Melola Discovery

← Melola Discovery

Akses terbuka Jurnal SINTA 1

Application of inverter input rating method and standard AC voltage drop/over method on automatic transfer switch for hybrid powered e-bike charging station

International Journal of Power Electronics and Drive Systems · Vol. 15 No. 4 (2024) · hlm. 2480–2492

DOI
10.11591/ijpeds.v15.i4.pp2480-2492
ISSN
2722-256X, 2088-8694
Terbit
2024-12-01
Penerbit
Institute of Advanced Engineering and Science
Bahasa
eng
Lisensi
creativecommons.org/licenses/by-sa/4.0

Abstrak

Automatic transfer switch (ATS) is useful for integrating two different energy sources can be applied to e-bike charging stations. Renewable energy sources from sunlight using 2×100 Wp photovoltaic (PV) modules as the main source in this study, as well as grid energy sources functioned as backup energy. This ATS uses inverter input rating methods and standard AC voltage drop/over, a novelty of this study. The amount of current during testing is up to 14.09 A. The value of the inverter input voltage affects the quality of the inverter output voltage, there is a stability of the inverter output voltage from the AC voltage standard ±5% of the, lowest voltage value of (Vo_inv) = 223.9 V and the highest value (Vo_inv) = 226.1 V, at the time of (Vi_inv) max = 14.15 V and (Vi_inv) min = 12.66 V. It can be concluded that the ATS works in the PV position of the supply to the e-bike load, in the PV state it can produce power of a maximum value of 135.9 W at 11:25 am and is at the lowest power of 31 W at 03:31 pm. This ATS device in the switch mode successfully implemented a duration range of 10-21 ms, during the transfer of energy.

Kata kunci

Jaringan kolaborasi para penulis

14 penulis · 31 tautan kepenulisan bersama

Arahkan kursor atau ketuk sebuah nama untuk menyorot rekan penulisnya. Klik dua kali untuk membuka halaman penulis.

  • Politeknik Negeri Malang
  • Afiliasi tidak diketahui
  • Organisasi berbeda
  • Organisasi sama
  • Afiliasi tidak diketahui
  • Garis lebih tebal = lebih banyak artikel bersama · lingkaran lebih besar = lebih banyak artikel
Tampilkan sebagai tabel
Rekan penulisOrganisasiArtikel bersama
Ratna Ika PutriPoliteknik Negeri Malang3
Ferdian RonilayaPoliteknik Negeri Malang2
Irwan Heryanto/ErykPoliteknik Negeri Malang1
Sapto WibowoPoliteknik Negeri Malang1
Lukman HakimPoliteknik Negeri Malang1
Sapto WibowoAfiliasi tidak diketahui1
Irwan Heryanto ErykAfiliasi tidak diketahui1
Muhammad Fahmi HakimAfiliasi tidak diketahui1
Wildan Surya WijayaPoliteknik Negeri Malang1
Ratna Ika PutriPoliteknik Negeri Malang1

Afiliasi berasal dari OpenAlex; metadata OAI-PMH jurnal tidak memuatnya. Penulis tanpa ID OpenAlex dicocokkan berdasarkan nama, sehingga dua orang bisa tergabung atau satu orang bisa terpisah.

Sumber metadata: OAI-PMH (metadata jurnal) http://ijpeds.iaescore.com/index.php/IJPEDS/oai, pertama di-harvest 8 Nov 2026, terakhir terlihat 16 Nov 2026.
Metadata asli (oai_dc)
<oai_dc:dc xmlns="http://www.openarchives.org/OAI/2.0/" xmlns:dc="http://purl.org/dc/elements/1.1/" xmlns:oai_dc="http://www.openarchives.org/OAI/2.0/oai_dc/" xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance" xsi:schemaLocation="http://www.openarchives.org/OAI/2.0/oai_dc/  http://www.openarchives.org/OAI/2.0/oai_dc.xsd">
	<dc:title xml:lang="en-US">Application of inverter input rating method and standard AC voltage drop/over method on automatic transfer switch for hybrid powered e-bike charging station</dc:title>
	<dc:creator>Hidayat, Mohammad Noor</dc:creator>
	<dc:creator>Imammuddin, Azam Muzakhim</dc:creator>
	<dc:creator>Munir, Abdullah Faiq</dc:creator>
	<dc:creator>Nugroho, Aji</dc:creator>
	<dc:subject xml:lang="en-US">Automatic transfer switch; renewable energy sources; e-bike charging station; inverter input rating; standard AC voltage drop/over</dc:subject>
	<dc:description xml:lang="en-US">Automatic transfer switch (ATS) is useful for integrating two different energy sources can be applied to e-bike charging stations. Renewable energy sources from sunlight using 2×100 Wp photovoltaic (PV) modules as the main source in this study, as well as grid energy sources functioned as backup energy. This ATS uses inverter input rating methods and standard AC voltage drop/over, a novelty of this study. The amount of current during testing is up to 14.09 A. The value of the inverter input voltage affects the quality of the inverter output voltage, there is a stability of the inverter output voltage from the AC voltage standard ±5% of the, lowest voltage value of (Vo_inv) = 223.9 V and the highest value (Vo_inv) = 226.1 V, at the time of (Vi_inv) max = 14.15 V and (Vi_inv) min = 12.66 V. It can be concluded that the ATS works in the PV position of the supply to the e-bike load, in the PV state it can produce power of a maximum value of 135.9 W at 11:25 am and is at the lowest power of 31 W at 03:31 pm. This ATS device in the switch mode successfully implemented a duration range of 10-21 ms, during the transfer of energy.</dc:description>
	<dc:publisher xml:lang="en-US">Institute of Advanced Engineering and Science</dc:publisher>
	<dc:contributor xml:lang="en-US">State Polytechnic of Malang</dc:contributor>
	<dc:date>2024-12-01</dc:date>
	<dc:type>info:eu-repo/semantics/article</dc:type>
	<dc:type>info:eu-repo/semantics/publishedVersion</dc:type>
	<dc:type xml:lang="en-US"></dc:type>
	<dc:format>application/pdf</dc:format>
	<dc:identifier>https://ijpeds.iaescore.com/index.php/IJPEDS/article/view/23560</dc:identifier>
	<dc:identifier>10.11591/ijpeds.v15.i4.pp2480-2492</dc:identifier>
	<dc:source xml:lang="en-US">International Journal of Power Electronics and Drive Systems (IJPEDS); Vol 15, No 4: December 2024; 2480-2492</dc:source>
	<dc:source>2722-256X</dc:source>
	<dc:source>2088-8694</dc:source>
	<dc:source>10.11591/ijpeds.v15.i4</dc:source>
	<dc:language>eng</dc:language>
	<dc:relation>https://ijpeds.iaescore.com/index.php/IJPEDS/article/view/23560/14808</dc:relation>
	<dc:rights xml:lang="en-US">Copyright (c) 2024 Mohammad Noor Hidayat, Azam Muzakhim Imammuddin, Abdullah Faiq Munir, Aji Nugroho</dc:rights>
	<dc:rights xml:lang="en-US">http://creativecommons.org/licenses/by-sa/4.0</dc:rights>
</oai_dc:dc>