Melola Discovery

← Melola Discovery

Akses terbuka Jurnal SINTA 1

Buck-Converter Photovoltaic Simulator

International Journal of Power Electronics and Drive Systems · Vol. 1 No. 2 (2011) · hlm. 156–167

ISSN
2722-256X, 2088-8694
Terbit
2011-10-29
Penerbit
Institute of Advanced Engineering and Science
Bahasa
eng
Lisensi
creativecommons.org/licenses/by-sa/4.0

Abstrak

This paper presents a Photovoltaic Simulator Simulation using Buck Converter with analysis using bode diagram. A state space simulator model is derived to provide a detail non-linear model. The PV Static Model is modified by adding a low pass filter in order to avoid an algebraic loop problem and able to analyze easier. PV simulator is realized by controlling buck converter’s current using PI Controller with reference from PV model. Then the model is linearized which is used for analysis purpose. The system is analyzed using bode diagram for its output voltage against its inputs of solar irradiance and cell’s temperature. The Load, Proportional Gain Kp, and Integral Gain Ki are varied to observe their effects into the system stability. It is noticed that the limits of gain stability system are so high at all values of load and gains so the Buck-Converter Photovoltaic Simulator, which is proposed here, can be declared as a robust system.DOI: http://dx.doi.org/10.11591/ijpeds.v1i2.92

Jaringan kolaborasi para penulis

11 penulis · 22 tautan kepenulisan bersama

Arahkan kursor atau ketuk sebuah nama untuk menyorot rekan penulisnya. Klik dua kali untuk membuka halaman penulis.

  • University of Indonesia
  • Afiliasi tidak diketahui
  • Organisasi berbeda
  • Organisasi sama
  • Afiliasi tidak diketahui
  • Garis lebih tebal = lebih banyak artikel bersama · lingkaran lebih besar = lebih banyak artikel
Tampilkan sebagai tabel
Rekan penulisOrganisasiArtikel bersama
Ridwan GunawanUniversity of Indonesia1
Rian SuryadiningratAfiliasi tidak diketahui1
Aries SubiantoroAfiliasi tidak diketahui1
M. ShanizalAfiliasi tidak diketahui1
A. SubiantoroAfiliasi tidak diketahui1
R. GunawanAfiliasi tidak diketahui1

Afiliasi berasal dari OpenAlex; metadata OAI-PMH jurnal tidak memuatnya. Penulis tanpa ID OpenAlex dicocokkan berdasarkan nama, sehingga dua orang bisa tergabung atau satu orang bisa terpisah.

Sumber metadata: OAI-PMH (metadata jurnal) http://ijpeds.iaescore.com/index.php/IJPEDS/oai, pertama di-harvest 8 Nov 2026, terakhir terlihat 16 Nov 2026.
Metadata asli (oai_dc)
<oai_dc:dc xmlns="http://www.openarchives.org/OAI/2.0/" xmlns:dc="http://purl.org/dc/elements/1.1/" xmlns:oai_dc="http://www.openarchives.org/OAI/2.0/oai_dc/" xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance" xsi:schemaLocation="http://www.openarchives.org/OAI/2.0/oai_dc/  http://www.openarchives.org/OAI/2.0/oai_dc.xsd">
	<dc:title xml:lang="en-US">Buck-Converter Photovoltaic Simulator</dc:title>
	<dc:creator>Yusivar, Feri</dc:creator>
	<dc:creator>Farabi, M. Y.</dc:creator>
	<dc:creator>Suryadiningrat, R.</dc:creator>
	<dc:creator>Ananduta, W. W.</dc:creator>
	<dc:creator>Syaifudin, Y.</dc:creator>
	<dc:description xml:lang="en-US">This paper presents a Photovoltaic Simulator Simulation using Buck Converter with analysis using bode diagram. A state space simulator model is derived to provide a detail non-linear model. The PV Static Model is modified by adding a low pass filter in order to avoid an algebraic loop problem and able to analyze easier. PV simulator is realized by controlling buck converter’s current using PI Controller with reference from PV model. Then the model is linearized which is used for analysis purpose. The system is analyzed using bode diagram for its output voltage against its inputs of solar irradiance and cell’s temperature. The Load, Proportional Gain Kp, and Integral Gain Ki are varied to observe their effects into the system stability. It is noticed that the limits of gain stability system are so high at all values of load and gains so the Buck-Converter Photovoltaic Simulator, which is proposed here, can be declared as a robust system.DOI: http://dx.doi.org/10.11591/ijpeds.v1i2.92</dc:description>
	<dc:publisher xml:lang="en-US">Institute of Advanced Engineering and Science</dc:publisher>
	<dc:contributor xml:lang="en-US"></dc:contributor>
	<dc:date>2011-10-29</dc:date>
	<dc:type>info:eu-repo/semantics/article</dc:type>
	<dc:type>info:eu-repo/semantics/publishedVersion</dc:type>
	<dc:type xml:lang="en-US"></dc:type>
	<dc:format>application/pdf</dc:format>
	<dc:identifier>https://ijpeds.iaescore.com/index.php/IJPEDS/article/view/4874</dc:identifier>
	<dc:source xml:lang="en-US">International Journal of Power Electronics and Drive Systems (IJPEDS); Vol 1, No 2: December 2011; 156-167</dc:source>
	<dc:source>2722-256X</dc:source>
	<dc:source>2088-8694</dc:source>
	<dc:source>10.11591/ijpeds.v1.i2</dc:source>
	<dc:language>eng</dc:language>
	<dc:relation>https://ijpeds.iaescore.com/index.php/IJPEDS/article/view/4874/4263</dc:relation>
	<dc:rights xml:lang="en-US">Copyright (c) 2011 Feri Yusivar, M. Y. Farabi, R. Suryadiningrat, W. W. Ananduta, Y. Syaifudin</dc:rights>
	<dc:rights xml:lang="en-US">http://creativecommons.org/licenses/by-sa/4.0</dc:rights>
</oai_dc:dc>