Melola Discovery

← Melola Discovery

Akses terbuka Jurnal SINTA 1

A Review Work on High Frequency Induction Curing of Porous Asphalt Concrete

International Journal of Power Electronics and Drive Systems · Vol. 7 No. 3 (2016) · hlm. 872–879

DOI
10.11591/ijpeds.v7.i3.pp872-879
ISSN
2722-256X, 2088-8694
Terbit
2016-09-01
Penerbit
Institute of Advanced Engineering and Science
Bahasa
eng
Lisensi
creativecommons.org/licenses/by-sa/4.0

Abstrak

Induction heating method is a well known process to produce heat in a localized area on a susceptible metallic object. High frequency power, a work coil and an ancillary instrument part is the basis of induction heating. It is used in industrial and domestic areas where uniform and rapid heating is absolutely essential. As it is highly needed, in this research work, the effectiveness of induction heating will be verified by different curing methods. Firstly to initiate the asphalt concrete curing by high frequency induction heating so that the concrete become durable, electrically conductive and appropriately adjusted for induction heating, steel wire mesh / GI wire mesh is employed which is a good conductor of electricity. Now when micro cracks are likely to occur in asphalt product, the temperature of the asphalt material can be made high by induction heating of the steel wire mesh / GI wire mesh due to which the micro cracks are repaired itself and cracks are repaired by the increased temperature curing of bitumen by the physical process of diffusion and flow of the material. Consequent upon the repair, pre repair of small cracks, major cracks fail to occur protecting the road and thus ravelling of the road prevented to a great extent.

Jaringan kolaborasi para penulis

30 penulis · 69 tautan kepenulisan bersama · 29 lintas organisasi

Arahkan kursor atau ketuk sebuah nama untuk menyorot rekan penulisnya. Klik dua kali untuk membuka halaman penulis.

  • Indian Institute of Technology Dhanbad
  • Saroj Mohan Institute of Technology
  • National Institute of Technology Meghalaya
  • Techno India Group (India)
  • University of Burdwan
  • KIIT University
  • Maulana Abul Kalam Azad University of Technology, West Bengal
  • Organisasi lain
  • Afiliasi tidak diketahui
  • Organisasi berbeda
  • Organisasi sama
  • Afiliasi tidak diketahui
  • Garis lebih tebal = lebih banyak artikel bersama · lingkaran lebih besar = lebih banyak artikel
Tampilkan sebagai tabel
Rekan penulisOrganisasiArtikel bersama
Nitai PalIndian Institute of Technology Dhanbad8
Avijit ChakrabortyIndian Institute of Technology Dhanbad4
Palash PalSaroj Mohan Institute of Technology4
Alok Kumar ShrivastavTechno India Group (India)4
Ankur GangulyTechno India Group (India)3
Kallol BhaumikSaroj Mohan Institute of Technology2
Saumen DharaSaroj Mohan Institute of Technology2
Niladri DasIndian Institute of Technology Dhanbad1
Moumita SadhuAfiliasi tidak diketahui1
Suprava ChakrabortyAfiliasi tidak diketahui1
Sourish SanyalAfiliasi tidak diketahui1
Sourish SanyalAfiliasi tidak diketahui1
Debabrata RoyAfiliasi tidak diketahui1
Pritish Kumar GhoshAfiliasi tidak diketahui1
Amarnath SanyalAfiliasi tidak diketahui1
Himanshu SharmaIndian Institute of Technology Dhanbad1
Yaduvir SinghIndian Institute of Technology Dhanbad1
Soumya DasUniversity of Burdwan1
Gourav MajumdarKIIT University1
Saswata MukherjeeMaulana Abul Kalam Azad University of Technology, West Bengal1
Arijit ChakrabartiIndian Institute of Technology Dhanbad1
Titas Kumar NagAfiliasi tidak diketahui1
Atif IqbalQatar University1
Ahmed RiyazIndian Institute of Technology Dhanbad1
Md Abdullah AnsariAix-Marseille Université1
Chiranjit SainNational Institute of Technology Meghalaya1
Pabitra Kumar Biswas⃰Afiliasi tidak diketahui1

Afiliasi berasal dari OpenAlex; metadata OAI-PMH jurnal tidak memuatnya. Penulis tanpa ID OpenAlex dicocokkan berdasarkan nama, sehingga dua orang bisa tergabung atau satu orang bisa terpisah.

