An autonomous micro hydro power plant was proposed to utilize the small hydro power potency as a run-of-river. It consisted of a PMSG, a DFIG, and a converter and should be operated in the off-grid configuration. In a previous research, the DFIG stator voltages couldn’t be controlled. In this paper, the novel control algorithm that is able to maintain the DFIG stator voltages of the autonomous micro hydro power plant in the off-grid configuration is proposed. The control algorithm was proposed to use the actual DFIG stator voltages and currents as feedback signals. The controller was tested by varying three input signals, i.e. the DC-link voltage, the DFIG stator voltage reference, and the external stator load which simulated the off-grid configuration. The result of the simulation showed that the DFIG stator voltages could be controlled and were always in accordance with the reference.
Jaringan kolaborasi para penulis
13 penulis ·
23 tautan kepenulisan bersama
· 4 lintas organisasi
Arahkan kursor atau ketuk sebuah nama untuk menyorot rekan penulisnya. Klik dua kali untuk membuka halaman penulis.
University of Indonesia
Universitas Muhammadiyah Jakarta
Sultan Agung Islamic University
Afiliasi tidak diketahui
Organisasi berbeda
Organisasi sama
Afiliasi tidak diketahui
Garis lebih tebal = lebih banyak artikel bersama · lingkaran lebih besar = lebih banyak artikel
Afiliasi berasal dari OpenAlex; metadata OAI-PMH jurnal tidak memuatnya. Penulis tanpa ID OpenAlex dicocokkan berdasarkan nama, sehingga dua orang bisa tergabung atau satu orang bisa terpisah.