Melola Discovery

← Melola Discovery

Akses terbuka Jurnal SINTA 1

Fault tolerance of asymmetrical six-phase induction machine during single open circuit fault to three open circuit faults using GUI

International Journal of Power Electronics and Drive Systems · Vol. 11 No. 2 (2020) · hlm. 611–617

DOI
10.11591/ijpeds.v11.i2.pp611-617
ISSN
2722-256X, 2088-8694
Terbit
2020-06-01
Penerbit
Institute of Advanced Engineering and Science
Bahasa
eng
Lisensi
creativecommons.org/licenses/by-sa/4.0

Abstrak

The fault tolerance of multiphase drive is favourable in the industry for its reliability and safety reasons. However, from the educational point of view, the post-fault capability of six-phase machine is still unclear. This paper presents the fault tolerance of asymmetrical six-phase induction machine (A6-IM) under one to three open-circuit faults using Graphical User Interface (GUI). In this study, the capability of A6-IM has been interpreted through a simple and user-friendly GUI helping students to have a better understanding on the current limits of A6-IM. The optimization of post-fault current references is based on maximum torque (MT) and minimum loss (ML). This work provides GUI highlighting the post-fault derating of A6-IM with single isolated neutral (1N) in two different modes namely MT and ML for educational purposes.

Jaringan kolaborasi para penulis

38 penulis · 111 tautan kepenulisan bersama · 48 lintas organisasi

Arahkan kursor atau ketuk sebuah nama untuk menyorot rekan penulisnya. Klik dua kali untuk membuka halaman penulis.

  • Universiti Teknologi MARA
  • University of Malaya
  • Asia Pacific University of Technology & Innovation
  • American University of Ras Al Khaimah
  • Queen's University
  • Universiti Teknikal Malaysia Melaka
  • Sidi Mohamed Ben Abdellah University
  • Organisasi lain
  • Afiliasi tidak diketahui
  • Organisasi berbeda
  • Organisasi sama
  • Afiliasi tidak diketahui
  • Garis lebih tebal = lebih banyak artikel bersama · lingkaran lebih besar = lebih banyak artikel
Tampilkan sebagai tabel
Rekan penulisOrganisasiArtikel bersama
Rahimi BaharomUniversiti Teknologi MARA12
Hussain AttiaAmerican University of Ras Al Khaimah2
Ahmad ElkhatebQueen's University2
Muhamad Nabil Bin HidayatUniversiti Teknologi MARA2
Nooradzianie Muhammad ZinTun Hussein Onn University of Malaysia2
Ahmad Farid AbidinUniversiti Teknologi MARA2
Mohamad Fathi Mohamad EliasUniversity of Malaya2
Nor Farahaida Abdul RahmanUniversiti Teknologi MARA2
Siti Zaliha Mohammad NoorUniversiti Teknologi MARA2
Muhammad Hakiem HayromanUniversiti Teknologi MARA2
Tan Kheng Suan FreddyAsia Pacific University of Technology & Innovation1
Muhammad Nizam KamarudinUniversiti Teknikal Malaysia Melaka1
Muhammad Iqbal ZakariaUniversiti Teknologi MARA1
Nabil El FezaziSidi Mohamed Ben Abdellah University1
Athirah Batrisyia Kamal AriffinUniversiti Teknologi MARA1
Mohd Shukri Mohd GhazaliUniversiti Teknologi MARA1
Dylan Dah‐Chuan LuUniversity of Technology Sydney1
Siti Zaliha Mohammad NoorUniversiti Teknologi MARA1
Faranadia Abdul HarisUniversiti Teknologi MARA1
Fajariah KadirUniversiti Teknologi MARA1
Muhammad Ammirrul Atiqi Mohd ZainuriNational University of Malaysia1
Naeem M. S. HannoonUniversiti Teknologi MARA1
Nabil M. HidayatUniversiti Teknologi MARA1
Dalina JohariUniversiti Teknologi MARA1
Dygku Aniqnatasa Awg OsmanUniversiti Teknologi MARA1
Ahmad Ihsan Mohd YassinUniversiti Teknologi MARA1
Zafirah ZainuddinUniversiti Teknologi MARA1
Tan Kheng Suan FreddyAsia Pacific University of Technology & Innovation1
Nor Zaihar YahayaUniversiti Teknologi Petronas1
Mohammad Nawawi SerojiUniversiti Teknologi MARA1
Wan Muhamad Hakimi Wan BunyaminUniversiti Teknologi MARA1
Mohd Zaid ZolkifflyAfiliasi tidak diketahui1
Ahmad Sukri AhmadPETRONAS Research Sdn Bhd (Malaysia)1

Afiliasi berasal dari OpenAlex; metadata OAI-PMH jurnal tidak memuatnya. Penulis tanpa ID OpenAlex dicocokkan berdasarkan nama, sehingga dua orang bisa tergabung atau satu orang bisa terpisah.