Sumber metadata: OAI-PMH (metadata jurnal) http://ijpeds.iaescore.com/index.php/IJPEDS/oai, pertama di-harvest 8 Nov 2026, terakhir terlihat 16 Nov 2026.
Metadata asli (oai_dc)
<oai_dc:dc xmlns="http://www.openarchives.org/OAI/2.0/" xmlns:dc="http://purl.org/dc/elements/1.1/" xmlns:oai_dc="http://www.openarchives.org/OAI/2.0/oai_dc/" xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance" xsi:schemaLocation="http://www.openarchives.org/OAI/2.0/oai_dc/  http://www.openarchives.org/OAI/2.0/oai_dc.xsd">
	<dc:title xml:lang="en-US">A Review Work on High Frequency Induction Curing of Porous Asphalt Concrete</dc:title>
	<dc:creator>Neogi, Kaushik</dc:creator>
	<dc:creator>Sadhu, Pradip Kumar</dc:creator>
	<dc:creator>Banerjee, Atanu</dc:creator>
	<dc:description xml:lang="en-US">Induction heating method is a well known process to produce heat in a localized area on a susceptible metallic object. High frequency power, a work coil and an ancillary instrument part is the basis of induction heating. It is used in industrial and domestic areas where uniform and rapid heating is absolutely essential. As it is highly needed, in this research work, the effectiveness of induction heating will be verified by different curing methods. Firstly to initiate the asphalt concrete curing by high frequency induction heating so that the concrete become durable, electrically conductive and appropriately adjusted for induction heating, steel wire mesh / GI wire mesh is employed which is a good conductor of electricity. Now when micro cracks are likely to occur in asphalt product, the temperature of the asphalt material can be made high by induction heating of the steel wire mesh / GI wire mesh due to which the micro cracks are repaired itself and cracks are repaired by the increased temperature curing of bitumen by the physical process of diffusion and flow of the material. Consequent upon the repair, pre repair of small cracks, major cracks fail to occur protecting the road and thus ravelling of the road prevented to a great extent.</dc:description>
	<dc:publisher xml:lang="en-US">Institute of Advanced Engineering and Science</dc:publisher>
	<dc:contributor xml:lang="en-US"></dc:contributor>
	<dc:date>2016-09-01</dc:date>
	<dc:type>info:eu-repo/semantics/article</dc:type>
	<dc:type>info:eu-repo/semantics/publishedVersion</dc:type>
	<dc:type xml:lang="en-US"></dc:type>
	<dc:format>application/pdf</dc:format>
	<dc:identifier>https://ijpeds.iaescore.com/index.php/IJPEDS/article/view/5267</dc:identifier>
	<dc:identifier>10.11591/ijpeds.v7.i3.pp872-879</dc:identifier>
	<dc:source xml:lang="en-US">International Journal of Power Electronics and Drive Systems (IJPEDS); Vol 7, No 3: September 2016; 872-879</dc:source>
	<dc:source>2722-256X</dc:source>
	<dc:source>2088-8694</dc:source>
	<dc:source>10.11591/ijpeds.v7.i3</dc:source>
	<dc:language>eng</dc:language>
	<dc:relation>https://ijpeds.iaescore.com/index.php/IJPEDS/article/view/5267/5488</dc:relation>
	<dc:rights xml:lang="en-US">Copyright (c) 2016 Kaushik Neogi, Pradip Kumar Sadhu, Atanu Banerjee</dc:rights>
	<dc:rights xml:lang="en-US">http://creativecommons.org/licenses/by-sa/4.0</dc:rights>
</oai_dc:dc>