Melola Discovery

← Melola Discovery

Akses terbuka Jurnal SINTA 1

Novel DTC induction machine drive improvement using controlled rectifier for DC voltage tuning

International Journal of Power Electronics and Drive Systems · Vol. 10 No. 3 (2019) · hlm. 1223–1228

DOI
10.11591/ijpeds.v10.i3.pp1223-1228
ISSN
2722-256X, 2088-8694
Terbit
2019-09-01
Penerbit
Institute of Advanced Engineering and Science
Bahasa
eng
Lisensi
creativecommons.org/licenses/by-sa/4.0

Abstrak

The application of the direct torque control strategy for induction machine drives is mainly characterized by torque and flux distortions caused by voltage vector limitation. The goal of this paper is to perform the conventional DTC induction machine drives and reduce ripples of both flux and torque response. The proposed contribution is based on the control of the DC output side of the rectifier feeding the voltage source inverter by means of PI controller in order to adapt the voltage vector used in typical DTC switching table. Mathematic models are built using MATLAB Simulink and programming environment; the simulation results show the difference between the proposed method and classical DTC.

Jaringan kolaborasi para penulis

21 penulis · 48 tautan kepenulisan bersama · 12 lintas organisasi

Arahkan kursor atau ketuk sebuah nama untuk menyorot rekan penulisnya. Klik dua kali untuk membuka halaman penulis.

  • University of Bechar
  • Ahmed Draia University
  • Centre Universitaire Nour Bachir El Bayadh
  • Afiliasi tidak diketahui
  • Organisasi berbeda
  • Organisasi sama
  • Afiliasi tidak diketahui
  • Garis lebih tebal = lebih banyak artikel bersama · lingkaran lebih besar = lebih banyak artikel
Tampilkan sebagai tabel
Rekan penulisOrganisasiArtikel bersama
Othmane AbdelkhalekUniversity of Bechar2
Mohammed Amine SoumeurUniversity of Bechar2
Benhamou AissaAfiliasi tidak diketahui2
Yacine GuettafCentre Universitaire Nour Bachir El Bayadh2
Khelifa BenahmedUniversity of Bechar1
Boubakeur HamliliUniversity of Bechar1
Imane ChaoufiAfiliasi tidak diketahui1
Hartani Mohammed AmineAhmed Draia University1
Oussama HafsiUniversity of Bechar1
Abdeselem ChakarUniversity of Bechar1
Abdelfatah NasriUniversity of Bechar1
Abdesselam AbderrahmaniAfiliasi tidak diketahui1
Hassane BachiriUniversity of Bechar1
Abdelkader GhezouaniUniversity of Bechar1
Nouria NairUniversity of Bechar1
Talebi AbderrahmaneAfiliasi tidak diketahui1
Asma BenayadAhmed Draia University1
Saïd BentoubaAhmed Draia University1

Afiliasi berasal dari OpenAlex; metadata OAI-PMH jurnal tidak memuatnya. Penulis tanpa ID OpenAlex dicocokkan berdasarkan nama, sehingga dua orang bisa tergabung atau satu orang bisa terpisah.

Sumber metadata: OAI-PMH (metadata jurnal) http://ijpeds.iaescore.com/index.php/IJPEDS/oai, pertama di-harvest 8 Nov 2026, terakhir terlihat 16 Nov 2026.
Metadata asli (oai_dc)
<oai_dc:dc xmlns="http://www.openarchives.org/OAI/2.0/" xmlns:dc="http://purl.org/dc/elements/1.1/" xmlns:oai_dc="http://www.openarchives.org/OAI/2.0/oai_dc/" xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance" xsi:schemaLocation="http://www.openarchives.org/OAI/2.0/oai_dc/  http://www.openarchives.org/OAI/2.0/oai_dc.xsd">
	<dc:title xml:lang="en-US">Novel DTC induction machine drive improvement using controlled rectifier for DC voltage tuning</dc:title>
	<dc:creator>Mohamed, Nour</dc:creator>
	<dc:creator>Hamza, Tedjini</dc:creator>
	<dc:creator>Brahim, Gasbaoui</dc:creator>
	<dc:description xml:lang="en-US">The application of the direct torque control strategy for induction machine drives is mainly characterized by torque and flux distortions caused by voltage vector limitation. The goal of this paper is to perform the conventional DTC induction machine drives and reduce ripples of both flux and torque response. The proposed contribution is based on the control of the DC output side of the rectifier feeding the voltage source inverter by means of PI controller in order to adapt the voltage vector used in typical DTC switching table. Mathematic models are built using MATLAB Simulink and programming environment; the simulation results show the difference between the proposed method and classical DTC.</dc:description>
	<dc:publisher xml:lang="en-US">Institute of Advanced Engineering and Science</dc:publisher>
	<dc:contributor xml:lang="en-US"></dc:contributor>
	<dc:date>2019-09-01</dc:date>
	<dc:type>info:eu-repo/semantics/article</dc:type>
	<dc:type>info:eu-repo/semantics/publishedVersion</dc:type>
	<dc:type xml:lang="en-US"></dc:type>
	<dc:format>application/pdf</dc:format>
	<dc:identifier>https://ijpeds.iaescore.com/index.php/IJPEDS/article/view/11420</dc:identifier>
	<dc:identifier>10.11591/ijpeds.v10.i3.pp1223-1228</dc:identifier>
	<dc:source xml:lang="en-US">International Journal of Power Electronics and Drive Systems (IJPEDS); Vol 10, No 3: September 2019; 1223-1228</dc:source>
	<dc:source>2722-256X</dc:source>
	<dc:source>2088-8694</dc:source>
	<dc:source>10.11591/ijpeds.v10.i3</dc:source>
	<dc:language>eng</dc:language>
	<dc:relation>https://ijpeds.iaescore.com/index.php/IJPEDS/article/view/11420/12844</dc:relation>
	<dc:rights xml:lang="en-US">Copyright (c) 2019 Nour Mohamed, Tedjini Hamza, Gasbaoui Brahim</dc:rights>
	<dc:rights xml:lang="en-US">http://creativecommons.org/licenses/by-sa/4.0</dc:rights>
</oai_dc:dc>