Melola Discovery

← Melola Discovery

Akses terbuka Jurnal SINTA 1

Single Phase Asymmetrical Cascaded MLI with Extreme Output Voltage Levels to Switch Ratio

International Journal of Power Electronics and Drive Systems · Vol. 9 No. 2 (2018) · hlm. 712–721

DOI
10.11591/ijpeds.v9.i2.pp712-721
ISSN
2722-256X, 2088-8694
Terbit
2018-06-01
Penerbit
Institute of Advanced Engineering and Science
Bahasa
eng
Lisensi
creativecommons.org/licenses/by-sa/4.0

Abstrak

This paper proposes an asymmetrical cascaded single phase H-bridge inverter. The proposed inverter consists of two modules with unequal and isolated dc sources. Each module is composed of dc source, conventional four switches H-bridge and single bidirectional switch. To increase the output voltage levels, the tertiary ratio, 1:3, between its two dc sources is adopted. Both the fundamental frequency and the multicarrier pulse width modulation (PWM) control schemes are employed to generate switches signals. By controlling the inverter modulation index, the proposed inverter can generate an output voltage having up to seventeen levels by using only two modules. The proposed topology has also the feature of modularity which means that it can be extended to any levels by adding new modules. The proposed topology is simulated using an inductive load and some selected simulation results have been provided to validate the proposed inverter.

Jaringan kolaborasi para penulis

16 penulis · 50 tautan kepenulisan bersama · 16 lintas organisasi

Arahkan kursor atau ketuk sebuah nama untuk menyorot rekan penulisnya. Klik dua kali untuk membuka halaman penulis.

  • Taif University
  • Aswan University
  • South Valley University
  • Menoufia University
  • Cairo University
  • Afiliasi tidak diketahui
  • Organisasi berbeda
  • Organisasi sama
  • Afiliasi tidak diketahui
  • Garis lebih tebal = lebih banyak artikel bersama · lingkaran lebih besar = lebih banyak artikel
Tampilkan sebagai tabel
Rekan penulisOrganisasiArtikel bersama
Nagy I. ElkalashyTaif University5
Ayman HoballahTaif University2
Sattam Al OtaibiTaif University2
Salah Kamal EL-SayedAfiliasi tidak diketahui1
Yasser AhmedTaif University1
Mohamed AlsharefTaif University1
Nehmdoh A. SabihaTaif University1
Ehab E. ElattarTaif University1
Ibrahim B. M. TahaTaif University1
Amr M. Abd‐ElhadyMenoufia University1
Sherif Ahmed ZaidCairo University1
Salah K. ElsayedTaif University1
Ahmed YasserTaif University1

Afiliasi berasal dari OpenAlex; metadata OAI-PMH jurnal tidak memuatnya. Penulis tanpa ID OpenAlex dicocokkan berdasarkan nama, sehingga dua orang bisa tergabung atau satu orang bisa terpisah.

Sumber metadata: OAI-PMH (metadata jurnal) http://ijpeds.iaescore.com/index.php/IJPEDS/oai, pertama di-harvest 8 Nov 2026, terakhir terlihat 16 Nov 2026.
Metadata asli (oai_dc)
<oai_dc:dc xmlns="http://www.openarchives.org/OAI/2.0/" xmlns:dc="http://purl.org/dc/elements/1.1/" xmlns:oai_dc="http://www.openarchives.org/OAI/2.0/oai_dc/" xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance" xsi:schemaLocation="http://www.openarchives.org/OAI/2.0/oai_dc/  http://www.openarchives.org/OAI/2.0/oai_dc.xsd">
	<dc:title xml:lang="en-US">Single Phase Asymmetrical Cascaded MLI with Extreme Output Voltage Levels to Switch Ratio</dc:title>
	<dc:creator>Ahmed, Mahrous</dc:creator>
	<dc:creator>Hendawi, Essam</dc:creator>
	<dc:creator>Metwaly, Mohamed K.</dc:creator>
	<dc:description xml:lang="en-US">This paper proposes an asymmetrical cascaded single phase H-bridge inverter. The proposed inverter consists of two modules with unequal and isolated dc sources. Each module is composed of dc source, conventional four switches H-bridge and single bidirectional switch. To increase the output voltage levels, the tertiary ratio, 1:3, between its two dc sources is adopted. Both the fundamental frequency and the multicarrier pulse width modulation (PWM) control schemes are employed to generate switches signals. By controlling the inverter modulation index, the proposed inverter can generate an output voltage having up to seventeen levels by using only two modules. The proposed topology has also the feature of modularity which means that it can be extended to any levels by adding new modules. The proposed topology is simulated using an inductive load and some selected simulation results have been provided to validate the proposed inverter.</dc:description>
	<dc:publisher xml:lang="en-US">Institute of Advanced Engineering and Science</dc:publisher>
	<dc:contributor xml:lang="en-US"></dc:contributor>
	<dc:date>2018-06-01</dc:date>
	<dc:type>info:eu-repo/semantics/article</dc:type>
	<dc:type>info:eu-repo/semantics/publishedVersion</dc:type>
	<dc:type xml:lang="en-US"></dc:type>
	<dc:format>application/pdf</dc:format>
	<dc:identifier>https://ijpeds.iaescore.com/index.php/IJPEDS/article/view/11176</dc:identifier>
	<dc:identifier>10.11591/ijpeds.v9.i2.pp712-721</dc:identifier>
	<dc:source xml:lang="en-US">International Journal of Power Electronics and Drive Systems (IJPEDS); Vol 9, No 2: June 2018; 712-721</dc:source>
	<dc:source>2722-256X</dc:source>
	<dc:source>2088-8694</dc:source>
	<dc:source>10.11591/ijpeds.v9.i2</dc:source>
	<dc:language>eng</dc:language>
	<dc:relation>https://ijpeds.iaescore.com/index.php/IJPEDS/article/view/11176/11211</dc:relation>
	<dc:relation>https://ijpeds.iaescore.com/index.php/IJPEDS/article/downloadSuppFile/11176/1165</dc:relation>
	<dc:rights xml:lang="en-US">Copyright (c) 2018 Mahrous Ahmed, Essam Hendawi, Mohamed K. Metwaly</dc:rights>
	<dc:rights xml:lang="en-US">http://creativecommons.org/licenses/by-sa/4.0</dc:rights>
</oai_dc:dc>