Sumber metadata: OAI-PMH (metadata jurnal) http://ijpeds.iaescore.com/index.php/IJPEDS/oai, pertama di-harvest 8 Nov 2026, terakhir terlihat 16 Nov 2026.
Metadata asli (oai_dc)
<oai_dc:dc xmlns="http://www.openarchives.org/OAI/2.0/" xmlns:dc="http://purl.org/dc/elements/1.1/" xmlns:oai_dc="http://www.openarchives.org/OAI/2.0/oai_dc/" xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance" xsi:schemaLocation="http://www.openarchives.org/OAI/2.0/oai_dc/  http://www.openarchives.org/OAI/2.0/oai_dc.xsd">
	<dc:title xml:lang="en-US">Fault tolerance of asymmetrical six-phase induction machine during single open circuit fault to three open circuit faults using GUI</dc:title>
	<dc:creator>Rahman, Ungku Mohamed Ismail Adrian Ungku Abdul</dc:creator>
	<dc:creator>Munim, Wan Noraishah Wan Abdul</dc:creator>
	<dc:creator>Che, Hang Seng</dc:creator>
	<dc:creator>Tousizadeh, Mahdi</dc:creator>
	<dc:creator>Muhammad, Khairul Safuan</dc:creator>
	<dc:description xml:lang="en-US">The fault tolerance of multiphase drive is favourable in the industry for its reliability and safety reasons. However, from the educational point of view, the post-fault capability of six-phase machine is still unclear. This paper presents the fault tolerance of asymmetrical six-phase induction machine (A6-IM) under one to three open-circuit faults using Graphical User Interface (GUI). In this study, the capability of A6-IM has been interpreted through a simple and user-friendly GUI helping students to have a better understanding on the current limits of A6-IM. The optimization of post-fault current references is based on maximum torque (MT) and minimum loss (ML). This work provides GUI highlighting the post-fault derating of A6-IM with single isolated neutral (1N) in two different modes namely MT and ML for educational purposes.</dc:description>
	<dc:publisher xml:lang="en-US">Institute of Advanced Engineering and Science</dc:publisher>
	<dc:contributor xml:lang="en-US"></dc:contributor>
	<dc:date>2020-06-01</dc:date>
	<dc:type>info:eu-repo/semantics/article</dc:type>
	<dc:type>info:eu-repo/semantics/publishedVersion</dc:type>
	<dc:type xml:lang="en-US"></dc:type>
	<dc:format>application/pdf</dc:format>
	<dc:identifier>https://ijpeds.iaescore.com/index.php/IJPEDS/article/view/20549</dc:identifier>
	<dc:identifier>10.11591/ijpeds.v11.i2.pp611-617</dc:identifier>
	<dc:source xml:lang="en-US">International Journal of Power Electronics and Drive Systems (IJPEDS); Vol 11, No 2: June 2020; 611-617</dc:source>
	<dc:source>2722-256X</dc:source>
	<dc:source>2088-8694</dc:source>
	<dc:source>10.11591/ijpeds.v11.i2</dc:source>
	<dc:language>eng</dc:language>
	<dc:relation>https://ijpeds.iaescore.com/index.php/IJPEDS/article/view/20549/13066</dc:relation>
	<dc:rights xml:lang="en-US">Copyright (c) 2020 Ungku Mohamed Ismail Adrian Ungku Abdul Rahman, Wan Noraishah Wan Abdul Munim, Hang Seng Che, Mahdi Tousizadeh, Khairul Safuan Muhammad</dc:rights>
	<dc:rights xml:lang="en-US">http://creativecommons.org/licenses/by-sa/4.0</dc:rights>
</oai_dc:dc>