik Argo DahonoBandung Institute of Technology10
Sulistyo WijanarkoNational Research and Innovation Agency4
Gifari Iswandi HasyimBandung Institute of Technology4
Nungky PrameswariBandung Institute of Technology3
Anand Bannet GanesenBandung Institute of Technology3
Falah Kharisma NurazizBandung Institute of Technology3
Arief Syaichu RohmanBandung Institute of Technology2
Adnan Rafi Al TahtawiBandung Institute of Technology2
Anwar MuqorobinNational Research and Innovation Agency2
Nabil DriantamaBandung Institute of Technology2
Andriazis DahonoBandung Institute of Technology2
Ridha D. N. AditamaBandung Institute of Technology2
Naqita RamadhaniBandung Institute of Technology2
Muhammad Farras MuzakkiBandung Institute of Technology2
Ro’ad Baladi Al KomarBandung Institute of Technology1
Pranoto Hidaya RusminBandung Institute of Technology1
Pranoto Hidaya RusminBandung Institute of Technology1
Deni DeniBandung Institute of Technology1
Dessy AmirudinBandung Institute of Technology1

Afiliasi berasal dari OpenAlex; metadata OAI-PMH jurnal tidak memuatnya. Penulis tanpa ID OpenAlex dicocokkan berdasarkan nama, sehingga dua orang bisa tergabung atau satu orang bisa terpisah.

Sumber metadata: OAI-PMH (metadata jurnal) http://ijpeds.iaescore.com/index.php/IJPEDS/oai, pertama di-harvest 8 Nov 2026, terakhir terlihat 8 Nov 2026.
Metadata asli (oai_dc)
<oai_dc:dc xmlns="http://www.openarchives.org/OAI/2.0/" xmlns:dc="http://purl.org/dc/elements/1.1/" xmlns:oai_dc="http://www.openarchives.org/OAI/2.0/oai_dc/" xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance" xsi:schemaLocation="http://www.openarchives.org/OAI/2.0/oai_dc/  http://www.openarchives.org/OAI/2.0/oai_dc.xsd">
	<dc:title xml:lang="en-US">Control strategy comparison of the 8/6 switched reluctance motor in several inverter topologies</dc:title>
	<dc:creator>Martua, Ronaldo</dc:creator>
	<dc:creator>Emir, Alam Raihan</dc:creator>
	<dc:creator>Suhendra, Michael</dc:creator>
	<dc:creator>Yesayevtta, Denri</dc:creator>
	<dc:creator>Rizqiawan, Arwindra</dc:creator>
	<dc:creator>Furqani, Jihad</dc:creator>
	<dc:subject xml:lang="en-US">asymmetric half bridge; Miller; proportional-integral control; pulse with modulation; shared switch</dc:subject>
	<dc:description xml:lang="en-US">This paper proposes a control strategy for switched reluctance motors (SRMs) using the asymmetric half-bridge (AHB), shared switch, and Miller converter based on MATLAB/Simulink and TMS320F28379D. The control strategy implemented in this study involves the application of proportional-integral (PI) speed control with a pulse width modulation (PWM) switching method for each topology. By employing this control strategy, the system aims to regulate the speed of the motor and achieve the desired performance while ensuring efficient power utilization. The PI controller is utilized to adjust the motor's speed based on the error between the desired and actual speeds, enabling precise control. Additionally, the PWM switching method is employed to modulate the motor voltage, allowing for smooth and continuous speed adjustments. A thorough method for maximizing each topology's performance and raising the overall system efficiency is provided by this combination of control techniques. The detailed analysis and operation of each converter are presented in this paper. Simulation and experiment results show that AHB and shared switch have better performance than Miller. But the Miller converter needs the least number of switching components. Although the performance of the shared switch is equal to that of AHB, uses of this topology are limited to SRM with an even number of phases.</dc:description>
	<dc:publisher xml:lang="en-US">Institute of Advanced Engineering and Science</dc:publisher>
	<dc:contributor xml:lang="en-US"></dc:contributor>
	<dc:date>2025-03-01</dc:date>
	<dc:type>info:eu-repo/semantics/article</dc:type>
	<dc:type>info:eu-repo/semantics/publishedVersion</dc:type>
	<dc:type xml:lang="en-US"></dc:type>
	<dc:format>application/pdf</dc:format>
	<dc:identifier>https://ijpeds.iaescore.com/index.php/IJPEDS/article/view/23452</dc:identifier>
	<dc:identifier>10.11591/ijpeds.v16.i1.pp117-128</dc:identifier>
	<dc:source xml:lang="en-US">International Journal of Power Electronics and Drive Systems (IJPEDS); Vol 16, No 1: March 2025; 117-128</dc:source>
	<dc:source>2722-256X</dc:source>
	<dc:source>2088-8694</dc:source>
	<dc:source>10.11591/ijpeds.v16.i1</dc:source>
	<dc:language>eng</dc:language>
	<dc:relation>https://ijpeds.iaescore.com/index.php/IJPEDS/article/view/23452/14838</dc:relation>
	<dc:rights xml:lang="en-US">Copyright (c) 2025 Ronaldo Martua</dc:rights>
	<dc:rights xml:lang="en-US">http://creativecommons.org/licenses/by-sa/4.0</dc:rights>
</oai_dc:dc>