Melola Discovery

← Melola Discovery

Akses terbuka Jurnal SINTA 1

Analytical design, modelling and simulation of an LLC resonant converter for an electric vehicle auxiliary power module

International Journal of Power Electronics and Drive Systems · Vol. 17 No. 3 (2026) · hlm. 1885–1901

DOI
10.11591/ijpeds.v17.i3.pp1885-1901
ISSN
2722-256X, 2088-8694
Terbit
2026-09-01
Penerbit
Institute of Advanced Engineering and Science
Bahasa
eng
Lisensi
creativecommons.org/licenses/by-sa/4.0

Abstrak

This paper presents an analytical design, modelling, and simulation of an LLC resonant converter for an electric vehicle auxiliary power module (APM). The work contributes a complete LLC‑focused workflow that starts from design specifications and proceeds through: i) Resonant‑tank selection using normalized gain–frequency maps to choose the inductance ratio Ln and a quality factor Qe with soft‑switching in mind; ii) Transformer sizing from core data and loss limits; and iii) Small‑signal‑based PI controller tuning those accounts for the plant’s inherent inversion. The workflow is implemented and validated in MATLAB Simulink and PLECS for input voltages of 235-265 V and load levels from 10% to 100%. The converter achieves a peak efficiency of 98.1% within an 80.6-128.3 kHz switching range, full‑load efficiency of 93.5%, and about ±1% output voltage regulation. The controller maintains stable output settling times of 0.42-0.44 ms during 100% to 80% load steps and the reverse transition. At the highest input voltage, the switching frequency drifts beyond the intended range, which indicates a clear target for controller refinement in future work. The results show that the proposed analytical workflow is practical for designing LLC converters that meet APM efficiency and regulation goals, with cross‑platform simulation providing consistent evidence of performance.

Kata kunci

Jaringan kolaborasi para penulis

5 penulis · 10 tautan kepenulisan bersama · 4 lintas organisasi

Arahkan kursor atau ketuk sebuah nama untuk menyorot rekan penulisnya. Klik dua kali untuk membuka halaman penulis.

  • Asia Pacific University of Technology & Innovation
  • University of Botswana
  • Organisasi berbeda
  • Organisasi sama
  • Afiliasi tidak diketahui
  • Garis lebih tebal = lebih banyak artikel bersama · lingkaran lebih besar = lebih banyak artikel
Tampilkan sebagai tabel
Rekan penulisOrganisasiArtikel bersama

Afiliasi berasal dari OpenAlex; metadata OAI-PMH jurnal tidak memuatnya. Penulis tanpa ID OpenAlex dicocokkan berdasarkan nama, sehingga dua orang bisa tergabung atau satu orang bisa terpisah.

Sumber metadata: OAI-PMH (metadata jurnal) http://ijpeds.iaescore.com/index.php/IJPEDS/oai, pertama di-harvest 8 Nov 2026, terakhir terlihat 16 Nov 2026.
Metadata asli (oai_dc)
<oai_dc:dc xmlns="http://www.openarchives.org/OAI/2.0/" xmlns:dc="http://purl.org/dc/elements/1.1/" xmlns:oai_dc="http://www.openarchives.org/OAI/2.0/oai_dc/" xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance" xsi:schemaLocation="http://www.openarchives.org/OAI/2.0/oai_dc/  http://www.openarchives.org/OAI/2.0/oai_dc.xsd">
	<dc:title xml:lang="en-US">Analytical design, modelling and simulation of an LLC resonant converter for an electric vehicle auxiliary power module</dc:title>
	<dc:creator>Noh, Mohamad Affan Mohd</dc:creator>
	<dc:creator>Ravina, Jacques Juicy Patureau</dc:creator>
	<dc:creator>Sivanesan, Sivakumar</dc:creator>
	<dc:creator>Ismail, Hafizul Azizi</dc:creator>
	<dc:creator>Firoozi, Ali Akbar</dc:creator>
	<dc:subject xml:lang="en-US">analytical design; auxiliary power module; LLC resonant converter; simulation model; transformer</dc:subject>
	<dc:description xml:lang="en-US">This paper presents an analytical design, modelling, and simulation of an LLC resonant converter for an electric vehicle auxiliary power module (APM). The work contributes a complete LLC‑focused workflow that starts from design specifications and proceeds through: i) Resonant‑tank selection using normalized gain–frequency maps to choose the inductance ratio Ln and a quality factor Qe with soft‑switching in mind; ii) Transformer sizing from core data and loss limits; and iii) Small‑signal‑based PI controller tuning those accounts for the plant’s inherent inversion. The workflow is implemented and validated in MATLAB Simulink and PLECS for input voltages of 235-265 V and load levels from 10% to 100%. The converter achieves a peak efficiency of 98.1% within an 80.6-128.3 kHz switching range, full‑load efficiency of 93.5%, and about ±1% output voltage regulation. The controller maintains stable output settling times of 0.42-0.44 ms during 100% to 80% load steps and the reverse transition. At the highest input voltage, the switching frequency drifts beyond the intended range, which indicates a clear target for controller refinement in future work. The results show that the proposed analytical workflow is practical for designing LLC converters that meet APM efficiency and regulation goals, with cross‑platform simulation providing consistent evidence of performance.</dc:description>
	<dc:publisher xml:lang="en-US">Institute of Advanced Engineering and Science</dc:publisher>
	<dc:contributor xml:lang="en-US"></dc:contributor>
	<dc:date>2026-09-01</dc:date>
	<dc:type>info:eu-repo/semantics/article</dc:type>
	<dc:type>info:eu-repo/semantics/publishedVersion</dc:type>
	<dc:type xml:lang="en-US"></dc:type>
	<dc:format>application/pdf</dc:format>
	<dc:identifier>https://ijpeds.iaescore.com/index.php/IJPEDS/article/view/24434</dc:identifier>
	<dc:identifier>10.11591/ijpeds.v17.i3.pp1885-1901</dc:identifier>
	<dc:source xml:lang="en-US">International Journal of Power Electronics and Drive Systems (IJPEDS); Vol 17, No 3: September 2026; 1885-1901</dc:source>
	<dc:source>2722-256X</dc:source>
	<dc:source>2088-8694</dc:source>
	<dc:source>10.11591/ijpeds.v17.i3</dc:source>
	<dc:language>eng</dc:language>
	<dc:relation>https://ijpeds.iaescore.com/index.php/IJPEDS/article/view/24434/15320</dc:relation>
	<dc:rights xml:lang="en-US">Copyright (c) 2026 Mohamad Affan Mohd Noh, Jacques Juicy Patureau Ravina, Sivakumar Sivanesan, Hafizul Azizi Ismail, Ali Akbar Firoozi</dc:rights>
	<dc:rights xml:lang="en-US">http://creativecommons.org/licenses/by-sa/4.0</dc:rights>
</oai_dc:dc>